 |
IE-1
Frequency Response 20~20,000 Hz
Transducer Type Dynamic
Impedance 16Ω
Sensitivity (at 1000Hz) 114 dB/mW
Distortion Less than 0.3%
Cord Length 148cm with Ø3.5 stereo plug
Net Weight 6 grams (cable excluded)
|
|
| |
|
 |
IE-6
Driver Dual balanced armatures(Single Hi/Single Low)with a passive crossover
Frequency Response 20~18000 Hz
Impedance 22Ω
Sensitivity (at 1000Hz) 120 dB/mW
Max. Input Power 150mW
Distortion Less than 0.3%
Cord length 140cm
Net Weight 7 grams (excluding cable)
Output Connector Gold-plated Ø3.5mm phone, Stereo
Option. Dual Plug Airline adaptor, 1/4” Adaptor (6.3mm)
Standard Carrying Case
Accessories Cleaning Rod, Three pairs of Silicon Sleeves (small, medium, and large)
|
|
| |
|
 |
SIEM-111R
S/N Ratio: 80 dB (A Weighted)
Image Rejection: 80 dB
Channel Separation: 35 dB
Frequency Response: 60~15,000 Hz (-3dB)
T.H.D.: 1% Typical
Frequency Stability: ±10KHz
Input Level Select Switch 0dB / -10dB
Earphone Output. 60 mW
Minimum Load Impedance 16Ω
LCD Display RF Level, Lock-On, Battery Fuel Gauge, Stereo/Mono, HF booster,
Dynamic Limiter, Group, Channel, Mute, Frequency
Output Connector 1/8” Stereo Phone Jack
Power Supply 2 AA batteries
Operation Hour. Over 12 hours
|
|
| |
|
 |
SIEM-111T
arrier Frequency Range 502~960 MHz
RF Output Power 10 mW
Nominal Frequency Deviation
(modulation) ±40KHz
Audio Input Impedance 20kΩ
Nominal Input Level -10 dBV ; 0 dBV (ATT-10 dBV)
Maximal Input Level 10 dBV ; 20 dBV (ATT-10 dBV)
LCD Display AF Level, Stereo/Mono, Attenuation Level, Group, Channel, Frequency
Audio Input Connector 2 x Balanced XLR /Ø6.3mm phone Combo Socket
Audio Output Connector 1 x 1/8” Stereo Phone Jack
1 x 1/4” Stereo Phone Jack
Loop Out Connector 2 x Balanced Loop Out Socket
Switching Power Supply 100-240V Switching power supply
|
|
| |
|
 |
SIEM-2R
Frequency Preparation PLL Synthesized Control
Carrier Frequency Range 502~960 MHz
LED Display Channel
Controls Power On/Off,
Channel selection,
Volume control
Audio Frequency Response 40~18,000 Hz
Output connector 1/8” Dummy stereo Phone Jack
Battery life 14 hours typical
Battery 2 AA batteries
|
|
| |
|
 |
SIEM-2T Mono
Carrier Frequency Range 502~960 MHz
RF Output Power 10 mW
Nominal Frequency Deviation (modulation) ±40KHz
Audio Input Impedance 20kΩ
Nominal Input Level -20 dBV
Maximal Input Level 0 dBV
LED Display AF Level, Channel
Audio Input Connector 2 x Balanced XLR
Loop Out Connector 2 x Ø6.3mm Balanced Loop Out Socket
Operation Voltage 12-18 VDC, 600 mA
|
|
| |
|
|
