Ürünler / Ses Sistemleri / Paudio

 
Aksesuarlar
» Prima
» Paudio
Hard Case Çeşitleri
» Metal Rack
» Prima
HI-FI Sistemler
» DCA Cinema Surround Kabinler
Konferans Sistemi
» JTS CS
Kablolar - Konnektör
» Score
» Prima
» Pro-nica
» Aksesuarlar
Mikrofonlar
» Tour Guide Sistem
- Chiayo
» Boundary Mikrofonlar
- JTS
» Drum Kitler
- JTS
» Koro ve Sunum Mikrofonları
- JTS
» Dinamik Mikrofonlar
- Score
- JTS
» Gosseneck Mikrofonlar
- JTS
» Headsetler
- Chiayo
- JTS
» Wireless Anten Sistemleri
» EAR Monitör Sistemleri
- JTS
» Yaka Mikrofonları
- Prima
- Score
» Kablolu Mikrofonlar
- Gemini
- Doppler
» Telsiz Mikrofonlar
- Chiayo
- JTS
- Mascot
Dj Ürünleri
» Midi Controller / Digital Dj
- Gemini
» Dj Aksesuarları
- Gemini
- Cortex
- İkey
- LD
» Pikaplar
- Gemini
» CD Player
- Cortex
- Gemini
» Dj Mikserleri
- Eagletech
- Gemini
Ses Prosesörleri
» Eagletech
» Gemini
Amplifikatörler
» Score 100V Pa Sistemler
» Prima 100V Sistemler
» Score Portatif Anfiler
» Biema Power Anfiler
» Alto Power Anfiler
» Gemini
» Bachy
» Eagletech
Power Mixer ve Ses Mixerleri
» Prima Power Mikserler
» Biema Power Mikserler
» Alto Power Mikserler
» LD
» Eagletech
Hoparlörler
» Score Driver & Unitler
» Celestion
» Prima
» Biema
» Paudio
» Alto
» CTS
» Fane
» Eminence
» Eagletech
Carol
» Megafonlar
» El Mikrofonları
» Masa Tipi Mikrofonlar
» Bateri Seti
VİEW IMF-HP18B data sheet

VİEW IMF-HP18B data sheet

ÖZELLİKLER :

The P Audio IMF-HP18B NEW is a high output low frequency transducer. The IMF-HP18B NEW is an upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the IMF-HP18B NEW is 35Hz to 500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The IMF-HP18B NEW employs a large format 4 inch (101.6mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The IMF-HP18B NEW utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW SD15R100 data sheet

VİEW SD15R100 data sheet

ÖZELLİKLER :

The P Audio SD15R100 is a high output wide bandwidth transducer. The SD15R100 is a highly upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 40Hz to 2000Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD15R100 has been optimized for use in two way or three way sound reinforcement systems. The SD15R100 employs a large format 4 inch (101.6mm) diameter voicecoil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The SD15R100 utilizes P Audios Auto Balanced-Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology in an inside/outside geometry to insure very high conversion efficiency.The P Audio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The SD15R100 also features a double spider configuration that provides system reliability and mechanical control. The cone suspension is a high excursion rubber based design that is ideal for deep bass applications in band pass enclosures and extended bass vented designs. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SD15-1700N data sheet

VİEW SD15-1700N data sheet

ÖZELLİKLER :

The SD15-1700N is a high output wide bandwidth transducer. The 15 inch(381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level low frequency and full range response. This design is optimized for both live sound and recorded music venues. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD15-1700N has been optimized for use in two and three way sound reinforcement system designs. The operating bandwidth is 55Hz to 2000Hz. The SD15-1700N employs a large 4.5 inch (114.3mm) diameter voice coil that provides an AES rated 1700 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. The SD15-1700N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement for both low frequency and mid band response. The double spider design insures very high displacement and linear response while maintaining excellent control. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SD15-1700EL data sheet

VİEW SD15-1700EL data sheet

ÖZELLİKLER :

The SD15-1700EL is a high output wide bandwidth transducer. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level low frequency response in two and three way systems. This design is an excellent component for both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SD15-1700EL has been optimized for use in two and three way sound reinforcement system designs. The operating bandwidth is 55Hz to 2000Hz. The SD15-1700EL employs a very large 4.5 inch (114.3mm) diameter voice coil that provides an AES rated 1700 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. The SD15-1700EL utilizes P Audios Auto Balanced-Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audios square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response and high level output in multi-way system designs. The double spider design insures very high displacement and linear response while maintaining excellent control The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SD12R76 data sheet

VİEW SD12R76 data sheet

ÖZELLİKLER :

The P Audio SD12R76 is a high output wide bandwidth transducer. The SD12R76 is a highly upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameterpiston will produce extremely high sound pressure levels at both low and - mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 55Hz to 2000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SD12R76 has been optimized for use in two way or three way sound reinforcement systems. The SD12R76 employs a 3 inch (76.2mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The SD12R76 utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology in an inside/outside geometry to insure very high conversion efficiency.The P Audio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The SD12R76 also features a single spider configuration that provides system reliability and mechanical control. The cone suspension is a high excursion rubber based design that is ideal for deep bass applications in band pass enclosures and extended bass vented designs. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SD12R100 data sheet

VİEW SD12R100 data sheet

ÖZELLİKLER :

The P Audio SD12R100 is a high output wide bandwidth transducer. The SD12R100 is a highly upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) dia-meter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 55Hz to 2000Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD12R100 has been optimized for use in two way or three way sound reinforcement systems. The SD12R100 employs a large format 4 inch (101.6mm) diameter voicecoil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The SD12R100 utilizes P Audios Auto Balanced-Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology in an inside/outside geometry to insure very high conversion efficiency.The PAudio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The SD12R100 also features a single spider configuration that provides system reliability and mechanical control. The cone suspension is a high excursion rubber based design that is ideal for deep bass applications in band pass enclosures and extended bass vented designs. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
 
SD12-1000EL data sheet

SD12-1000EL data sheet

ÖZELLİKLER :

The SD12-1000EL is a high output wide bandwidth transducer designed for low frequency response in two way designs and for high output mid bass. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies. This design is optimized for both live sound and recorded music venues. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD12-1000EL has been optimized for use in two and three way sound reinforcement system designs and may be used in either mid bass or low frequency applications. The operating bandwidth is 60Hz to 3000Hz. The SD12-1000EL employs a large 4 inch (101.6mm) diameter voice coil that provides an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The SD12-1000EL utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement for both low frequency and mid band response. The double spider design insures very high displacement and linear response while maintaining excellent control. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW P-18N data sheet

VİEW P-18N data sheet

ÖZELLİKLER :

The P Audio P-18N is a high output low frequency transducer designed with a vintage voicing. The P-18N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch (457mm)diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating range is 30Hz to 200Hz. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The P-18N employs a large 4 inch (101.6mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P-18N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW P180/2242 data sheet

VİEW P180/2242 data sheet

ÖZELLİKLER :

The P Audio P180/2242 is a high output low frequency transducer designed with a vintage voicing. The P180/2242 is an upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The P180/2242 employs a large 4 inch(101.6mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P180/2242 utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW P180/2241 data sheet

VİEW P180/2241 data sheet

ÖZELLİKLER :

The P Audio P180-2241 is a high output low frequency transducer designed with a vintage voicing. The P180-2241 is an upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch(457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The P180-2241 employs a large 4 inch(99.3mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P180-2241 utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision wound rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The system suspension has been designed to extend linear displacement and maintain excellent mechanical control. The double spider design further enhances system mechanical control and reliability. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW P-15N data sheet

VİEW P-15N data sheet

ÖZELLİKLER :

The P Audio P-15N is a high output low frequency to mid range transducer designed with a vintage voicing. The P-15N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at from low frequencies thru the upper mid range and is ideal for high level two way and three way sound reinforcement systems. The P-15N is well suited for both live sound and recorded music venues. The operating range is 55Hz to 2000Hz. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output. The P-15N employs a large 4 inch (101.6mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P-15N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW P150/2226 data sheet

VİEW P150/2226 data sheet

ÖZELLİKLER :

The P Audio P150-2226 is a high output low frequency to mid range transducer designed with a vintage voicing. The P150-2226 is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at from low frequencies thru the upper mid range and is ideal for high level two way and three way sound reinforcement systems. The P150-2226 is well suited for both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output. The P150-2226 employs a large 4 inch (101.6mm) diameter voice coil and. has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P150-2226 utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is bobbin wound geometry with P Audios rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW X-15A data sheet

VİEW X-15A data sheet

ÖZELLİKLER :


The P Audio X-Class series of portable and fixed install loudspeaker systems represent a unique combination of high performance and portability. The X-15A is a powered two way sound reinforcement system designed for both live music and full range fixed installations. The X-15A contains a bi-amplified power amplifier system featuring a full 300 watts of program power. The X-15A utilizes a 15 inch low frequency loudspeaker and an advanced flare high frequency horn. The rated coverage pattern of 90 degrees in the horizontal plane and 40 degrees in the vertical plane make the system ideal for wide coverage applications such as live performance reinforcement, mobile DJ systems, dance clubs and conference reinforcement systems. The advanced flare horn is mated with a medium format professional compression driver that features high energy neodymium magnetics. The compression driver also features a commercially pure titanium diaphragm and edge wound aluminum voice coil to minimize moving mass and generate extended bandwidth. The P Audio X-15A was designed using a fully discrete Bi-Polar split rail high efficiency amplifier design and active filter system. The amplifier section produces a full 200 watts of low frequency program power and 100 watts of high frequency program power. The input section of the amplifier module features both line level and microphone level inputs and separate volume controls for each input, allowing mixing functions for the two inputs. The X-15A offers world class efficiency for high sound pressure level applications. The one watt, measured at one meter, output is 98dB, making the X-15A a true world class sound reinforcement system. Maximum output capability is over 120dB SPL. The system offers a rated bandwidth of 50Hz to beyond 20kHz. The X-15A features a high impact injection molded enclosure with an integral 35mm stand mount adaptor and four recessed M10 mounting point for permanent installation applications. The system is a light weight design (42.9lbs, 19.5kg) and integral handles for easy transportation. The powder coated metal grill and high impact polycarbonate enclosure insures the X-15A can provide high output acoustic response, even in harsh physical environments. The X-15A offers very linear frequency response and excellent fidelity for a wide range of professional applications.
 
VİEW IMF-HP18W data sheet

VİEW IMF-HP18W data sheet

ÖZELLİKLER :

The P Audio IMF-HP18W NEW is a high output low frequency transducer. The IMF-HP18W NEW is an upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the IMF-HP18W NEW is 30Hz to 200Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The IMF-HP18W NEW employs a medium format 3 inch (76.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The IMF-HP18W NEW utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW SD18-1700N data sheet

VİEW SD18-1700N data sheet

ÖZELLİKLER :

The SD18-1700N is an very high output low frequency transducer. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating range is 30Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD18-1700N employs a large 4.5 inch(114.3mm) diameter voice coil that provides an AES rated 1700 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure and suitable active high pass filtering be employed if extremely high power levels are expected at low frequencies. The SD18-1700N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audios square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity
 
VİEW IMF-HP15W data sheet

VİEW IMF-HP15W data sheet

ÖZELLİKLER :

The P Audio IMF-HP15W NEW is a high output low frequency transducer. The IMF-HP15W NEW is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at low and mid band frequencies and is ideal as a high level low frequency transducer in two way and three way sound reinforcement systems. The transducer is an excellent choice in both live sound and recorded music venues. The operating bandwidth of the IMF-HP15W NEW is 45Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The IMF-HP15W NEW employs a medium format 2.38 inch (60.5mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available. The IMF-HP15W NEW utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW IMF-18W data sheet

VİEW IMF-18W data sheet

ÖZELLİKLER :

The IMF Series II features a wide range of transducers, each designed for specific applications. The IMF-18W is a high performance sub woofer designed for use in dance club systems, mobile DJ systems and portable sound reinforcement sub designs. The IMF-18W is an 18 inch (460mm) diameter loudspeaker that features a rigid stamped steel chassis coupled to a large format Ferrite based permanent magnetic system. The IMF-18W was designed to produce high impact sub bass response. The 3 inch diameter (76.2mm) voice coil design features high conductivity copper and very high thermal capacity adhesive systems to insure both high power handling and high reliability. The IMF-18W features an optimized voice coil geometry designed to support the high excursion requirements of modern high impact sub woofers. Computer based modeling and analysis techniques have optimized the rated bandwidth of 30Hz to 125Hz. This rated bandwidth makes the IMF-18W ideal for reproducing the high impact acoustic response found in modern sound reinforcement systems.
 
VİEW IMF-15LF data sheet

VİEW IMF-15LF data sheet

ÖZELLİKLER :

The IMF Series II offers a 15 inch (389mm) diameter transducer designed for use in two way portable sound reinforcement systems. The IMF-15LF is a Ferrite based permanent magnetic system design that features a 3 inch (76.2mm) voice coil diameter that provides both very high power handling and very high reliability. The rigid stamped steel chassis provides secure mounting and a high degree of mechanical support for the loudspeaker. The IMF-15LF is designed with an operating bandwidth of 50Hz to1500Hz and has been optimized for use within this rated frequency range. This makes the device ideal for use as a woofer in modern two way systems where the high frequency response is provided by a professional level high acoustic output compression driver and horn combination. The IMF -15LF uses a newly developed cone material that provides improved mid range response in both the frequency domain and the time domain. This new material offers more vocal range clarity and intelligibility. All IMF Series II loudspeakers are fully optimized designs that benefit from state of the art analysis and design tools. The reliability and consistency of the IMF-15LF is a direct result of P Audios precise manufacturing methods and quality systems.
 
VİEW IMF-12MB data sheet

VİEW IMF-12MB data sheet

ÖZELLİKLER :

The IMF Series II 12MB is a 12 inch (312mm) diameter loudspeaker optimized for use in high performance two way sound reinforcement systems. The IMF-12MB features a Ferrite based permanent magnetic system. The magnetic design was developed using P Audio’s finite element analysis software and fully tested using advanced computer based measurement and analysis systems. The IMF-12MB has been designed to provide very high sound pressure level performance in the 60Hz to 2000Hz range and is ideally suited for integration into modern two way 12 inch system designs. The transducer is well suited for applications where the high frequency response is provided by a professional level compression driver and horn combination. The IMF-12MB utilizes a 3 inch (76.2mm) diameter voice coil design. The voice coil conductor is high conductivity copper and winding dimensions have been designed to compliment the linear excursion parameters necessary for high level operation in the rated bandwidth. The cone design features a newly developed material that improves mid band vocal response and clarity by increasing the internal mechanical damping of the vibrating system. System power handling is very high and provides excellent field reliability, particularly with the typical high level inputs found in modern sound reinforcement and public address systems.
 
VİEW IMF-12LF data sheet

VİEW IMF-12LF data sheet

ÖZELLİKLER :

The IMF Series II 12LF is a 12 inch (312mm) diameter loudspeaker optimized for use in high performance two way sound reinforcement systems. The IMF-12LF features a Ferrite based permanent magnetic system. The magnetic design was developed using P Audio’s finite element analysis software and fully tested using advanced computer based measurement and analysis systems. The IMF-12LF has been designed to provide very high sound pressure level performance in the 60Hz to 2000Hz range and is ideally suited for integration into modern two way 12 inch system designs. The transducer is well suited for applications where the high frequency response is provided by a professional level compression driver and horn combination. The IMF-12LF utilizes a 3 inch (76.2mm) diameter voice coil design. The voice coil conductor is high conductivity copper and winding dimensions have been designed to compliment the linear excursion parameters necessary for high level operation in the rated bandwidth. The cone design features a newly developed material that improves mid band vocal response and clarity by increasing the internal mechanical damping of the vibrating system. System power handling is very high and provides excellent field reliability, particularly with the typical high level inputs found in modern sound reinforcement and public address systems.
 
VİEW E8-200N data sheet

VİEW E8-200N data sheet

ÖZELLİKLER :

The P Audio E8-200N is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The E8-200N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 8 inch (203mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The E8-200N has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 3000Hz. The E8-200N features a 2 inch (50.8mm) diameter voice coil that provides an AES rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E8-150S data sheet

VİEW E8-150S data sheet

ÖZELLİKLER :

The P Audio E8-150S is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The E8-150S is an upgraded design that features many of P Audios new technologies and performance upgrades. The 8 inch (203mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy ferrite magnetics to achieve a high acoustic output to weight ratio. The E8-150S has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 3000Hz. The E8-150S features a 2 inch (50.8mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The voice coil design is a bobbin wound geometry with P Audios edge wound rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E-18LF data sheet

VİEW E-18LF data sheet

ÖZELLİKLER :

The P Audio E Series II represents a new dimension in loudspeaker performance and value. The dream of high acoustic output and high performance can be realized through innovative engineering and manufacturing methods. The E-18LF is an 18 inch (460mm) diameter low frequency sub woofer that features very high power handling and reliability. The E-18LF uses a rigid stamped steel chassis mated to a large format Ferrite based permanent magnetic system. The operating bandwidth of 40Hz to 125Hz makes this loudspeaker ideal for portable sound reinforcement and installed public address systems where high impact bass and sub bass are specified. The large format 4 inch (101.6mm) diameter voice coil design provides both high power handling and high reliability for high input program material. The high conductivity copper wire is coupled to the narrow magnetic gap magnet structure to provide optimized performance parameters that combine both excellent bandwidth and excellent efficiency. The E-18LF is designed for applications such as mobile DJ, dance club, medium format touring systems and general purpose sub woofers. If extended sub bass is specified P Audio also offers the E-18ELF with a rated bandwidth of 30Hz to 100Hz. Because efficiency bandwidth products require a relationship between efficiency and low frequency response the E-18LF offers superior 1 watt at 1 meter sensitivity as compared to the E-18ELF.
 
VİEW E-18ELF data sheet

VİEW E-18ELF data sheet

ÖZELLİKLER :

The E-18ELF is an extended low frequency loudspeaker designed for ultra low frequency applications. The rated bandwidth is 30Hz to 100Hz. The E Series II E-18ELF is an 18 inch (460mm) diameter transducer that features a large format 4 inch (101.6mm) voice coil design to insure very high power handling and high reliability. The E-18ELF is similar to the E Series II E-18LF but has been optimized to additional extended low frequency response. The relationship between loudspeaker efficiency and low frequency response means that the E-18ELF has a lower 1 watt @ 1 meter sensitivity, as compared to the E-18LF, but does offer extended deep bass response. The E-18ELF should be used whenever very low, extended bass response is required for special effects or when program material contains sufficient content in the extended sub bass range. When high impact tour quality bass is required the E-18LF should be used. The E-18ELF features a rigid stamped steel chassis coupled to a large diameter Ferrite permanent magnetic structure. The large format voice coil features a high conductivity copper voice coil with substantial thermal capacity. Ultra high temperature adhesive systems are employed to insure maximum reliability. The E-18ELF has been optimized through the use of computer based measurement and modeling. The extended voice coil length provides increased linear excursion at high input power levels.
 
VİEW E15-200S data sheet

VİEW E15-200S data sheet

ÖZELLİKLER :

The P Audio E15-200S NEW is a high output low frequency transducer. The E15-200S NEW is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E15-200S NEW is 40Hz to 2000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E15-200S NEW employs a medium format 2.5 inch (63.7mm) diameter voice coil that provides an AES rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The E15-200S NEW utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity
 
VİEW E18-600S data sheet

VİEW E18-600S data sheet

ÖZELLİKLER :

The P Audio E18-600S is a very high output low frequency transducer. The E18-600S is an upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E18-600S is 35Hz to200Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E18-600S employs a large format 4 inch (101.6mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The large voice coil diameter and very high power handling make this transducer and excellent choice for ultra high performance professional sound reinforcement systems. The E18-600S utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E-15LF data sheet

VİEW E-15LF data sheet

 
VİEW P-12N data sheet

VİEW P-12N data sheet

ÖZELLİKLER :

The P Audio P-12N is a high output low frequency to mid range transducer designed with a vintage voicing. The P-12N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at from low frequencies thru the upper mid range and is ideal for high level two way and three way sound reinforcement systems. The P-12N is well suited for both live sound and recorded music venues. The operating range is 60Hz to 3000Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output. The P-12N employs a large 4 inch (101.6mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P-12N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
 VİEW SN12-350B data sheet

VİEW SN12-350B data sheet

ÖZELLİKLER :

The P Audio SN12-350B is a high performance wide bandwidth transducer. The SN12-350B is an upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN12-350B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 3000Hz. The SN12-350B features a large 3 inc(76.2mm) diameter voice coil that provides an AES rated 350 watts of continuous power handling and a full 1400 watts of peak rated power handling when sufficient amplifier headroom is available. The SN12-350B utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios inside/outside wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
 VİEW SN6-200F data sheet

VİEW SN6-200F data sheet

ÖZELLİKLER :

The P Audio SN6-200F is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-200F is an upgraded design that features many of P Audios new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SN6-200F has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 65Hz to 5000Hz. The SN6-200F features a 2 inch (51.5mm)diameter voice coil that provides an AES rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-200F utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios copper wire inside/outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The SN6-200F utilizes a very high technology carbon fiber composite cone design to insure very high rigidity and extended piston range performance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SN6-150MB data sheet

VİEW SN6-150MB data sheet

ÖZELLİKLER :

The P Audio SN6-150MB is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-150MB is an upgraded design that features many of P Audios new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN6-150MB has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN6-150MB features a 1.75 inch (44.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-150MB utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The cone suspension is a high internal damping rubber design. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SN6-150CX data sheet

VİEW SN6-150CX data sheet

ÖZELLİKLER :

The P Audio SN6-150CX is a high performance coaxial transducer. The SN6-150CX is an upgraded design that features many of P Audios new technologies and performance upgrades. The low frequency section utilizes a large diameter voice coil design while the high frequency section employs a medium format titanium diaphragm assembly. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SN6-150CX has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 20000Hz. The SN6-150CX features a 1.75 inch (44.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-150CX employs P Audios under damper venting to control turbulent air flow. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The high frequency section is a close spaced titanium diaphragm assembly. The diaphragm is a 1.34 inch (34mm) diaphragm that provides excellent high frequency response and superior power handling and durability. The horn loading is a thru pole piece design The overall high frequency design provides very high sensitivity. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SN6-100N data sheet

VİEW SN6-100N data sheet

ÖZELLİKLER :

The P Audio SN6-100N is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-100N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN6-100N has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN6-100N features a 1.2 inch (30.5mm) diameter voice coil that provides an AES rated 100 watts of continuous power handling and a full 400 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-100N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision round wire inside/outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The SN6-100N utilizes a very high technology carbon fiber composite cone design to insure very high rigidity and extended piston range performance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SN3-30N data sheet

VİEW SN3-30N data sheet

ÖZELLİKLER :

The SN3-30N is an ultra small format wide bandwidth transducer. The 3 inch (76mm) diameter piston will produce excellent background music and speech reproduction. The small physical dimensions of the SN3-30N allow the transducer to be used in very small enclosures. The device may also be used in multiple array configurations and the center to center dimensions when the units are close spaced allows for lobe free reproduction thru the critical vocal range. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN3-30N employs a large 0.8 inch (20.3mm) diameter voice coil that provides an AES rated 30 watts of continuous power handling and a full 120 watts of peak rated power handling when sufficient amplifier headroom is available. The SN3-30N utilizes P Audios under damper venting technology to reduce turbulent airflow near the voice coil. The voice coil design is P Audios precision round wire technology that provides good conversion efficiency and high thermal power handling. The cone design is Kevlar fiber composite that insures wide band piston range response and stability. The cone surround is a half roll rubber geometry. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity and light weight.
 
VİEW SN-18LF data sheet

VİEW SN-18LF data sheet

ÖZELLİKLER :

The SN Series II transducers represent a unique combination of extremely high performance and high value. The SN-18LF utilizes a medium format 3 inch (76.2mm) diameter voice coil coupled to a computer optimized Neodymium based permanent magnet system. This voice coil and magnet structure combination insures very high conversion efficiency and an excellent performance to value ratio. The SN-18LF is an 18 inch (460mm) diameter low frequency design that has a rated bandwidth of 40Hz to 125Hz. This bandwidth provides an optimum combination of low frequency response and efficiency. It is common in professional touring and fixed installation systems to filter low frequency material below 35Hz to limit sub sonic material. The SN-18LF takes advantage of this technique and has been designed to offer maximum impact low frequency output in its rated bandwidth. The SN-18LF features an aluminum rectangular geometry voice coil and very high thermal capacity to insure high power handling and high reliability. The combination of a light weight but very high energy product Neodymium magnet structure and a die cast aluminum chassis produce a very light weight design. The SN-18LF is well suited for medium format touring systems and excellent for fixed installation designs, particularly when the systems must be suspended. The light weight design makes the SN-18LF ideal for portable systems as well as for flown/suspended systems. The SN-18LF is an excellent choice for bass and sub woofer designs
 
VİEW SN-18ELF data sheet

VİEW SN-18ELF data sheet

ÖZELLİKLER :

The SN 18ELF is an extended low frequency transducer intended for applications where ultra low frequency response is specified. The 18 inch (460mm) diameter chassis provides a large cross sectional area capable of very large acoustic volume velocities. The mechanical suspension system has been optimized for large linear excursion and is well suited for the rated bandwidth of 30Hz to 100Hz. All performance parameters have been fully analyzed and optimized using state of the art computer based analysis methods. The SN-18ELF features a medium format 3 inch (76.2mm) diameter voice coil. This voice coil design utilizes rectangular aluminum wire in an edge wound configuration found in all professional high performance designs. The die cast aluminum chassis and light weight but very high energy product Neodymium magnetic system combine to produce an extremely light weight design. The extended low frequency performance of the SN-18ELF make it an ideal choice when applications such as special low frequency effects are specified. The SN-18ELF is well suited for dance floor, mobile DJ and general purpose portable public address system designs. The advanced manufacturing systems employed at P Audio insure consistent and very reliable long term performance.
 
VİEW SN-15LF data sheet

VİEW SN-15LF data sheet

ÖZELLİKLER :

The P Audio SN Series II features a wide variety of very high performance to value ratio Neodymium based transducers. The SN-15LF is an excellent example of P Audio’s high performance design philosophy. This transducer features a 15 inch (389mm) diameter chassis coupled to a very high energy product Neodymium based permanent magnetic structure. The combination of this high energy product magnetic structure and a die cast aluminum chassis make the SN-15LF a very high output device that also features very low weight. The operating bandwidth of 55Hz to 1500Hz make the SN-15LF and ideal choice for the bass and vocal fundamental range response of a professional two way system design. The cone material has been optimized for high internal damping and superior time domain performance in the vocal fundamental range. The performance parameters of the SN-15LF have been optimized for use in two way systems such as general purpose sound reinforcement systems where the high frequency response is provided by a high efficiency compression driver and horn. High power handling is achieved through the use of advanced thermal capacity voice coil adhesives and very high temperature rectangular aluminum edge wound voice coils. When high performance and portability are specified, the SN-15LF is an ideal choice for the bass section of a world class two way design.
 
VİEW SN15-500CX data sheet

VİEW SN15-500CX data sheet

ÖZELLİKLER :

The P Audio SN15-500CX is a high performance coaxial transducer. The SN15-500CX is an upgraded design that features many of P Audios new technologies and performance upgrades. The low frequency section utilizes a large diameter voice coil design while the high frequency section employs a medium format titanium diaphragm assembly. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN15-500CX has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 20000Hz. The SN15-500CX features a large 3.28 inch (83.3mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The SN15-500CX employs P Audios under damper venting to control turbulent air flow. The voice coil design is a bobbin wound geometry with P Audios precision round inside/ outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The high frequency section is a close spaced titanium diaphragm assembly. The diaphragm is a 2.5 inch (63.5mm) diaphragm that provides excellent high frequency response and superior power handling and durability. The horn loading is provided via a thru pole piece configuration The overall high frequency design provides very high sensitivity. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SN15-500B data sheet

VİEW SN15-500B data sheet

ÖZELLİKLER :

The P Audio SN15-500B is a high performance wide bandwidth transducer. The SN15-500B is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN15-500B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 2000Hz. The SN15-500B features a large 3.28 inch(83.3mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The SN15-500B utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with PAudios precision round inside/outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high de
 
VİEW SN-12MB data sheet

VİEW SN-12MB data sheet

ÖZELLİKLER :

The SN-12MB has been designed specifically for both direct radiator and horn loaded mid bass applications. This SN Series II design has been optimized for use in the critical 60Hz to 2000Hz vocal range and is an ideal choice for professional level three way designs. A typical 12 inch design must offer both good bandwidth, down to 60Hz, and good efficiency. The SN-12MB has all of its performance designed into the 125Hz and above range. This means that the efficiency can be optimized for this frequency range. High efficiency means that lower electrical power levels are required, thus improving both system reliability and reducing power compression. The SN 12MB is a 12 inch (314mm) diameter design that employs very high energy product Neodymium magnetics to proved extremely high conversion efficiency. The medium format 3 inch (76.2mm) voice coil design is an edge wound rectangular aluminum design to further maximize efficiency. Because weight is critical for portable systems or flown/suspended designs, the SN-12MB features a die cast aluminum chassis as well as the light weight Neodymium magnet structure. The performance parameters of the SN-12MB are optimized for professional level mid bass designs. If full range designs are specified the SN-12LF should be utilized. P Audio features state of the art design and manufacturing that insure the SN-12MB will provide very high power handling and reliability in high performance profession applications.
 
 VİEW SN-12LF data sheet

VİEW SN-12LF data sheet

ÖZELLİKLER :

The SN Series II from P Audio offers unique opportunities for system design. This is clearly demonstrated in the SN-12LF design. The SN- 12LF is a very light weight but very high performance 12 inch (314mm) diameter design that is ideally suited for use in the very popular 12 inch two way portable loudspeaker systems. Portable systems require professional levels of performance but must be light weight enough for convenient transportation. The SN-12LF offers very high acoustic performance. This level of high performance is provided by a high energy product Neodymium based permanent magnetic systems that offers world class efficiency. Because Neodymium is also very light weight the SN-12LF can produce excellent output while maintaining a very low weight. The light weight magnetic structure is mounted to a light weight die cast aluminum chassis. World class efficiency and weight also require world class reliability. The SN- 12LF features a high thermal capacity 3 inch (76.2mm) diameter voice coil design that employs rectangular geometry edge wound aluminum conductors. With a rated bandwidth of 60Hz to 2000Hz the SN-12LF is perfect for two way portable system designs. P Audio engineers also developed a new cone material that provides substantial internal damping. This new material provides very high quality vocal range clarity and intelligibility. The SN-12LF produces excellent response in both the vocal fundamental range as well as in the upper vocal range. When used in a two way design with a high quality compression driver and high frequency horn, the overall systems response can produce superb vocal reproduction.
 
VİEW SD15R83 data sheet

VİEW SD15R83 data sheet

ÖZELLİKLER :

The P Audio SD15R83 is a high output wide bandwidth transducer. The SD15R83 is a highly upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 40Hz to 2000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SD15R83 has been optimized for use in two way or three way sound reinforcement systems. The SD15R83 employs a large format 3.28 inch (83.5mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The SD15R83 utilizes P Audios Auto Balanced- Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision circular wire technology in an inside/outside geometry to insure very high conversion efficiency.The P Audio circular wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The SD15R83 also features a single spider configuration that provides system reliability and mechanical control. The cone suspension is a high excursion rubber based design that is ideal for deep bass applications in band pass enclosures and extended bass vented designs. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
 VİEW SN12-500B data sheet

VİEW SN12-500B data sheet

ÖZELLİKLER :

The P Audio SN12-500B is a high performance wide bandwidth transducer.The SN12-500B is an upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN12-500B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 3000Hz. The SN12-500B features a large 3.28 inch (83.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The SN12-500B utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios inside/outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SD18-1700EL data sheet

VİEW SD18-1700EL data sheet

ÖZELLİKLER :

The SD18-1700EL is a high output low frequency transducer. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating range is 30Hz to 200Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SD18-1700EL employs a very large 4.5 inch (114.3mm) diameter voice coil that provides an AES rated 1700 watts of continuous power handling and a full 6800 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure and that active high order high pass filtering be employed if extremely high power levels are expected at low frequencies. The SD18-1700EL utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audios square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SN-10MB data sheet

VİEW SN-10MB data sheet

ÖZELLİKLER :

When very compact and light weight loudspeaker systems are required the SN-10MB is an ideal design. Like all SN Series II designs, the SN- 10MB was designed for a specific application. This 10 inch (264mm) diameter loudspeaker is ideal for applications where a very portable system or small enclosure size is specified. The 10 inch diameter design offers increased radiating area over a traditional 8 inch (203mm) woofer and can out perform 8 inch woofers in terms of acoustic output. Like all loudspeakers in the SN Series II family, the SN-10MB features a Neodymium based permanent magnetic system mounted to a die cast aluminum chassis. This 10 inch design features a 3 inch diameter (76.2mm) voice coil design. This represents a large coil diameter to chassis diameter and will insure very high power handling and reliability in this small but very powerful design. The operating bandwidth is 65Hz to 2500Hz.This response range is optimized for two way system designs for both small format sound reinforcement and installed public address designs. The SN-10MB is also an ideal for high performance direct radiator and horn loaded mid bass designs. When used from 150Hz to 2000Hz, this design can provide superb mid band and vocal band performance levels. The new cone material provides a very high degree of vocal clarity and intelligibility.
 
VİEW SN10-300MBF data sheet

VİEW SN10-300MBF data sheet

ÖZELLİKLER :

The P Audio SN10-300MBF is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN10-300MBF is an upgraded design that features many of P Audios new technologies and performance upgrades. The 10 inch (254mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite based magnetics to achieve a very high acoustic output to weight ratio. The SN10-300MBF has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 50Hz to 5000Hz. The SN10-300MBF features a large 2.5 inch(63.7mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available. The SN10-300MBF utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios edge wound rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SN10-300MB data sheet

VİEW SN10-300MB data sheet

ÖZELLİKLER :

The P Audio SN10-300MB is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN10-300MB is an upgraded design that features many of P Audios new technologies and performance upgrades. The 10 inch (254mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN10-300MB has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 3000Hz. The SN10-300MB features a large 2.5 inch (63.7mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available. The SN10-300MB utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios edge wound rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW FL-18LF data sheet

VİEW FL-18LF data sheet

ÖZELLİKLER :

The FL-18LF is an 18 inch diameter (476mm) low frequency transducer designed for very high acoustic output between 40Hz and 120Hz. Like all Flagship series products the FL-18LF features a very high energy product Neodymium based permanent magnet mounted to a rigid but light weight die cast aluminum alloy chassis. This combination makes the FL-18LF ideal for touring sound and portable low frequency public address systems. The light weight also makes this design excellent for flown and permanently suspended designs where load weight must be minimized. The FL-18LF utilizes a large diameter 4 inch (101.6mm) voice coil design that will provide high reliability and reduced power compression. This large voice coil produces very high reliability and power handling and utilizes rectangular conductors in an edge wound configuration. The FL-18LF is ideally suited for sub woofer applications where both low frequency response and efficiency are critical performance parameters. This design is an excellent combination of efficiency and low frequency bandwidth. Ideal applications include touring sub woofers, high impact portable sound subs, and permanently installed flown low frequency enclosures. Computer based parameter optimization techniques have produced a very flexible and light weight but powerful deep bass transducer.
 
VİEW FL-18ELF data sheet

VİEW FL-18ELF data sheet

ÖZELLİKLER :

The P Audio FL-18ELF is an 18 inch diameter (476mm) extended low frequency sub driver. This design allows for extended ultra low frequency operation to 30Hz and is ideal for deep bass applications such as high output dance floor designs. The die cast aluminum chassis and high energy Neodymium magnet system also make the FL-18ELF very suited for portable sub woofer applications. The rated operating bandwidth is 30HZ to 100Hz. The FL-18ELF has a large format 4 inch (101.6mm) voice coil assembly with an extended voice coil design to produce increased maximum linear excursion capability. The edge wound rectangular wire and high temperature adhesive systems produce very high efficiency. The extended low frequency range of the FL-18ELF requires very high linear excursion for clean deep bass reproduction. The large diameter voice coil insures very high power handling and high reliability in critical deep bass applications where substantial input power is required space. Like all P Audio products, advanced finite element analysis and parameter optimization make this design ideally suited for ultra low frequency applications.
 
VİEW FL-15LF data sheet

VİEW FL-15LF data sheet

ÖZELLİKLER :

The FL-15LF from P Audio is a very high output high performance low frequency driver that also exhibits wide bandwidth. The extended bandwidth make the FL-15LF ideal for the bass and lower mid range sections of any two way design. A newly developed cone material produces clean vocal fundamentals and well controlled time domain performance. The FL-15LF also features a large format 4 inch (101.6mm) voice coil assembly that insures very high power handling and high reliability. This voice coil design features edge wound rectangular geometry conductors. The high energy product Neodymium magnet system and light weight die cast aluminum frame allow this design to be used in high performance touring system designs where maximum acoustic and minimized weight are both critical performance parameters. The rated operating bandwidth is 45Hz to 2000Hz. The FL-15LF is an excellent choice for two way and three way designs such as touring systems, portable public address systems and particularly suited for permanent installation systems that are suspended. The light weight and maximized efficiency-bandwidth product make this woofer and ideal bass and lower vocal full range component in two way and three way designs where light weight and portability are critical.
 
VİEW FL-12MB data sheet

VİEW FL-12MB data sheet

ÖZELLİKLER :

The Flagship Series FL-12MB has been designed for very high output and low distortion response in both direct radiator and horn loaded mid bass system designs. The Neodymium Iron Boron permanent magnetic material provides very high mid band output efficiency and the short voice coil design insures very high acoustical conversion efficiency. Because a large percentage of total system power is located in the critical mid band frequency range, the FL-12MB utilizes an edge wound rectangular wire large format voice coil design. This design is a full 4 inch diameter (101.6mm) assembly that has been designed to provide extended reliability and controlled time domain response in the vocal range. When utilized in a 3 way system, where the FL-12MB is the mid bass component, the overall systems will produce a very clean and controlled mid bass response. The FL-12MB uses the same cone material as the FL-12LF to provide high internal damping and controlled mid band response. The suggested frequency range for this driver is 60Hz to 2000Hz. The FL-12MB may be used in any professional touring, portable public address system or permanent installation where high output and low weight are both critical performance parameters.
 
VİEW FL-12LF data sheet

VİEW FL-12LF data sheet

ÖZELLİKLER :

The P Audio Flagship series offers a very high output and high reliability 12 inch diameter (315mm) loudspeaker. This design has been optimized for vocal clarity as well as full range response. The FL-12LF has been designed for use in two way systems and is also ideally suited for monitors as well. The new cone material features very high internal damping and produces very clean vocal fundamentals. The time domain response throughout the critical vocal range is excellent. The recommended frequency range for the FL-12LF is 60Hz to 2000Hz. The FL-12LF also utilizes a large format 4 inch diameter (101.6mm) voice coil and edge wound rectangular wire for high efficiency and high reliability. This woofer is an ideal choice for 12 inch two way general purpose public address systems as well as for high output professional monitors. This voice coil design and the new Flagship Series suspension system have been optimized for a high linear excursion and wide bandwidth responses. The light weight but high output Neodymium and aluminum chassis also mean the FL-12LF is well suited for permanently installed suspended designs.
 
VİEW SD21-2000N data sheet

VİEW SD21-2000N data sheet

ÖZELLİKLER :

The SD21-2000N is an ultra high output low frequency transducer. The 21 inch (533mm) diameter piston will produce extremely high sound pressure evels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The combination of a large radiating area and high linear displacement will generate substantial acoustic power. The operating range is 30Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD21-2000N employs an extremely large 6 inch (152mm) diameter voice coil that provides an AES rated 2000 watts of continuous power handling and a full 8000 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure. The SD21-2000N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audios square wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. For additional mechanical power handling it is recommended that a high order high pass filter be used and tuned immediately below the enclosure tuning frequency. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity
 
VİEW SD21-1800N data sheet

VİEW SD21-1800N data sheet

ÖZELLİKLER :

The SD21-1800N is an ultra high output low frequency transducer. The 21 inch (533mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The 21 inch piston area will produce extremely high acoustic output power. The operating range is 30Hz to 200Hz. The transducer uses high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SD21-1800N employs a very large 5 inch (127mm) diameter voice coil that provides an AES rated 1800 watts of continuous power handling and a full 7200 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly tuned vented enclosure for maximum power handling. The SD21-1800N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. A high order (4th) high pass filter is recommended for use with extremely high power low frequency signals. This external active high pass filter should be tuned to just below the enclosure tuning frequency. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
 VİEW SD21-1800ELdata sheet

VİEW SD21-1800ELdata sheet

ÖZELLİKLER :

The SD21-1800EL is a high output low frequency transducer. The 21 inch (533mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The very large radiating area and high linear displacement insure extremely high acoustic power radiation at very low frequencies. The operating range is 30Hz to 200Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The SD21-1800EL employs a very large 5 inch (127mm) diameter voice coil that provides an AES rated 1800 watts of continuous power handling and a full 7200 watts of peak rated power handling when sufficient amplifier headroom is available. It is recommended that the transducer be loaded into a properly designed vented enclosure and that active high pass filtering be employed if extremely high low frequency power input will be used. The SD21-1800EL utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is an inside/outside geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a very large cross-sectional area for superior cooling. System linearity is achieved by employing magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design insures very high displacement and linear response while maintaining excellent control. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW E15-600S data sheet

VİEW E15-600S data sheet

ÖZELLİKLER :

The P Audio E15-600S is a very high output low frequency transducer. The E15-600S is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at low frequencies and is ideal for high level full range response in both live sound and recorded music venues. The E15 600S is an excellent choice as a low frequency component in a professional two way system design. The operating bandwidth of the E15-600S is 40Hz to 2000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E15-600S employs a large format 4 inch (101.6mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The large voice coil diameter and very high power handling make this transducer and excellent choice for ultra high performance professional sound reinforcement systems. The E15-600S utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW SN12-500CX data sheet

VİEW SN12-500CX data sheet

ÖZELLİKLER :

The P Audio SN12-500CX is a high performance coaxial transducer. The SN12-500CX is an upgraded design that features many of P Audios new technologies and performance upgrades. The low frequency section utilizes a large diameter voice coil design while the high frequency section employs a medium format titanium diaphragm assembly. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN12-500CX has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 20000Hz. The SN12-500CX features a large 3.28 inch (83.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The SN12-500CX employs P Audios under damper venting to control turbulent air flow. The voice coil design is a bobbin wound geometry with P Audios precision round inside/outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The high frequency section is a close spaced titanium diaphragm assembly. The diaphragm is a 2.5 inch (63.5mm) diaphragm that provides excellent high frequency response and superior power handling and durability. The horn loading is a thru pole piece design that uses the low frequency cone as part of the final horn flare. The overall high frequency design provides very high sensitivity. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW X-100FWA data sheet

VİEW X-100FWA data sheet

ÖZELLİKLER :

The P Audio X-100FWA is a bi-amplified small format powered loudspeaker system. The basic system is a two way design that features a 6.5 inch (165mm) low frequency driver with a Kevlar based cone. The high frequency section is a neodymium based soft dome tweeter designed for excellent time domain response in the upper vocal range. This high frequency transducer is a 1.25 inch (31.7mm) format that also uses ultra high temperature voice coil technology. The X-100FWA features a high peak (burst) power module capable of delivering over 160 watts of burst power to the system. This additional headroom allows the system to product a very wide range of dynamic signals. The pre amplifier section features both line input as well a line through XLR connectors as well as a 6.3mm microphone level input. The X-100FWA requires 220 volts at 50Hz and is designed for countries where this mains voltage and frequency are standard. The X-100FWA is an injection molded enclosure that utilizes high impact polycarbonate resins to provide a very cosmetic but rugged design. The enclosure may be ordered in either a grey or white color to match installation requirements. The metal grill provides excellent protection for the system transducers. The system may be mounted using a standard “U” bracket and also has a stand plate available. The X-100FWA is a very light weight full range bi amplified system that is ideal for a wide variety of both portable and installed applications.
 
VİEW E15-350N data sheet

VİEW E15-350N data sheet

ÖZELLİKLER :

The P Audio E15-350N is a high output low frequency transducer. The E15-350N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels and wide band response. The transducer is ideal for high level bass and full range response in both live sound and recorded music venues. The E15-350N is an excellent choice for a low frequency component in a two way system design. The operating bandwidth of the E15-350N is 40Hz to 2000Hz. The transducer uses very high energy neodymium based magnetics to achieve a very high acoustic output to weight ratio. The E15-350N employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 350 watts of continuous power handling and a full 1400 watts of peak rated power handling when sufficient amplifier headroom is available. The E15-350N utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW KM-60 data sheet

VİEW KM-60 data sheet

ÖZELLİKLER :

The KM-60 is a highly styled indoor and outdoor wide range sound reinforcement loudspeaker system. The KM-60 is designed for use in a variety of installation environments where a loudspeaker design must integrate into an overall design concept. The KM-60 is a very durable die cast aluminum enclosure. The design features two extended displacement 3 inch (76.2mm) transducers in a vertical array. This design is ideal for vocal range reproduction when longer mid range throw is required from the system. The KM-60 enclosure is available in both black and white colors. Multiple KM-60 enclosures may be mounted in a full 360 degree array for broad horizontal coverage. The system also offers a “U” bracket designed for easy wall or ceiling mounting.
 
VİEW A-50FN data sheet

VİEW A-50FN data sheet

ÖZELLİKLER :

The P Audio A-50FN is a medium format foreground and background music system designed to provide high quality music reproduction in fixed installation environments. The system is a compact two way design that utilizes a wide bandwidth 5.25 inch (133mm) low frequency transducer and horn loaded high frequency radiator. The high frequency driver is a 1 inch (25.4mm) PEI based diaphragm that provides excellent extended bandwidth. The light weight construction of the tweeter and horn loading insure excellent upper vocal response. The A-50FN features a computer optimized crossover designed to provide seamless transition from low frequency to high frequency and also offer high frequency dynamic protection. The A-50FN is ideal for applications such as restaurants, pubs, retail spaces, aerobics and fitness centers and general music and voice reproduction. The small size of the A-50FN also makes this enclosure excellent for house of worship background reinforcement. The system will provide high fidelity response in installed acoustic environments. The A-50FN offers high sensitivity and the 1 watt at 1 meter sound pressure level rating of 90dB insures ample system output even in noisy acoustic spaces. The system enclosure is available in either dark blue black and is molded using a very high quality high impact polycarbonate resin. The metal grill provides excellent protection for the system transducers.
 
VİEW A-100FN data sheet

VİEW A-100FN data sheet

ÖZELLİKLER :

The P Audio A-100FN is a medium format foreground and background music system designed to provide high quality music reproduction in fixed installation environments. The system is a compact two way design that utilizes a wide bandwidth 6.5 inch (165mm) low frequency transducer and horn loaded high frequency radiator. The A-100FN features a computer optimized crossover designed to provide seamless transition from low frequency to high frequency and also offer high frequency dynamic protection. The A-100FN is ideal for applications such as restaurants, pubs, retail spaces, aerobics and fitness centers and general music and voice reproduction. The system will provide high fidelity response in installed acoustic environments. The A-100FN offers high sensitivity and the 1 watt at 1 meter sound pressure level rating of 92dB insures ample system output even in noisy acoustic spaces. The system enclosure is available in either dark blue black and is molded using a very high quality high impact polycarbonate resin. The metal grill provides excellent protection for the system transducers.
 
VİEW COMPACT 4,3 data sheet

VİEW COMPACT 4,3 data sheet

ÖZELLİKLER :

The Compact 4.3 is a high performance small format foreground and background sound reinforcement system designed for permanent installation in a wide variety of acoustic environments. The balanced low frequency response makes the Compact 4.3 ideally suited for retail spaces where high energy music playback is specified, particularly when a sub woofer is added. The system is also excellent for smaller fitness centers and workout rooms where amplified music supports verbal instruction. The Compact 4.3 presents a very cosmetic design and integrates well into upscale restaurant and pub environments where themed music is a part of the overall experience. The P Audio Compact 4.3 features a 4 inch (102mm) woofer with a weather resistant coating that also improves mechanical damping of the cone. The woofer utilizes P Audio’s renowned high temperature voice coil design to insure both very high power handling and high reliability. The small format enclosure integrates well into many acoustic spaces and the advanced woofer design provides balanced low frequency response. The HF section features a horn loaded 1 inch (25.4mm) Mylar based diaphragm. The horn loading increases the on axis sensitivity of the system and improves overall system directivity. The Compact 4.3 enclosure is injection molded and utilizes a very high impact polycarbonate resin. The enclosure is available in both black and white to allow the enclosure to blend into a variety of interior decorating schemes. The system features a switchable input that features both low impedance, direct drive, as well as multi tap positions for constant voltage distributed system designs. The 4 position switch offers 35 watt, 25 watt, and 15 watt taps for constant voltage designs and an 8 ohm direct position for conventional system drive. The enclosure is supplied with a load tested “U” bracket for permanent installation.
 
VİEW COMPACT 5,3 data sheet

VİEW COMPACT 5,3 data sheet

ÖZELLİKLER :

The Compact 5.3 is a high performance medium to small format foreground and background sound reinforcement system designed for permanent installation in a wide variety of acoustic environments. The extended low frequency response makes the Compact 5.3 ideally suited for retail spaces where high energy music playback is specified. The system is also excellent for medium to small fitness centers and workout rooms where amplified music supports verbal instruction. The Compact 5.3 presents a very cosmetic design and integrates well into upscale restaurant and pub environments where themed music is a part of the overall experience. The P Audio Compact 5.3 features a 5.25 inch (133mm) woofer with a weather resistant coating that also improves mechanical damping of the cone. The woofer utilizes P Audio’s renowned high temperature voice coil design to insure both very high power handling and high reliability. The small format enclosure integrates well into many acoustic spaces and the advanced woofer design provides balanced low frequency response. The HF section features a horn loaded 1 inch (25.4mm) Mylar based diaphragm. The horn loading increases the on axis sensitivity of the system and improves overall system directivity. The Compact 5.3 enclosure is injection molded and utilizes a very high impact polycarbonate resin. The enclosure is available in both black and white to allow the enclosure to blend into a variety of interior decorating schemes. The system features a switch able input that features both low impedance, direct drive, as well as multi tap positions for constant voltage distributed system designs. The 4 position switch offers 35 watt, 25 watt, and 15 watt taps for constant voltage designs and an 8 ohm direct position for conventional system drive. The enclosure is supplied with a load tested “U” bracket for permanent installation.
 
VİEW COMPACT 6,3 data sheet

VİEW COMPACT 6,3 data sheet

ÖZELLİKLER :

The Compact 6.3 is a high performance medium format foreground and background sound reinforcement system designed for permanent installation in a wide variety of acoustic environments. The extended low frequency response makes the Compact 6.3 ideally suited for retail spaces where high energy music playback is specified. The system is also excellent for medium sized fitness centers and workout rooms where amplified music supports verbal instruction. The Compact 6.3 presents a very cosmetic design and integrates well into upscale restaurant and pub environments where themed music is a part of the overall experience. The P Audio Compact 6.3 features a 6 inch (152mm) woofer with a weather resistant coating that also improves mechanical damping of the cone. The woofer utilizes P Audio’s renowned high temperature voice coil design to insure both very high power handling and high reliability. Although the enclosure is relatively small, the high performance woofer offers excellent low frequency extension. The HF section features a horn loaded 1 inch (25.4mm) silk diaphragm. The horn loading increases the on axis sensitivity of the system and improves overall system directivity. The Compact 6.3 enclosure is injection molded and utilizes a very high impact polycarbonate resin. The enclosure is available in both black and white to allow the enclosure to blend into a variety of interior decorating schemes. The system features a switch able input that features both low impedance, direct drive, as well as multi tap positions for constant voltage distributed system designs. The 4 position switch offers 35 watt, 25 watt, and 15 watt taps for constant voltage designs and an 8 ohm direct position for conventional system drive. The enclosure is supplied with a load tested “U” bracket for permanent installation.
 
VİEW COMPACT 8,3 data sheet

VİEW COMPACT 8,3 data sheet

ÖZELLİKLER :

The Compact 8.3 is a high performance large format foreground and background sound reinforcement system designed for permanent installation in a wide variety of acoustic environments. The extended low frequency response makes the Compact 8.3 ideally suited for retail spaces where high energy music playback is specified. The system is also excellent for larger fitness centers and workout rooms where amplified music supports verbal instruction. The Compact 8.3 presents a very cosmetic design and integrates well into upscale restaurant and pub environments where themed music is a part of the overall experience. The P Audio Compact 8.3 features an 8 inch (203mm) long throw woofer with a weather resistant coating that also improves mechanical damping of the cone. The woofer utilizes P Audio’s renowned high temperature voice coil design to insure both very high power handling and high reliability. The high frequency response is accurate and extended to beyond 18 kHz. The HF section features a horn loaded 1 inch (25.4mm) silk diaphragm. The horn loading increases the on axis sensitivity of the system and improves overall system directivity. The Compact 8.3 enclosure is injection molded and utilizes a very high impact polycarbonate resin. The enclosure is available in both dark gray and white to allow the enclosure to blend into a variety of interior decorating schemes. The system features a switchable input that features both low impedance, direct drive, as well as multi tap positions for constant voltage distributed system designs. The 4 position switch offers 35 watt, 25 watt, and 15 watt taps for constant voltage designs and an 8 ohm direct position for conventional system drive. The enclosure is supplied with a load tested “U” bracket for permanent installation.
 
VİEW X-3-15P data sheet

VİEW X-3-15P data sheet

ÖZELLİKLER :

The P Audio X3-15P is a light weight high performance sound reinforcement loudspeaker enclosure. The X3-15P is a passive design that incorporates a high order passive filter to ensure accurate amplitude response. The X3-15P is a very flexible design and may be used in a wide variety of professional applications. The X3-15 is a two way design the features a 15" (381mm) low frequency section and a true compression driver coupled 1o a 90 degree by 40 degree waveguide. The high acoustic sensitivity and output capability makes the X3-15 and ideal choice for a variety of professional applications. These applications include portable OJ applications, live sound venues, commercial environments and general public address requirements. The 15 inch woofer is an excellent choice for both intelligibility throughout the vocal range and extended and high impact low frequency reproduction. The system transducers were selected to provide superior fidelity and reliability. The design is characterized by very high power handling and excellent amplitude linearity. The X3-15 is an injection molded design that is light weight and includes an integral1 3/8" (35mm) industry standard "top hat" for use with standard loudspeaker stands. The enclosure design is very rugged and features a heavy gauge steel protective grill. The design is a light weight 16.9kg (37.3 lbs).
 
VİEW X3-12P data sheet

VİEW X3-12P data sheet

ÖZELLİKLER :

The P Audio X3-12P is a light weight high performance sound reinforcement loudspeaker enclosure. The X3-12P is a passive design that incorporates a high order passive filter to ensure accurate amplitude response. The unique geometry of the X3-12P enclosure allows use as either a conventional sound reinforcement enclosure or as a floor monitor. The X3-12P is a very flexible design and may be used in a wide variety of professional applications. The X3-12 is a two way design the features a 12" (305mm) low frequency section and a true compression driver coupled to a 90 degree by 60 degree waveguide. The high acoustic sensitivity and output capability makes the X3-12 and ideal choice for a variety of professional applications. These applications include portable DJ applications, live sound venues, commercial environments and general public address requirements. The 12 inch woofer is an excellent choice for intelligibility throughout the vocal range. The system transducers were selected to provide superior fidelity and reliability. The design is characterized by very high power handling and excellent amplitude linearity. The X3-12 is an injection molded design that is light weight and includes an integral1 3/8" (35mm) industry standard "top hat" for use with standard loudspeaker stands. The enclosure design is very rugged and features a heavy gauge steel protective grill. The design is a light weight 15.8kg (34.8 lbs).
 
VİEW X3 SUB data sheet

VİEW X3 SUB data sheet

ÖZELLİKLER :

The P Audio X3 Sub is an active sub woofer designed for use in high output professional sound reinforcements applications. The X3 sub features a long throw 18 inch (457mm) ultra low frequency transducer in an optimally tuned and vented enclosure. The active power module features a full 1200 watts of peak power and is filtered to provide optimal summing with any full range top box. The X3 Sub amplifier section includes an electronically balanced input section that also includes a parallel thru that allows the full range signal to be used to drive additional powered loudspeaker systems. The input filter section consists of an 80Hz low pass filter and associated 80Hz high pass output. The 80Hz high pass output section will drive active top box enclosures. The input section also features a subwoofer level control that allows the user to set the sub woofer acoustic output level relative to the top box enclosure. The acoustic frequency response has been optimized to 40Hz-80Hz and is high pass bandwidth limited to insure excellent system dynamics and high reliability. The X3 Sub also includes a user settable phase adjustment feature that can improve acoustic summing if the X3 Sub and top box enclosure are not located in a vertical stack arrangement. The X3 Sub includes a user selectable AC Mains voltage switch for setting the proper AC Mains operating voltages. The X3 Sub enclosure is constructed with a rugged multilayer plywood and is covered in a very durable polyurea based coating. The design includes an industry standard 1 3/8 (35mm) top hat to allow pole mounting of a top box above the X3 Sub.
 
VİEW 308P data sheet

VİEW 308P data sheet

ÖZELLİKLER :

The 308P is a passive professional sound reinforcement system designed for both portable applications as well as installed sound applications. The P Audio 308P features 8 neodymium based full range transducers oriented in an array to provide control over both the horizontal and vertical acoustic radiation pattern. The 308P transducers feature a Kevlar based diaphragm assembly that provided a very high degree of mechanical damping. This design allows both high mechanical power handling and reliability as well as excellent vocal range clarity. System inputs are paralled 4 pin and ¼” phone connectors. System power handling is 400 watts program material and a full 200 watts of rms power. The 2 x 8 element transducer array acts to narrow the horizontal coverage pattern and increases the system coverage angle. This allows the 308P system focus its acoustic radiation pattern on the audience and not on reflective surfaces. This improves the ratio of direct sound to reflected sound and, as a consequence, improves system intelligibility. The 308P System also comes, as standard equipment, with a protective cover that may also be used as a monitor stand when the 308P is used as a floor monitor. The 308P is compatible with a variety of additional mounting and suspension hardware such as an external stand adaptor that may be positioned to allow the enclosure to be used in either a horizontal or vertical orientation. Suspension hardware is also available for the 308P. The enclosure offers 4 M4 and 2 M8 mounting points for associated mounting hardware.
 
VİEW GALLARDO-4 data sheet

VİEW GALLARDO-4 data sheet

ÖZELLİKLER :

The P Audio Gallardo- 4 is a small format high performance sound reinforcement system designed for high quality foreground and background music applications. The Gallardo- 4 is designed for both indoor and outdoor applications where music and speech reinforcement is specified. The system is ideal for use in restaurants, retail environments, bars, hotels, and other applications where high quality music systems are specified. The Gallardo-4 utilized a two element array of high output 4 inch (101.6mm) woofers. The horn loaded high frequency wave guide is positioned between the two element arrays to insure coherent and balanced high frequency response. Polar lobing is controlled by this geometry and produces a properly aimed response at the crossover frequency. The Gallardo-4 features a standard multi-tap transformer input that is switch able from a maximum of 50 watts of input power in essentially 3dB steps. The available taps are 50 watts, 25 watts, 12 watts and 5 watts. The Gallardo-4 may also be easily configured for a standard low impedance direct input. The system also features a standard mounting bracket designed for flexible aiming and easy installation. The small physical size and unique appearance of the Gallardo-4 make it an ideal installation product. It is very versatile and combines great sound with great looks.
 
VİEW X-100FW data sheet

VİEW X-100FW data sheet

ÖZELLİKLER :

The P Audio X-100FW is a passive small format loudspeaker system. The basic system is a two way design that features a 6.5 inch (165mm) low frequency driver with a Kevlar based cone. The woofer design utilizes P Audio’s high temperature voice coil technology to insure both high power handling as well as excellent system reliability. The high frequency section is a Ferrite based soft dome tweeter designed for excellent time domain response in the upper vocal range. This high frequency transducer is a 1.25 inch (31.7mm) format that also uses ultra high temperature voice coil technology. The system offers a full 200 watts of program power handling and is designed for demanding professional applications. The rated coverage pattern is 90 degrees conical (90 degrees horizontal by 90 degrees vertical). The X-100FW is an injection molded enclosure that utilizes high impact polycarbonate resins to provide a very cosmetic but rugged design. The enclosure may be ordered in either a grey or white color to match installation requirements. The metal grill provides excellent protection for the system transducers. The system may be mounted using a standard “U” bracket and also has a stand plate available. The X-100FW is a very light weight full range bi amplified system that is ideal for a wide variety of both portable and installed applications.
 
VİEW COMMERCİAL ONE data sheet

VİEW COMMERCİAL ONE data sheet

ÖZELLİKLER :

The P Audio Commercial One™ was designed to provide high performance foreground and background music and speech reproduction in a wide variety of retail, office space, restaurant and general commercial and public spaces. The Commercial One™ produces a very wide frequency response and high fidelity to provide both high vocal intelligibility and excellent music reproduction. The Commercial One™’s small physical dimensions allow the system to be used in a wide variety of installations. The system utilizes a very wide bandwidth transducer that couples both high power handling and excellent linearity. The system is equipped with a multi-tap transformer for use in both distributed systems as well as in low impedance configurations. The transformer offers 4 power taps of 25 watts, 15watts, 12 watts and 6 watts. These tap values allow the Commercial One™ to be used in both medium and small sized venues. The Commercial One™ is housed in an attractive injection molded enclosure and is equipped with a mounting bracket. The overall depth, including the mounting bracket, is 185mm (7.3 inches). This small profile allows the enclosure to be mounted in small and unobtrusive spaces.
 
VİEW C-200N data sheet

VİEW C-200N data sheet

ÖZELLİKLER :

The P Audio C-200N is an injection molded sound reinforcement system. The C-200N features an extended bandwidth 10 inch (254mm) low frequency driver and a 1 inch (25.4mm) high output compression driver coupled to a 90 degree by 65 degree high frequency horn. The C-200N is a very portable design that is excellent for use in small format live music venues, pubs, conference centers and general public address applications. The small physical size of the enclosure and light weight/high reliability components make the C-200N a very portable design. The C-200N offers a full 400 watts of program material power handling and utilizes a high order passive filter to insure excellent acoustic summing through the crossover region. The enclosure features a high conversion efficiency that insures good acoustic throw and a wide coverage pattern. The C-200N incorporates two M8 rigging points and an industry standard 35mm pole mounting socket. The enclosure is a rugged high impact polycarbonate and features a powder coated perforated metal grill. The combination of the high impact molded enclosure and heavy gauge steel grill make the C-200N an excellent choice for applications that require a very durable and high reliability design
 
VİEW C-350N data sheet

VİEW C-350N data sheet

ÖZELLİKLER :

The P Audio C-350N is an injection molded sound reinforcement system.The C-350N features an extended bandwidth 15 inch (381mm) low frequency driver and a 1 inch (25.4mm) high output compression driver coupled to a 90 degree by 65 degree high frequency horn. The C-350N is a very portable design that is excellent for use in small format live music venues, pubs, conference centers and general public address applications. The extended bass response of the 15 inch low frequency transducer will provide very full and deep bass response. The vented enclosure design also generates extended low frequency response while maintaining excellent acoustic control. The small physical size of the enclosure and light weight/high reliability components make the C-350N a very portable design. The C-350N offers a full 600 watts of program material power handling and utilizes a high order passive filter to insure excellent acoustic summing through the crossover region. The enclosure features a high conversion efficiency that insures good acoustic throw and a wide coverage pattern. The C-350N incorporates four M10 rigging points and an industry standard 35mm pole mounting socket. The enclosure is a rugged high impact polycarbonate and features a powder coated perforated metal grill. The combination of the high impact molded enclosure and heavy gauge steel grill make the C-350N an excellent choice for applications that require a very durable and high reliability design.
 
VİEW X-15P MARKII data sheet

VİEW X-15P MARKII data sheet

ÖZELLİKLER :

The P Audio X Class Mark II features many performance enhancements and upgrades. The X Class 15P Mark II utilizes a newly developed 15 inch (380mm) low frequency transducer that features Neodymium magnetics. This design offers lighter weight and substantially higher performance to weight ratios. The large 76mm diameter voice coil and ultra high temperature construction offer excellent system reliability. The X-15P Mark II is an excellent choice for both portable and fixed installation environments and is ideal for live music, speech reproduction and DJ applications. The X Class 15P Mark II also features an upgraded professional format 1.75 inch (44mm) titanium diaphragm compression driver that offers both extended bandwidth reproduction and superior vocal range intelligibility. This new medium format compression driver also utilizes Neodymium based magnetics and very high efficiency. The driver is coupled to an advanced flare rate horn that provides a rated included angle coverage pattern of 90 degrees in the horizontal axis and 45 degrees in the vertical axis. The design features optimized passive second order filters and multiple Speakon inputs for high current and high power applications. The system also features four recessed M10 rigging points for easy fixed and permanent installation as well as a standard 35mm pole mounting socket. The high impact polycarbonate enclosure and rugged design insure the X Class 15P Mark II will provide superior performance in demanding professional applications.
 
VİEW X-12P MARK II data sheet

VİEW X-12P MARK II data sheet

ÖZELLİKLER :

The P Audio X Class Mark II features many performance enhancements and upgrades. The X Class 12P Mark II utilizes a newly developed 12 inch (30mm) low frequency transducer that features Neodymium magnetics. This design offers lighter weight and substantially higher performance to weight ratios. The large 76mm diameter voice coil and ultra high temperature construction offer excellent system reliability. The X-12P Mark II is an excellent choice for both portable and fixed installation environments and is ideal for live music, speech reproduction and DJ applications. The compact enclosure design is ideal for portable applications that require high output acoustic reproduction. The system is light weight and easily transported. The X Class 12P Mark II also features an upgraded medium format 1.35 inch (34mm) titanium diaphragm compression driver that offers both extended bandwidth reproduction and superior vocal range intelligibility. This new medium format compression driver utilizes Ferrite based magnetics and very high efficiency. The driver is coupled to an advanced flare rate horn that provides a rated included angle coverage pattern of 90 degrees in the horizontal axis and 45 degrees in the vertical axis. The design features optimized passive second order filters and multiple Speakon inputs for high current and high power applications. The system also features four recessed M10 rigging points for easy fixed and permanent installation as well as a standard 35mm pole mounting socket. The high impact polycarbonate enclosure and rugged design insure the X Class 12P Mark II will provide superior performance in demanding professional applications.
 
VİEW X-12P data sheet

VİEW X-12P data sheet

ÖZELLİKLER :

The P Audio X-Class series of portable and fixed install loudspeaker systems represent a unique combination of high performance and portability. The X-12P is a two way sound reinforcement system designed for both live music and full range fixed installations. The X-12P is a 12 inch two way system that features a broad coverage advanced flair high frequency horn and a high thermal capacity woofer. The rated coverage pattern of 90 degrees in the horizontal plane and 40 degrees in the vertical plane make the system ideal for wide coverage applications such as live performance reinforcement, mobile DJ systems, dance clubs and conference reinforcement systems. The X-12P is a light weight version of the X-12HP. The X-12P offers a weight reduction of approximately 3.5 lbs (1.6kg) but has slightly reduced power handling as compared to the X-12HP. The advanced flare horn is mated with a medium format professional compression driver that features high energy neodymium magnetics. The compression driver also features a commercially Polyetherimide Film diaphragm to minimize moving mass and generate extended bandwidth. The X-12P offers world class efficiency for high sound pressure level applications. The one watt, measured at one meter, output is 97dB, making the X-12P a true world class sound reinforcement system. The system offers a rated bandwidth of 60Hz to beyond 20kHz. This wide bandwidth, coupled with a program rated power handling of over 600 watts makes the X-12P ideal for a wide range of professional level portable and fixed install systems. The X-12P features a high impact injection molded enclosure with an integral 35mm stand mount adaptor and four recessed M10 mounting point for permanent installation applications. The system is a light weight design (28.4lbs, 12.9kg) and integral handles for easy transportation. The powder coated metal grill and high impact polycarbonate enclosure insures the X-12P can provide high output acoustic response, even in harsh physical environments. The X-12P offers very linear frequency response and excellent fidelity for a wide range of professional applications.
 
VİEW X-12HP data sheet

VİEW X-12HP data sheet

ÖZELLİKLER :

The P Audio X-Class series of portable and fixed install loudspeaker systems represent a unique combination of high performance and portability. The X-12HP is a two way sound reinforcement system designed for both live music and full range fixed installations. The X-12HP is a 12 inch two way system that features a broad coverage advanced flair high frequency horn and a high thermal capacity woofer. The rated coverage pattern of 90 degrees in the horizontal plane and 40 degrees in the vertical plane make the system ideal for wide coverage applications such as live performance reinforcement, mobile DJ systems, dance clubs and conference reinforcement systems. The 12 inch woofer is a high performance design that provides both very high power handling and world class reliability. The X-12HP is ideal for performance and speech reinforcement systems. The advanced flare horn is mated with a medium format professional compression driver that features high energy neodymium magnetics. The compression driver also features a commercially pure titanium diaphragm and edge wound aluminum voice coil to minimize moving mass and generate extended bandwidth. The X-12HP offers world class efficiency for high sound pressure level applications. The one watt, measured at one meter, output is 97dB, making the X-12HP a true world class sound reinforcement system. The system offers a rated bandwidth of 60Hz to beyond 20kHz. This wide bandwidth, coupled with a program rated power handling of over 900 watts makes the X-12HP ideal for a wide range of professional level portable and fixed install systems. The X-12HP features a high impact injection molded enclosure with an integral 35mm stand mount adaptor and four recessed M10 mounting point for permanent installation applications. The system is a light weight design (31.9lbs, 14.5kg) and integral handles for easy transportation. The powder coated metal grill and high impact polycarbonate enclosure insures the X-12HP can provide high output acoustic response, even in harsh physical environments. The X-12HP offers very linear frequency response and excellent fidelity for a wide range of professional applications.
 
VİEW X-15P data sheet

VİEW X-15P data sheet

ÖZELLİKLER :

The P Audio X-Class series of portable and fixed install loudspeaker systems represent a unique combination of high performance and portability. The X-15P is a two way sound reinforcement system designed for both live music and full range fixed installations. The X-15P is a 15 inch two way system that features a broad coverage advanced flair high frequency horn and a high thermal capacity woofer. The rated coverage pattern of 90 degrees in the horizontal plane and 40 degrees in the vertical plane make the system ideal for wide coverage applications such as live performance reinforcement, mobile DJ systems, dance clubs and conference reinforcement systems. The X-15P is a light weight version of the X-15HP. The X-15P offers a weight reduction of approximately 7 lbs (3.2kg) but has slightly reduced power handling as compared to the X-15HP. The advanced flare horn is mated with a medium format professional compression driver that features high energy neodymium magnetics. The compression driver also features a commercially Polyetherimide Film diaphragm and edge wound aluminum voice coil to minimize moving mass and generate extended bandwidth. The X-15P offers world class efficiency for high sound pressure level applications. The one watt, measured at one meter, output is 98dB, making the X-15P a true world class sound reinforcement system. The system offers a rated bandwidth of 50Hz to beyond 20kHz. This wide bandwidth, coupled with a program rated power handling of over 1000 watts makes the X-15P ideal for a wide range of professional level portable and fixed install systems. The X-15P features a high impact injection molded enclosure with an integral 35mm stand mount adaptor and four recessed M10 mounting point for permanent installation applications. The system is a light weight design (35.8 lbs, 16.3kg) and integral handles for easy transportation. The powder coated metal grill and high impact polycarbonate enclosure insures the X-15P can provide high output acoustic response, even in harsh physical environments. The X-15P offers very linear frequency response and excellent fidelity for a wide range of professional applications.
 
VİEW X-15HP data sheet

VİEW X-15HP data sheet

ÖZELLİKLER :

The P Audio X-Class series of portable and fixed install loudspeaker systems represent a unique combination of high performance and portability. The X-15HP is a two way sound reinforcement system designed for both live music and full range fixed installations. The X-15HP is a 15 inch two way system that features a broad coverage advanced flair high frequency horn and a high thermal capacity woofer. The rated coverage pattern of 90 degrees in the horizontal plane and 40 degrees in the vertical plane make the system ideal for wide coverage applications such as live performance reinforcement, mobile DJ systems, dance clubs and conference reinforcement systems. The 15 inch woofer is a high performance design that provides both very high power handling and world class reliability. The advanced flare horn is mated with a medium format professional compression driver that features high energy neodymium magnetics. The compression driver also features a commercially pure titanium diaphragm and edge wound aluminum voice coil to minimize moving mass and generate extended bandwidth. The X-15HP offers world class efficiency for high sound pressure level applications. The one watt, measured at one meter, output is 98dB, making the X-15HP a true world class sound reinforcement system. The system offers a rated bandwidth of 50Hz to beyond 20 kHz. This wide bandwidth, coupled with a program rated power handling of over 1200 watts makes the X-15HP ideal for a wide range of professional level portable and fixed install systems. The X-15HP features a high impact injection molded enclosure with an integral 35mm stand mount adaptor and four recessed M10 mounting point for permanent installation applications. The system is a light weight design (42.9lbs, 19.5kg) and integral handles for easy transportation. The powder coated metal grill and high impact polycarbonate enclosure insures the X-15HP can provide high output acoustic response, even in harsh physical environments. The X-15HP offers very linear frequency response and excellent fidelity for a wide range of professional applications.
 
VİEW 3X-15A data sheet

VİEW 3X-15A data sheet

ÖZELLİKLER :

The P Audio X3-15 is a light weight high performance sound reinforcement loudspeaker enclosure. The X3-15 is an active design that incorporates a bi-amplified high power amplifier module as well as an integrated pre-amp/ mixer section. The X3-15 is a two way design the features a 15" (381mm} low frequency section and a true compression driver coupled to a 90 degree by 40 degree waveguide. The high efficiency transducers are an excellent match to the state of the art amplification section. The combination of high electrical efficiency and high acoustic sensitivity and output capability makes the X3-15 and ideal choice for a variety of professional applications. These applications include portable DJ applications, live sound venues, commercial environments and general public address requirements. The 15 inch woofer offers extended low frequency response and is ideal for program material that requires additional bandwidth. Then input section consists of both mic level (XLR balanced} and line level inputs. There is a mixing section that allows inputs to be level adjusted for optimum balance as well as individual level control for each input. The input section also features an XLR line output to allow the X3-15 to provide signal routing to additional enclosures. The pre amp also employs a master volume control for full input level flexibility. The X3-15 input section also features both low frequency and high frequency shelving equalization. The comer frequencies for both shelving equalizers were carefully selected to provide not only bass and treble boost or cut but to do so in a very musical fashion. The input section also features a very high performance 4th order (24dB/Octave) crossover system that maximizes acoustic summing through the critical crossover frequency region. This high order crossover/filter also maximizes component reliability. The power amplifier section is a bi-amp configuration that features a high efficiency class D low frequency module capable of producing a full 500 watts of peak output power. The low frequency module will generate a full400 watts of peak power and the high frequency module will produce 100 watts of peak power. Each amplifier module is fully short circuit protected. The X3-15 is an injection molded design that is light weight and includes an integral1 3/8" (35mm) industry standard "top hat" for use with standard loudspeaker stands. The enclosure design is very rugged and features a heavy gauge steel protective grill. The X3-15 is a lightweight design and is very portable
 
VİEW X3-12A data sheet

VİEW X3-12A data sheet

ÖZELLİKLER :

The PAudio X3-12 is a light weight high perfonnance sound reinforcement loudspeaker enclosure. The X3-12 is an active design that incorporates a bi-amplified high power amplifier module as well as an integrated pre-amp/ mixer section. The unique geometry of the X3-12 enclosure allows use as either a conventional sound reinforcement enclosure or as a floor monitor. The X3-12 is a very flexible design and may be used in a wide variety of professional applications. The X3-12 is a two way design the features a 12" (305mm) low frequency section and a true compression driver coupled to a 90 degree by 60 degree waveguide. The high efficiency transducers are an excellent match to the state of the art amplification section. The combination of high electrical efficiency and high acoustic sensitivity and output capability makes the X3-12 and ideal choice for a variety of professional applications. These applications indude portable DJ applications, live sound venues, commercial environments and general public address requirements. The 12 inch woofer is an excellent choice for intelligibility throughout the vocal range. Then input section consists of both mic level (XLR balanced) and line level inputs. There is a mixing section that allows inputs to be level adjusted for optimum balance as well as individual level control for each input. The input section also features an XLR line output to allow the X3-12 to provide signal routing to additional endosures. The pre amp also employs a master volume control for full input level flexibility. The X3-12 input section also features both low frequency and high frequency shelving equalization. The corner frequencies for both shelving equalizers were carefully selected to provide not only bass and treble boost or cut but to do so in a very musical fashion. The input section also features a very high performance 4th order (24dB/Octave) crossover system that maximizes acoustic summing through the critical crossover frequency region. This high order crossover/filter also maximizes component reliability. The power amplifier section is a bi-amp configuration that features a high efficiency dass D low frequency module capable of producing a full500 watts of peak output power. The low frequency module will generate a full400 watts of peak power and the high frequency module will produce 1 00 watts of peak power. Each amplifier module is fully short circuit protected. The X3-12 is an injection molded design that is light weight and includes an integral 1 3/8" (35mm) industry standard "top hat" for use with standard loudspeaker stands. The enclosure design is very rugged and features a heavy gauge steel protective grill. The design is a lightweight 18kg 39.61bs}.
 
VİEW 308A data sheet

VİEW 308A data sheet

ÖZELLİKLER :

The 308A is a powered professional sound reinforcement system designed for both portable applications as well as installed sound applications. The P Audio 308A features 8 neodymium based full range transducers coupled with a 400 watt program power (200 watts rms) integrated power amplifier. The preamplifier inputs consist of a microphone level input and line level input. The system also allows a line level “output link”. The input section provides both microphone input level adjustment as well as a master volume adjustment. This allows microphone inputs to be mixed with line level inputs. Rear panel indicators are clip and power on to allow system status monitoring. The 308A is compatible with both 115V and 230V mains via a rear panel mains selector switch. The 2 x 8 element transducer array acts to narrow the horizontal coverage pattern and increases the system coverage angle. This allows the 308A system focus its acoustic radiation pattern on the audience and not on reflective surfaces. This improves the ratio of direct sound to reflected sound and, as a consequence, improves system intelligibility. The 308A System also comes, as standard equipment, with a protective cover that may also be used as a monitor stand when the 308A is used as a floor monitor. The 308A is compatible with a variety of additional mounting and suspension hardware such as an external stand adaptor that may be positioned to allow the enclosure to be used in either a horizontal or vertical orientation. The enclosure also offers 4 M4 and 2 M8 mounting points. Suspension hardware is also available for the 308A. The enclosure is injection molded and features a very high impact polycarbonate resin.
 
VİEW X12A data sheet

VİEW X12A data sheet

ÖZELLİKLER :

The P Audio X-Class series of portable and fixed install loudspeaker systems represent a unique combination of high performance and portability. The X-12A is a powered two way sound reinforcement system designed for both live music and full range fixed installations. The X-12A contains a bi-amplified power amplifier system featuring a full 300 watts of program power. The X-12A utilizes a 12 inch low frequency loudspeaker and an advanced flare high frequency horn. The rated coverage pattern of 90 degrees in the horizontal plane and 40 degrees in the vertical plane make the system ideal for wide coverage applications such as live performance reinforcement, mobile DJ systems, dance clubs and conference reinforcement systems. The advanced flare horn is mated with a medium format professional compression driver that features high energy neodymium magnetics. The compression driver also features a commercially Polyetherimide Film to minimize moving mass and generate extended bandwidth. The P Audio X-12A was designed using a fully discrete Bi-Polar split rail high efficiency amplifier design and active filter system. The amplifier section produces a full 200 watts of low frequency program power and 100 watts of high frequency program power. The input section of the amplifier module features both line level and microphone level inputs and separate volume controls for each input, allowing mixing functions for the two inputs. The X-12A offers world class efficiency for high sound pressure level applications. The one watt, measured at one meter, output is 97dB, making the X-12A a true world class sound reinforcement system. Maximum output capability is over 120dB SPL. The system offers a rated bandwidth of 50Hz to beyond 20kHz. The X-12A features a high impact injection molded enclosure with an integral 35mm stand mount adaptor and four recessed M10 mounting point for permanent installation applications. The system is a light weight design (36.6lbs, 16.6kg) and integral handles for easy transportation. The powder coated metal grill and high impact polycarbonate enclosure insures the X-12A can provide high output acoustic response, even in harsh physical environments. The X-12A offers very linear frequency response and excellent fidelity for a wide range of professional applications.
 
VİEW X-50FX data sheet

VİEW X-50FX data sheet

ÖZELLİKLER :

The P Audio X-50FW is a passive small format loudspeaker system. The basic system is a two way design that features a 5.25 inch (133mm) low frequency driver with a Paper based cone. The woofer design utilizes P Audios high temperature voice coil technology to insure both high power handling as well as excellent system reliability. The high frequency section is a neodymium based soft dome tweeter designed for excellent time domain response in the upper vocal range. This high frequency transducer is a 1.0 inch (25.4mm) format that also uses ultra high temperature voice coil technology. The system offers a full 200 watts of program power handling and is designed for demanding professional applications. The rated coverage pattern is 90 degrees conical (90 degrees horizontal by 90 degrees vertical). The X-50FW is an injection molded enclosure that utilizes high impact polycarbonate resins to provide a very cosmetic but rugged design. The enclosure may be ordered in either a grey or white color to match installation requirements. The system may be mounted using a standard U bracket and also has a stand plate available. The X-50FW is a very light weight full range bi amplified system that is ideal for a wide variety of both portable and installed applications. . The metal grill provides excellent protection for the system transducers.
 
VİEW C18-650EL data sheet

VİEW C18-650EL data sheet

ÖZELLİKLER :

The P Audio C18-650EL is a high output low frequency transducer. The C18-650EL is an upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C18-650EL employs a large 4 inch (101.6mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The transducer is optimized for use in properly tuned vented enclosures and will provide maximal reliability when both a vented enclosure and active high pass filtering are employed. The C18-650EL utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity
 
VİEW SN8-200N data sheet

VİEW SN8-200N data sheet

ÖZELLİKLER :

The P Audio SN8-200N is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN8-250N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 8 inch (203mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN8-200N has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN8-200N features a 2.38 inch (60.5mm) diameter voice coil that provides an AES rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The SN8-250N utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios edge wound rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW E15-300S data sheet

VİEW E15-300S data sheet

ÖZELLİKLER :

The P Audio E15-300S is a high output low frequency transducer. The E15-300S is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E15-300S is 40Hz to 2000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E15-300S employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available. The E15-300S utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E-12MB data sheet

VİEW E-12MB data sheet

ÖZELLİKLER :

The P Audio E Series II features a very versatile 12 inch (312mm) transducer designed for use in professional level two way sound reinforcement systems. The E-12MB is a high performance design based around a large format 4 inch (101.6mm) diameter voice coil. This coil design will provide very high power handling and long term reliability in demanding professional applications. The multi layer voice coil utilizes high conductivity copper and very high thermal capacity adhesives to deal with the input power levels found in modern professional environments. The E-12MB utilizes a rigid stamped steel chassis mated to a large format Ferrite based permanent magnetic system. The E-12MB has been optimized using computer based modeling techniques and is rated for operation between 55Hz and 2000Hz. This rated bandwidth is ideally suited for two way designs where the high frequency response is provided by a professional level compression driver and horn combination. If elevated level mid bass operation is specified, P Audio also offers the E-12MB as an alternative to the E-12MB. A newly developed cone material substantially improves mid band time domain response and will yield superior vocal fundamentals. When full range response is specified for a two way system the E-12MB is the ideal choice to provide excellent acoustic reproduction.
 
VİEW E-12LF data sheet

VİEW E-12LF data sheet

ÖZELLİKLER :

The P Audio E Series II features a very versatile 12 inch (312mm) transducer designed for use in professional level two way sound reinforcement systems. The E-12LF is a high performance design based around a large format 4 inch (101.6mm) diameter voice coil. This coil design will provide very high power handling and long term reliability in demanding professional applications. The multi layer voice coil utilizes high conductivity copper and very high thermal capacity adhesives to deal with the input power levels found in modern professional environments. The E-12LF utilizes a rigid stamped steel chassis mated to a large format Ferrite based permanent magnetic system. The E-12LF has been optimized using computer based modeling techniques and is rated for operation between 50Hz and 2000Hz. This rated bandwidth is ideally suited for two way designs where the high frequency response is provided by a professional level compression driver and horn combination. If elevated level mid bass operation is specified, P Audio also offers the E-12LF as an alternative to the E-12LF. A newly developed cone material substantially improves mid band time domain response and will yield superior vocal fundamentals. When full range response is specified for a two way system the E-12LF is the ideal choice to provide excellent acoustic reproduction.
 
VİEW E12-350N data sheet

VİEW E12-350N data sheet

ÖZELLİKLER :

The P Audio E12-350N is a high output full range/mid bass transducer. The E12-350N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at full range frequencies and is ideal for high level full range response in both live sound and recorded music venues This transducer is ideal when used in a two way system where the E12-350N is the low frequency device. The operating bandwidth of the E12-350N is 60Hz to 3000Hz. The transducer uses very high energy neodymium based magnetics to achieve a very high acoustic output to weight ratio. The E12-350N employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 350 watts of continuous power handling and a full 1400 watts of peak rated power handling when sufficient amplifier headroom is available. The E12-350N utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E12-300S data sheet

VİEW E12-300S data sheet

ÖZELLİKLER :

The P Audio E12-300S is a high output low frequency transducer. The E12-300S is an upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E12-300S is 50Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E12-300S employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 300 watts of continuous power handling and a full 1200 watts of peak rated power handling when sufficient amplifier headroom is available. The E12-300S utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E12-200S data sheet

VİEW E12-200S data sheet

ÖZELLİKLER :

The P Audio E12-200S NEW is a high output low frequency transducer. The E12-200S NEW is an upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E12-200S NEW is 50Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E12-200S NEW employs a medium format 2.5 inch (63.7mm) diameter voice coil that provides an AES rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The E12-200S NEW utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E12-150S data sheet

VİEW E12-150S data sheet

ÖZELLİKLER :

The P Audio E12-150S is a high output low frequency transducer. The E12-150S is an upgraded design that features many of P.Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce high sound pressure levels at low frequencies and is ideal for high level full range response response in both live sound and recorded music venues. The operating bandwidth of the E12-150S is 50Hz to 4000Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E12-150S employs a medium format 2.0 inch (51.3mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The E12-150S utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E12-100F data sheet

VİEW E12-100F data sheet

ÖZELLİKLER :

The P Audio E12-100F is a high output wide range transducer. The E12-100F is an upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce high sound pressure levels at low frequencies but also exhibits an extended high frequency response that makes the E12-100F a full range device. The operating bandwidth of the E12-100F is 50Hz to12kHz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E12-100F employs a medium format 1.5 inch (38.5mm) diameter voice coil that provides an AES rated 100 watts of continuous power handling and a full 400 watts of peak rated power handling when sufficient amplifier headroom is available. The E12-100F utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology that maximizes system conversion efficiency and cooling. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E10-250N data sheet

VİEW E10-250N data sheet

ÖZELLİKLER :

The P Audio E10-250N is a high output full range/mid bass transducer. The E10-250N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 10 inch (254mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E10-250N is 70Hz to 3000Hz. The transducer uses very high energy neodymium based magnetics to achieve a very high acoustic output to weight ratio. The E10-250N employs a medium format 2.5 inch (63.5mm) diameter voice coil that provides an AES rated 250 watts of continuous power handling and a full 1000 watts of peak rated power handling when sufficient amplifier headroom is available. The E10-250N utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E10-200S data sheet

VİEW E10-200S data sheet

ÖZELLİKLER :

The P Audio E10-200S is a high output full range/mid bass transducer. The E10-200S is an upgraded design that features many of P Audios new technologies and performance upgrades. The 10 inch (254mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E10-200S is 50Hz to 3000Hz. The transducer uses high energy ferrite based magnetics to achieve a very high acoustic output to weight ratio. The E10-200S employs a medium format 2.5 inch (63.7mm) diameter voicecoil that provides an AES rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The E10-200S utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW E10-150S data sheet

VİEW E10-150S data sheet

ÖZELLİKLER :

The P Audio E10-150S is a high output full range/mid bass transducer. The E10-150S is an upgraded design that features many of P Audios new technologies and performance upgrades. The 10 inch (254mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E10-150S is 50Hz to 3000Hz. The transducer uses high energy ferrite based magnetics to achieve a very high acoustic output to weight ratio. The E10-150S employs a medium format 2 inch (50.8mm) diameter voicecoil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The E10-150S utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW K-757 data sheet

VİEW K-757 data sheet

ÖZELLİKLER :

P Audio has developed a high performance karaoke loudspeaker system that features very high fidelity and extended frequency response. The K-757 was designed for professional karaoke systems where high output and reliability are required. The K-757 is also ideally suited for high performance semi-pro and home applications where ultra high fidelity is required. The K-757 features an 8 inch (200mm) long throw low frequency transducer and two ultra high frequency super tweeters oriented to provide wide horizontal coverage. The high frequency response extends to beyond 18kHz. Both the 8 inch low frequency transducer and the high frequency drivers utilize P Audio’s legendary high thermal capacity assembly systems to insure both high power handling and high reliability. The rated power handling is 300 watts of program material. This power rating makes the K-757 ideal for both professional karaoke systems as well as high performance home systems. The K-757 is constructed of high density wood to insure the necessary stiffness and damping required for acoustic accuracy and color free response. The enclosure is finished in an attractive black color. Each ultra high frequency driver is mounted behind a functional acoustic lens to insure wide acoustic dispersion. The K-757 weighs a mere 16.9 lbs (7.7kg), making is easy to move for semi portable applications. Standard push style inputs make the K-757 easy and fast to mate with system electronics, such as the P Audio KA-8000 Karaoke Amplifier.
 
VİEW C-18ELF data sheet

VİEW C-18ELF data sheet

ÖZELLİKLER :

The Challenger Series II from P Audio represents another evolutionary step for a very successful product line. The C-18ELF is an 18 inch (476mm) diameter extended low frequency sub bass and sub woofer transducer. The large format 4 inch (101.6mm) diameter voice coil assembly provides very high power handling and extended reliability. This large coil diameter and large magnetic system couple to produce excellent thermal dissipation and excellent power compression performance in the rated operating range. The C-18ELF features an operating bandwidth of 30Hz to 100Hz and is designed for very high sound pressure level applications such as dance floor sub woofers and applications where very low frequency material is specified. The Challenger C-18ELF features an aluminum die cast chassis and optimized geometry Ferrite based permanent magnet. This design has been computer optimized for extended maximum linear excursion and is capable of generating very high acoustic power levels at very low frequencies. The suspension system is matched to the voice coil displacement to provide clean and accurate response even at high power levels. The voice coil design features a rectangular geometry wire in an edge wound configuration to produce maximized conversion efficiencies. The C-18ELF is well suited for permanent installation applications and will provide long term elevated acoustic output at very low frequencies. The C-18ELF is also excellent for generating very low frequency special acoustic effects.
 
VİEW E18-400S data sheet

VİEW E18-400S data sheet

ÖZELLİKLER :

The P Audio E18-400S NEW is a high output low frequency transducer. The E18-400S NEW is an upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating bandwidth of the E18-400S NEW is 30Hz to 200Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The E18-400S NEW employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available. The E18-400S NEW utilizes P Audios under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a heavy gauge stamped steel design that insures a very high degree of structural integrity.
 
VİEW C18-600LF data sheet

VİEW C18-600LF data sheet

ÖZELLİKLER :

The P Audio C18-600LF is a high output low frequency transducer. The C18-600LF is a upgraded design that features many of P Audios new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The operating range is 30Hz to 200Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C18-600LF employs a large 4 inc (101.6mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The transducer has been optimized for use in properly tuned vented enclosures. The addition of an active high pass filter is always recommended if ultra high input levels are expected at low frequencies. The C18-600LF utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase system fidelity and sonic accuracy. The suspension has been designed specifically for high linear displacement and extended low frequency response. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW C-15LF data sheet

VİEW C-15LF data sheet

ÖZELLİKLER :

The P Audio C-15LF is a 15 inch (386mm) diameter transducer designed for use in professional sound system applications.The C-15LF is optimized for use in two way and three way system designs where a combination of accurate bass response and excellent vocal fundamental response is specified.The Challenger Series II C-15LF uses a Ferrite based permanent magnetic system coupled to a rigid die cast aluminum chassis. The rated bandwidth is 55Hz to 2000Hz. This bandwidth is ideal for two way system designs where the high frequency response is produced by a high efficiency horn loaded compression driver. The C-15LF has been designed to produce an excellent efficiency bandwidth product that combines both great low frequency response with high sound pressure level capability. Like all transducers in the Challenger Series II, the C-15LF uses a large format permanent magnet system and an aluminum edge wound rectangular voice coil to produce both optimum efficiency and power handling. The large voice coil diameter 4 inch (101.6mm) provided a large cross sectional thermal heat sink that both produces high reliability and reduced power compression. This reliability is coupled with a newly developed cone material that substantially improves mid band vocal damping and time domain response. The C-15LF is an excellent choice for two way and three way direct radiator system designs and is ideal for both touring and fixed install public address system applications. Because the C-15LF is both efficient and offers good low frequency response this design is ideal for full range DJ and dance club systems as well.
 
VİEW C15-600EL data sheet

VİEW C15-600EL data sheet

ÖZELLİKLER :

The P Audio C15-600EL is a high output wide bandwidth transducer. The C15-600EL is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-600EL has been optimized for use in two way or three way sound reinforcement systems and has a rated operating range of 55Hz to 2000Hz. The C15-600EL employs a large 4 inc (101.6mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-600EL utilizes P Audios Auto Balanced Cooling (ABC)technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The C15-600EL also features a double spider configuration that further enhances system reliability and mechanical control. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW C15-400B data sheet

VİEW C15-400B data sheet

ÖZELLİKLER :

The P Audio C15-400B is a high performance wide bandwidth transducer. The C15-400B is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C15-400B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 2000Hz. The C15-400B features a large 3 inch (76.2mm) diameter voice coil that provides an AES rated 400 watts of continuous power handling and a full 1600 watts of peak rated power handling when sufficient amplifier headroom is available. The C15-400B utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision round inside/outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW C-12MB data sheet

VİEW C-12MB data sheet

ÖZELLİKLER :

The C-12MB has been designed specifically for use as a mid basstransducer. This 12 inch (315mm) diameter driver has been optimized for use as either a direct radiator mid bass driver or for use in a hornloaded mid bass design. The Challenger series II C-12MB is optimized for a combination of low frequency response and efficiency. The C-12MB has been designed for maximum efficiency thru the operating range of 60Hz to 2000Hz.The frequency range of 120Hz to 2000Hz is the critical mid band range where vocal fundamentals as well as fundamentals of most musical instruments are found.This area is critical to system clarity and intelligibility and the C-12MB, with its newly developed highly damped cone material, is optimized. The large format 4 inch (101.6mm) voice coil diameter produces alarge cross sectional area for maximum heat transfer and power compression. The rectangular geometry voice coil provided a professional level of power handling and critical reliability. Like all models in the Challenger Series II, the C-12MB features a large diameter Ferrite based permanent magnet coupled to an aluminum die cast chassis. Because of its very high efficiency design, the C-12MB is designed for mid bass applications only. For system designs where additional bass is required the C-12MB is a superior choice.
 
VİEW C-12LF data sheet

VİEW C-12LF data sheet

ÖZELLİKLER :

The C-12LF is a very efficient full range transducer designed for use in two way and three way sound reinforcement and public address systems. The C-12LF is a 12 inch (315mm) diameter driver that features a large Ferrite based permanent magnet and a light weight die cast aluminum chassis. When used as the bass component in a multi way design the C-12LF will provide both high acoustic output and very high reliability. High reliability and high power handling are generated by a very effective coupling of the large format 4 inch (101.6mm) diameter voice coil and edge wound rectangular aluminum to the computer designed permanent magnetic system. The large cross sectional area of the C-12LFs voice coil insures low power compression and high thermal capacity. The C-12LF has an operating bandwidth of 60Hz to 2000Hz. This bandwidth is the result of optimizing the mid band efficiency and the low frequency response. The rated bandwidth is ideal for modern two way designs where high efficiency horn and compression driver are used for the high end response. The Challenger Series II uses a newly developed cone material designed for high internal damping and accurate vocal response. The C-12LF is ideal when high intelligibility is specified for vocal fundamentals.
 
VİEW C12-500MB data sheeT

VİEW C12-500MB data sheeT

ÖZELLİKLER :

The P Audio C12-500MB is a high performance wide bandwidth transducer. The C12-500MB is an upgraded design that features many of P Audios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels in the mid band and upper mid frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C12-500MB has been optimized for use in two way or three way sound reinforcement systems. The transducer is also ideal as a mid bass driver for ultra high performance system designs and has an operating bandwidth of 60Hz to 3000Hz. The C12-500MB features a very large 4 inch (101.6mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The C12-500MB utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios ribbon rectangular wire technology to improve conversion efficiency and provide a large cross sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW C12-500B data sheet

VİEW C12-500B data sheet

ÖZELLİKLER :

The P.Audio C12-500B is a high performance wide bandwidth transducer.The C12-500B is an upgraded design that features many of PAudios new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels in the mid band and upper mid frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C12-500B has been optimized for use in two way or three way sound reinforcement systems. The transducer is also ideal as a low frequency driver for ultra high performance system designs and has an operating bandwidth of 50Hz to 3000Hz. The C12-500B features a very large 3.25 inch (82.5mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The C12-500B utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios inside/outside precision wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW SN15-350B data sheet

VİEW SN15-350B data sheet

ÖZELLİKLER :

The P Audio SN15-350B is a high performance wide bandwidth transducer. The SN15-350B is an upgraded design that features many of P Audios new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN15-350B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 2000Hz. The SN15-350B features a large 3 inch (76.2mm) diameter voice coil that provides an AES rated 350 watts of continuous power handling and a full 1400 watts of peak rated power handling when sufficient amplifier headroom is available. The SN15-350B utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios inside/outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW PST-501T data sheet

VİEW PST-501T data sheet

ÖZELLİKLER :

The P Audio A-30F is a small format magnetically shielded sound reinforcement enclosure. The design features a water resistance 4.5 inch (114mm) low frequency transducer and a neodymium based 1 inch (25.4mm) high frequency dome style tweeter. The A-30F is an excellent choice for foreground/background music applications in retail stores and the magnetic shielded design allow the A-30F to be used near video monitors and CRT based televisions. The enclosure is an excellent choice for karaoke applications as well as general purpose small format sound reinforcement applications. The 4.5 inch low frequency transducer features in inside/outside voice coil construction that provides very high efficiency and high power handling. The A-30F is rated at 60 watts of program power handling. Then A-30F enclosure is a very rugged die cast aluminum design that features rear mounting capability via an optional pan and tilt bracket and my also be suspended using an optional U bracket. The design offers controlled low frequency response and good sensitivity. This combination also makes the A-30F ideal for monitoring applications as well.
 
VİEW A-30F data sheet

VİEW A-30F data sheet

ÖZELLİKLER :

The P Audio 308 Series also features a high performance subwoofer to compliment the 308 Series powered and passive enclosures. The Sub 308 features a long throw 15 inch (381mm) diameter loudspeaker to produce extended bass and sub bass response. The SUB 308 is ideal for both high fidelity music playback as well as high impact live music applications. The SUB 308 is an excellent high performance compliment to the 308 Series and expands the range of professional applications for the entire 308 Series of products. The SUB 308 features a passive crossover that accurately sums the sub bass response with the main 308 stacks. The 15 inch long throw transducer features a large 3 inch (76.2mm) voice coil diameter and P Audio’s legendary voice coil systems to insure both high power handling and high reliability for truly professional applications. The enclosure is a rugged wood construction that is ideally suited for sub woofer applications. The combined SUB 308 and 308A (or 308P) are well suited for live sound reinforcement, mobile DJ, dance clubs, and pub environments. The system is also excellent for very high performance music playback systems in fixed installation designs.
 
VİEW SUB-308 data sheet

VİEW SUB-308 data sheet

ÖZELLİKLER :

The P Audio 308 Series also features a high performance subwoofer to compliment the 308 Series powered and passive enclosures. The Sub 308 features a long throw 15 inch (381mm) diameter loudspeaker to produce extended bass and sub bass response. The SUB 308 is ideal for both high fidelity music playback as well as high impact live music applications. The SUB 308 is an excellent high performance compliment to the 308 Series and expands the range of professional applications for the entire 308 Series of products. The SUB 308 features a passive crossover that accurately sums the sub bass response with the main 308 stacks. The 15 inch long throw transducer features a large 3 inch (76.2mm) voice coil diameter and P Audio’s legendary voice coil systems to insure both high power handling and high reliability for truly professional applications. The enclosure is a rugged wood construction that is ideally suited for sub woofer applications. The combined SUB 308 and 308A (or 308P) are well suited for live sound reinforcement, mobile DJ, dance clubs, and pub environments. The system is also excellent for very high performance music playback systems in fixed installation designs.
 
VİEW C-18LF data sheet

VİEW C-18LF data sheet

ÖZELLİKLER :

The Challenger Series II C-18LF has been designed to provide very high acoustic output from 40Hz to 120Hz. This 18 inch (476mm) diameter woofer has an optimized efficiency/bandwidth product that provided maximum efficiency with standard sound reinforcement frequency range requirements for subwoofer applications. It is typical to band limit large format touring systems and permanent installation public address systems to prevent the input of damaging ultra low frequency material. Because this low frequency protection is generally set to the range of 40Hz the C-18LF has been optimized to provide maximum output in the typical operating range. The large diameter voice coil design features a 4 inch (101.6mm) voice coil diameter and large cross sectional area coil for maximum heat dissipation. The C-18LF alsofeatures an aluminum based edge wound voice coil construction. The C-18LF is a Ferrite magnetics based design that also features a rugged aluminum die cast chassis.The mechanical suspension system has been optimized for high linear displacement within the rated operating range and input power rating of the transducer. This high efficiency design will produce high impact bass performance and is well suited for touring sound applications and permanent installation systems where live music is the dominant input signal.
 
VİEW PH-180 data sheet

VİEW PH-180 data sheet

ÖZELLİKLER : 

The PH-180 is a short throw, axis asymmetric horn design. The horn features a nominal 100 degree horizontal by 60 degree vertical radiation pattern and is ideal for applications where asymmetric acoustic radiation is specified. The medium format 1.0 inch (25.4mm) throat design is ideal for high sound pressure levels and low distortion through the mid band frequency range. The 1.0 inch diameter screw on throat design is a common diameter for many compression drivers. The PH-180 offers a square mouth design that allows for horn rotation within an enclosure. The horn mouth width is ideal for use with 8 inch and larger loudspeakers in professional level two way system designs. The horn is compatible with many competitive compression driver designs because of its industry standard throat diameter. The PH-180 is constructed from high impact ABS with additional glass fillers for superior structural support and rigidity. The PH-180 may be used with the following P.audio professional compression drivers. ( or any industry standard compatible driver ) - BM-D340S - BM-D440S - BM-D450S - PreNeo-340S
 
VİEW PHT-411 data sheet

VİEW PHT-411 data sheet

ÖZELLİKLER :

The PHT-411 is a rectangular geometry high frequency integrated horn and driver that features a 100 degree horizontal by 40 degree vertical radiation pattern. This design features a constant directivity style horn and offers a rated bandwidth of 2kHz to beyond 16kHz. The PHT-411 offers a very high sensitivity of 105dB when measured with a one watt input at a distance of one meter making the device an excellent mid range and ultra high frequency device in two way sound reinforcement systems. The PHT-411 is ideal when used with a 12 inch or 15 inch low frequency transducer in a two way design. The integrated horn and driver is used in many professional two way designs. The PHT-411 utilizes a small format 1 inch (25.4mm) diameter diaphragm assembly that is optimized for extended piston range response The PHT-411 is ideal as a high frequency device for portable high performance sound reinforcement systems. The device is constructed of a very rigid glass reinforced ABS resin that offers both superior structural support as well as excellent mechanical damping.
 
VİEW PH-4528 data sheet

VİEW PH-4528 data sheet

ÖZELLİKLER : 

The PH-4528 is a medium to long throw, high Q horn design. The horn features a 60 degree horizontal by 40 degree vertical radiation pattern and is ideal for applications where very directional acoustic radiation is specified. The large diameter 2 inch throat design is ideal for high sound pressure levels and low distortion through the mid band frequency range. The 2 inch diameter throat make the PH-4528 compatible with many P Audio PreNeo and BMD series professional compression drivers. The PH-4528 offers a wide horizontal mouth and improves pattern control to below 1000Hz. The width of the horn makes the PH-4528 ideal for use with 15 inch loudspeakers in professional level two way system designs. The horn is compatible with many competitive compression driver designs because of its industry standard throat diameter. The PH-4528 is constructed from high impact ABS with additional glass fillers for superior structural support and rigidity. The PH-4528 may be used with the following P.audio professional compression drivers. ( or any industry standard compatible driver ) - BM-D750 - PreNeo-750
 
VİEW PH-4525 data sheet

VİEW PH-4525 data sheet

ÖZELLİKLER : 

The PH-4525 high frequency horn design is very similar to the PH-3223 except the horn mouth width is 17.72 inches (450mm) wide. This additional width improves horizontal pattern control and extends the low frequency operation limit to below 1000Hz. The horizontal beamwidth control is superior below 1000Hz. The PH-4525 is a 2 inch (50 mm) large diameter throat design and is compatible with many P Audio PreNeo and BMD series professional compression drivers. The PH-4525 is a high performance mid range horn designed to provide superior vocal and mid range control. The horn width makes the PH-4525 ideal for use with 15 inch loudspeakers in a professional level two way design. The horn is constructed of high impact ABS with additional glass filling for superior structural support and rigidity. The PH-4525 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D750 - PreNeo-750N
 
VİEW PH-4220 data sheet

VİEW PH-4220 data sheet

ÖZELLİKLER : 

The P Audio PH-4220 is very similar in design to the PH-2370 but features a taller vertical dimension. The increased vertical dimension provides improved vertical pattern control. The PH-4220 is a bolt on throat design with a 1 inch (25.4mm) throat diameter. The PH-4220 is designed for use with the P Audio PreNeo and BMD series professional compression drivers. Because the PH-4220 uses an industry standard bolt on style mounting method, the horn is compatible with many competitive compression drivers as well. The construction is a high impact ABS will glass filling added for additional structural support and rigidity. The acoustic loading offers controlled response down to 1200Hz. The PH-4220 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D440 - BM-D450 - PreNeo-450N - PA-DE34
 
VİEW PH-3520 data sheet

VİEW PH-3520 data sheet

ÖZELLİKLER : 

The PH-3520 is a medium to long throw high frequency horn. The design is a constant directivity style that provides a rated coverage pattern of 60 degree by 40 degree. The rectangular mouth geometry provides excellent coverage control in the horizontal plane. The PH-3520 is a 1 inch (25.4mm) throat design that is an industry standard and compatible with a wide variety of P Audio PreNeo and BMD series professional compression drivers. The PH-3520 is constructed of high impact ABS and the horn mouth dimensions of 13.5 inches (345mm) by 7.7 inches (197mm) make the horn ideal for use in medium to long throw professional level sound reinforcement systems where the low frequency section is provided by either a 12 inch or 15 inch direct radiator loudspeaker. The large mouth dimensions allow the horn to be used below 1000Hz. The PH-3520 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D440 - BM-D450 - PreNeo
 
VİEW PH-3223 data sheet

VİEW PH-3223 data sheet

ÖZELLİKLER : 

The PH-3223 is a medium format horn that features a 90 degree horizontal by 55 degree vertical radiation pattern. This makes the horn ideal for short throw applications where wide dispersion is specified.The PH- 3223 has a large diameter 2 inch ( 50 mm) throat diameter designed to accommodate several P Audio PreNeo and BMD series professional compression drivers. The large diameter throat is excellent for mid band reproduction, particularly through the upper vocal range. The large horn mouth dimensions of 12.71 inches (323mm) by 9.21 inches (233mm) provide good pattern control and acoustic loading tobelow1000Hz. Large throat diameter horns are well suited for mid band applications. The PH-3223 is constructed of high impact ABS with additional glass filling for additional structural support and rigidity. The PH-3223 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D750 - PreNeo-
 
VİEW PH-3220 data sheet

VİEW PH-3220 data sheet

ÖZELLİKLER : 

The PH-3220 is a medium format high frequency horn designed for use in professional sound reinforcement systems. The PH-3220 has a nominally rated radiation pattern of 100 degree horizontal by 60 degree vertical. This rated coverage pattern makes the horn and ideal choice for use in high level two way 12 inch or 15 inch system designs. The rectangular mouth geometry allows for a wide horizontal coverage and the mouth horizontal dimension maintains excellent coverage control to below 1000Hz. The PH-3220 features a 1 inch (25.4mm) diameter bolt on throat design. This 1 inch diameter design allows many of the P Audio PreNeo and BMD series professional compression drivers to be coupled to the horn. Because the 1 inch throat is an industry standard, the PH-3220 is also compatible with a wide variety of competitive professional level compression drivers. The PH-3220 is a rugged and structurally sound injection molded design. A very high impact ABS resin utilizing glass filler provides a high degree of structural support for the compression driver. The PH-3220 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D440 - BM-D450 - PreNeo-450N - PA-DE34
 
VİEW PH-3022 data sheet

VİEW PH-3022 data sheet

ÖZELLİKLER : 

The P Audio PH-3022 is a wide bandwidth high frequency horn. The flat front design allows the PH-3022 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The included angles of 60 degrees and 40 degrees make the horn a very high performance medium to long throw high frequency wave guide. The horn mouth is a rectangular geometry that allows the PH-3022 to be used in low profile system designs. The PH-3022 features a 1.4 inch (35.5mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers. The 1.4 inch throat geometry is an industry standard and this makes the horn compatible with many other compression drivers as well. This throat geometry also provides for controlled beam widths at higher frequencies as well. The medium format mouth area provides excellent acoustic loading to below 1000Hz, making the horn ideal for wide range and low frequency crossover points. The PH-3022 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 12.2 inches (310mm) by 8.9 inches (226mm) make the PH-3022 an ideal mate for both 12 inch low frequency woofers as well as 15 in woofers. The horn is an ideal choice for professional level two way system designs where medium to long throw is required and low profile vertical enclosure dimensions are required. The PH-3022 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D740 - PreNeo-740N
 
VİEW PH-2723 data sheet

VİEW PH-2723 data sheet

ÖZELLİKLER : 

The PH-2723 is a large format throat high frequency horn. The 2 inch (50 mm) design is optimized for high pressure mid band response. The PH-2723 is compatible with a variety of P Audio PreNeo and BMD series professional compression drivers. The rated coverage angles of 60 for medium to long throw high output applications. Because the 2 inch throat diameter is an industry standard, the PH-2723 may be used with many competitive compression drivers as well. The horn construction is a high impact ABS with glass filling to provide superior structural support for the compression driver. The PH-2723 is designed for use in high output professional sound reinforcement systems where long throw is specified. The horn is also ideal for applications where very specific acoustic coverage areas are specified. Excellent acoustic loading allows the horn to be used to below 1000Hz. The PH-2723 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D750 - PreNeo-750N
 
VİEW PH-2513 data sheet

VİEW PH-2513 data sheet

ÖZELLİKLER : 

The PH-2513 is a short throw horn design. The horn features a rectangular mouth geometry with a 90 degree horizontal by 65 degree vertical radiation pattern and is ideal for applications where low Q directional acoustic radiation is specified. The 1 inch (25.4mm) throat design is ideal for high sound pressure levels and low distortion through the mid band frequency range. The 1 inch diameter screw on throat design makes the PH-2513 compatible with many P Audio PreNeo and BMD series professional compression drivers. The PH-2513 offers a wide horizontal mouth and offers a wide dispersion pattern to below 1000Hz. The width of the horn makes the PH-2513 ideal for use with 15 inch loudspeakers in professional level two way system designs. The horn is compatible with many competitive compression driver designs because of its industry standard throat diameter. The PH-2513 is constructed from high impact ABS with additional glass fillers for superior structural support and rigidity. The PH-2513 may be used with the following P.audio professional compression drivers. ( or any industry standard compatible driver ) - BM-D340S - BM-D440S - BM-D450S - PreNeo-340S
 
VİEW PH-2510

VİEW PH-2510

ÖZELLİKLER : 

The PH-2510 is a diffraction style high frequency horn. The low profile height of 4.33 inches (112mm) makes the PH-2510 an excellent choice for applications where a short system height is desired or specified. The mouth dimensions of 4.33 inches (110mm) by 10.36 inches (259mm) provide a wide 100 degree horizontal coverage. The narrow mouth also provides a wide vertical coverage by acting as a diffraction slot. The vertical coverage of 80 degree makes the PH-2510 ideal for very wide dispersion applications and short throw. The PH-2510 is a 1 inch (25.4mm) screw on type horn and is compatible with many P Audio PreNeo, BMD and PA series professional compression drivers. The horn construction is a high impact ABS material with glass filling to provide additional structural support for the compression driver. The PH-2510 may be used in two way systems where the low frequency component is a 10 inch, 12 inch or 15 inch loudspeaker. Good acoustic loading allow the horn to be used down to 1200Hz. The PH-2510 may be used with the following P.audio professional compression drivers. ( or any industry standard compatible driver ) - BM-D440S - BM-D450S - PreNeo-340S - PA-D25 - PA-D26S - PA-D26SPN - PA-D38 - PA-D415S - PA-DE34S
 
VİEW PH-2420 data sheet

VİEW PH-2420 data sheet

ÖZELLİKLER : 

The PH-2420 is a 1 inch bolt on style high frequency horn. The design features a 90 degree horizontal by 40 degree vertical radiation pattern. The PH-2420 is ideal for use in two way sound reinforcement systems where the low frequency component is a 10 inch, 12 inch or 15 inch loudspeaker. The horn may be used as part of a medium format sound reinforcement system in applications such as retail locations, foreground and background music reproduction systems and in restaurants. The PH-2420 is an injection molded design that utilizes very high impact ABS with glass filling for additional structural support. The screw on 1 inch throat is compatible with a wide variety of P Audio compressions drivers such as the PreNeo and BMD series professional compression drivers. The acoustic loading allows the PH-2420 to be used down to 1200Hz The PH-2420 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D440 - BM-D450 - PreNeo-450N - PA-DE34
 
VİEW PH-2370 data sheet

VİEW PH-2370 data sheet

ÖZELLİKLER : 

The P Audio PH-2370 is a rectangular geometry small/medium format high frequency horn. The PH-2370 features a 90 degree by 40 degree included angle radiation pattern and was designed for use with any industry standard 1 (25.4mm) nominal diameter bolt on compression driver. The rectangular mouth geometry makes the PH-2370 ideal for use in two way sound reinforcement system designs where the low frequency component is a high quality 12 or 15 device. The construction is a rugged injection molded design that provides superior strength and excellent mechanical damping. The PH-2370 may be used with a wide range of P Audio high performance compression drivers and provides excellent bandwidth and polar pattern control.
 
VİEW PH-220 data sheet

VİEW PH-220 data sheet

ÖZELLİKLER : 

The P Audio PH-220 is a fully rotatable, medium format high frequency horn. Because the horn mouth is square, the horn may be rotated to optimize coverage based on the acoustic environment. The radiation pattern is a nominal 90 degree by 75 degree. The square horn mouth allows the pattern to be either a 90 degree horizontal by 75 degree vertical coverage pattern or a 75 degree horizontal by 90 degree vertical pattern. The mouth area is large enough to provide excellent acoustic loading to below 1000Hz. The PH-220 features a 1 inch (25.4mm) throat diameter. The mounting configuration is bolt on style and is compatible with many of the P Audio PreNeo and BMD series professional compression drivers. The horn mouth dimensions allow the PH-220 to be used in a wide variety of professional applications such as two way and three way high level sound reinforcement systems as well as near field reinforcement designs. The PH-220 is also ideal for stage monitoring applications. The PH-220 is a rugged die cast aluminum design and is coated in a non reflective black paint. Because the horn utilizes an industry standard 1 inch bolt on connection for the compression driver, the PH-220 may be used with a wide variety of competitive compression drivers as well. Good acoustic loading allow the horn to be used down to 1200Hz. The PH-220 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D440 - BM-D450 - PreNeo-450N - PA-DE34
 
VİEW CL35-PreNeo data sheet

VİEW CL35-PreNeo data sheet

ÖZELLİKLER : 

The P Audio CL35-PreNeo is a high frequency wave guide coupled to a PreNeo-740N high output compression driver. The converging lens wave guide and compression driver are designed for use in line array sound reinforcement systems or whenever planar wave-fronts are required. The CL35- PreNeo produces extremely coherent output with a rated frequency range of 1000Hz to 16kHz. The CL35-PreNeo may be used as a single device in planar front sound reinforcement systems or be stacked vertically in a two high configuration for very high output line array system designs. Applications information may be found in the P Audio white paper titled CL Wave Guide Applications in the High Frequency section of the P Audio web site. (www.paudiothailand.com). This white paper describes basic 90 degree and 120 degree horizontal pattern control configurations typical in modern line array system designs. The CL35-PreNeo is a converging acoustic lens design that achieves excellent time coherence over the entire front of the wave guide mouth. This converging acoustic lens design acts to convert the naturally diverging spherical wave fronts found in typical wave guides to a more planar, time coherent wave front suitable for use in large format or arrayed linear geometry loudspeaker system designs. The physical design of the horizontal exit width allows for the addition of customer configured horizontal radiation control boundaries of up to 120 degrees. The addition of simple mounting holes in the front flanges allow the customer supplied control boundary (horn) to be easily mounted to the CL35-PreNeo. The recommended low frequency limit of the device is 1000Hz. Although the flare rate of the device is a lower frequency, 1000Hz is recommended to provide both good loading and reliability to the selected compression driver. The CL35-PreNeo is a rugged die cast aluminum design that couples to the large format neodymium based PreNeo-740N. The CL35-PreNeo is an excellent high frequency addition for conventional two way and three way single enclosure designs and can be easily combined to stack in multiple vertical configurations. The edge to edge physical spacing of the wave guide allow for superior coupling at very high frequencies.
 
VİEW PH-170 data sheet

VİEW PH-170 data sheet

ÖZELLİKLER :

The PH-170 is an elliptical wave guide high frequency horn. The PH-170 features a 1 inch (25.4mm) throat design that is compatible with bolt on high frequency drivers. Many of the new P Audio PreNeo and BMD series professional drivers are compatible with the PH-170. The rated coverage pattern is 90 degree horizontal by 65 degree vertical. This pattern and the horns small physical size make it ideal for small foreground and background music reinforcement sound systems typically found in restaurants and retail locations. The PH-170 is constructed from high impact ABS with glass fill to provide a high degree of structural support for the compression driver.The PH-170 is ideally mated to 10 inch, and 12 inch low frequency loudspeakers. The acoustic loading allows the horn to be used down to 1200Hz. The PH-170 may be used with the following P.audio professional compression drivers. ( or any industry standard compatible driver ) - BM-D440 - BM-D450 - PreNeo-450N - PA-DE34
 
VİEW PH-240 data sheet

VİEW PH-240 data sheet

ÖZELLİKLER :

The P Audio PH-240 is a small format high frequency horn that is ideal for incorporating high output professional compression drivers into compact sound reinforcement systems. The PH-240 is a 1 inch (25.4mm) screw on type that is designed to mate with many of the P Audio PreNeo, BMD and PA series professional compression drivers. The PH-240 radiation pattern is a nominal 90 degree horizontal by 55 degree vertical. This pattern is excellent for short throw systems designed for broad horizontal coverage in wide acoustic spaces. The mouth dimensions of 6.4 inches (162mm) by 9.6 inches (243mm) and flat front geometry make the PH-240 ideal for inclusion in high output two way designs where the low frequency section is either a 10 inch, 12 inch or 15 inch professional grade loudspeaker. The construction is high impact ABS with glass filling for provide substantial structural support for the compression driver. Good acoustic loading allow the horn to be used down to 1200Hz. The PH-240 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D440S - BM-D450S - PreNeo-340S - PA-D25 - PA-D26S - PA-D26SPN - PA-D38 - PA-D415S - PA-DE34S
 
VİEW PH-305 data sheet

VİEW PH-305 data sheet

ÖZELLİKLER :

The P Audio PH-305 is a wide bandwidth high frequency horn. The PH-305 is flare rate optimized for additional mid band acoustic loading. The square mouth allows a “rotatable” directivity configuration. The PH-305 may be rotated between a nominal 60 degree horizontal and 40 degree vertical pattern to a nominal 40 degree horizontal by 60 degree vertical coverage pattern. The flat front design allows the PH-305 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The nominal included angles of 60 degrees and 40 degrees make the PH-305 a very high performance medium to long throw high frequency wave guide. This makes the horn ideal for high Q coverage requirements. The PH-305 features a 1.4 inch (35.5mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers. The 1.4 inch throat geometry is an industry standard and this makes the horn compatible with many other compression drivers as well. This throat geometry also provides for controlled beamwidth at higher frequencies as well. The medium format mouth area and optimized flare rate provides excellent acoustic loading to below 1000Hz, making the PH-305 ideal for wide range and low frequency crossover points. The PH-305 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 12 inches (304mm) by 12 inches make the horn an ideal mate for both 12 inch low frequency woofers as well as 15 in woofers. The PH-305 is an ideal choice for professional level two way system designs when additional acoustic loading is required near the compression driver cutoff freuqency . The PH-305 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D740 - PreNeo-740N
 
VİEW PH-942 data sheet

VİEW PH-942 data sheet

ÖZELLİKLER :

The P Audio PH-942 is a wide bandwidth high frequency horn. The PH-942 is a constant directivity design that features a square mouth that allows a “rotatable” directivity configuration. The PH-942 may be rotated between a 90 degree horizontal and 40 degree vertical pattern to a 40 degree horizontal by 90 degree vertical coverage pattern. The flat front design allows the PH-942 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The included angles of 90 degree and 40 degree make the PH-942 a very high performance short throw high frequency wave guide. This makes the PH-942 ideal for wide coverage requirements as well as for down fill applications. The PH-942 features a 2 inch (50.0mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers. The 2 inch throat geometry is an industry standard and this makes the PH-942 compatible with many other compression drivers as well. This throat geometry also provides for controlled beam widths at higher frequencies as well. The medium format mouth area provides excellent acoustic loading to below 1000Hz, making the PH- 942 ideal for wide range and low frequency crossover points. The PH-942 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 12 inches (315 mm) by 12 inches make the PH-942 an ideal mate for both 12 inch low frequency woofers as well as 15 in woofers. The PH-942 is an ideal choice for professional level two way system designs. The PH-942 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D750 - PreNeo-750N
 
VİEW PH-85 data sheet

VİEW PH-85 data sheet

ÖZELLİKLER :

The P Audio PH-85 is a wide bandwidth high frequency horn. The PH-85 is a constant directivity design that features rectangular mouth geometry. The horizontal included angle is 80 degree and the vertical included angle 50 degree. This low profile design allows the PH-85 to be used in very high acoustic output system designs that require a short vertical height. The flat front design allows the PH-85 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The radiation pattern of 80 degree by 50 degree make the PH-85 a very high performance short throw high frequency wave guide. This makes the PH-85 ideal for wide coverage requirements as well as for down fill applications. The physical size of the PH-85 is also excellent for very high pressure floor monitor designs. The PH-85 features a 1.4 inch (35.5mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers. The 1.4 inch throat geometry is an industry standard and this makes the PH-85 compatible with many other compression drivers as well. This throat geometry also provides for controlled beamwidths at higher frequencies as well. The medium format mouth area provides excellent acoustic loading to below 1000Hz, making the PH-85 ideal for wide range and low frequency crossover points. The PH-85 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 13.22 inches (336mm) by 7.12 inches (181mm) make the PH-85 an ideal mate for both 12 inch low frequency woofers as well as 15 in woofer. The PH-85 is an ideal choice for professional level two way system designs and stage monitors . The PH-85 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D740 - PreNeo-740N
 
VİEW PH-94 data sheet

VİEW PH-94 data sheet

ÖZELLİKLER :

The P Audio PH-94 is a wide bandwidth high frequency horn. The PH-94 is a constant directivity design that features a square mouth that allows a “rotatable”directivity configu ration.ThePH-94may be rotatedbetween a 90 degree horizontal and 40 degree vertical pattern to a 40 degree horizontal by 90 degree vertical coverage pattern. The flat front design allows the PH-94 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The included angles of 90 degrees and 40 degrees make the PH-94 a very high performance short throw high frequency wave guide. This makes the PH-94 ideal for wide coverage requirements as well as for down fill applications. The PH-94 features a 1.4 inch (35.5mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers.The 1.4 inch throat geometry is an industry standard and this makes the PH-94 compatible with many other compression drivers as well. This throat geometry also provides for controlled beamwidths at higher frequencies as well. The medium format mouth area provides excellent acoustic loading to below 1000Hz, making the PH-94 ideal for wide range and low frequency crossover points. The PH-94 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver.The horn mouth dimensions of 12 inches (315 mm) by 12 inches make the PH-94anideal mate forboth12 inches low frequency woofers as well as 15 in woofers. The PH-94 is an ideal choice for professional level two way system designs. The PH-94 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D740 - PreNeo-740N
 
VİEW PH-642 data sheet

VİEW PH-642 data sheet

ÖZELLİKLER :

The P Audio PH-642 is a wide bandwidth high frequency horn. The PH-642 is a constant directivity design that features a square mouth that allows a “rotatable” directivity configuration. The PH-642 may be rotated between a 60 degree horizontal and 40 degree vertical pattern to a 40 degree horizontal by 60 degree vertical coverage pattern. The flat front design allows the PH-642 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The included angles of 60 degree and 40 degree make the PH-642 a very high perfor-mance medium to long throw high frequency wave guide. The PH-642 features a 2 inch (50.0mm) diameter throat and is compatible with many of P Audio’s PreNeo and BM-D series high performance compression drivers. The 2 inch throat geometry is an industry standard and this makes the PH-642 compatible with many other compression drivers as well. This throat geometry also provides for controlled beam widths at higher frequencies as well. The medium format mouth area provides excellent acoustic loading to below 1000Hz, making the PH-642 ideal for wide range and low frequency crossover points. The PH-642 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 12 inches (315 mm) by 12 inches make the PH-642 an ideal mate for both 12 inch low frequency woofers as well as 15 in woofers. The PH-642 is an ideal choice for professional level two way system designs where medium to long throw is required. The PH-642 may be used with the following P.audio professional compression drivers. ( or any industry standard compatible driver ) - BM-D750 - PreNeo-750N
 
VİEW PH-641S data sheet

VİEW PH-641S data sheet

 
VİEW PH-64 data sheet

VİEW PH-64 data sheet

ÖZELLİKLER :

The P Audio PH-64 is a wide bandwidth high frequency horn. The PH-64 is a constant directivity design that features a square mouth that allows a “rotatable” directivity configuration.The PH-64 may be rotated between a 60 degree horizontal and 40 degree vertical pattern to a 40 degree horizontal by 60 degree vertical coverage pattern. The flat front design allows the PH-64 to be used in modern professional sound reinforcement systems where a flat front system geometry is specified. The included angles of 60 degree and 40 degreemake thePH-64 a very high perfor mance medium to long throw high frequency wave guide. The PH-64 features a 1.4 inch (35.5mm) diameter throat and is compatible with many of P Audio’s PreNeo and BMD series high performance compression drivers. The 1.4 inch throat geometry is an industry standard and this makes the PH-64 compatible with many other compression drivers as well.This throat geometry also provides for controlled beamwidths at higher frequencies as well. The medium format mouth area provides excellent acoustic loading to below 1000Hz, making the PH-64 ideal for wide range and low frequency crossover points. The PH-64 construction is a rugged glass filled ABS and is fully braced to provide excellent structural support to the mated compression driver. The horn mouth dimensions of 12 inches (315 mm) by 12 inches make the PH-64 an ideal mate for both 12 inch low frequency woofers as well as 15 in woofers. The PH-64 is an ideal choice for professional level two way system designs where medium to long throw is required. The PH-64 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D740 - PreNeo-740N
 
VİEW PHT-416

VİEW PHT-416

ÖZELLİKLER :

The P Audio PHT-416 is an elliptical wave guide integrated high frequency horn and driver. The driver is operating in true compression mode. The elliptical mouth geometry is a small format design with a horizontal dimension of 7.8 inches (200mm). The vertical mouth dimension of 4.7 inches (120mm) allows the PHT-416 to be used in compact sound reinforcement designs. The integrated horn and driver may be used as the high frequency driver in systems utilizing woofers ranging from 8 inch diameter up to 12 inches in diameter. The PHT-416 offers a rated bandwidth of 1.5 kHz to beyond 16 kHz. The rated coverage angles are nominally 90 degree in the horizontal plane and 40 degree in the vertical plane. The small physical size of the PHT- 416 make it ideal for foreground and background system designs used in pubs, night clubs, restaurants, and general sound reinforcement systems. The horn is constructed using a rugged ABS resin with additional glass filling for increased structural integrity.
 
VİEW PHT-415 data sheet

VİEW PHT-415 data sheet

ÖZELLİKLER :

The P Audio PHT-415 is a very wide mid range and extended high frequency integrated horn and driver system. The PHT-415 is ideally suited for two way portable sound reinforcement systems. This integrated horn and driver is used in many professional two way designs, particularly in systems used by DJ’s and touring club acts. The PHT-415 offers a high sensitivity of 105dB, making the device an excellent choice for systems that use either a 12 inch or 15 inch professional quality woofer as the low frequency transducer. Because the system utilizes a small format 1 inch (25.4mm) diameter diaphragm assembly, the PHT-415 offers superb piston range extension. The PHT-415 is an injection molded design that offer extended horizontal radiation control due to its large 10.5 inch (267mm) acoustic mouth width. The horn mouth is a radially curved front and insures excellent pattern control. The rated coverage pattern is 100 degree in the horizontal plane and 80 degree in the vertical plane. The vertical plane dispersion is provided by a diffraction style mouth. The horn is constructed using a rugged ABS resin with additional glass filling for increased structural integrity.
 
VİEW SN6-200MB data sheet

VİEW SN6-200MB data sheet

ÖZELLİKLER :

The P Audio SN6-200MB is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-200MB is an upgraded design that features many of P Audios new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN6-200MB has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN6-200MB features a 2 inch (50.8mm) diameter voice coil that provides an AES rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-200MB utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios edge wound rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW PH-2380 data sheet

VİEW PH-2380 data sheet

ÖZELLİKLER : 

The P Audio PH-2380 is a 2 inch ( 50 mm) throat high frequency horn. The PH-2380 is a horizontal format horn with a 17.5 inch (443mm) wide by 11 inch (280mm) mouth. This large horn mouth insures excellent pattern control down to below 1000Hz. The rated horizontal coverage angle is 90 degree and the vertical coverage is 40 degree. This set of included angles makes the PH-2380 an excellent choice for two way sound reinforcement systems. The 2 inch throat diameter is an industry standard that is designed to mate to many of the P Audio PreNeo and BMD professional compression drivers. The PH-2380 is constructed of very high impact ABS with a glass filling to insure additional stability and structural rigidity.The large throat diameter makes the PH-2380 an ideal device for reproduction of low distortion vocal material and general mid band program material. Excellent acoustic loading allow the horn to be used to below 1000Hz. The PH-2380 may be used with the following P.audio professional compression drivers. (or any industry standard compatible driver ) - BM-D750 - PreNeo-750N
 
VİEW PA-D415S data sheet

VİEW PA-D415S data sheet

ÖZELLİKLER : 

The P Audio PA-D415S is a small format diaphragm compression driver designed for mid range and extended high frequency applications in two way professional sound reinforcement systems. The small format design is excellent for wide bandwidth applications and is ideal for medium sized sound reinforcement systems using 8 inch (203mm) and 10 inch (254mm) woofers. The driver has a rated bandwidth of 1.2kHz to beyond 20kHz. This wide bandwidth makes the PA-D415S ideal for many mid range applications as well as wide range ultra high frequency applications. The PA-D415S is a Ferrite based permanent magnet system that features a 1.35 inch (34.4mm) diameter commercially pure aluminum diaphragm assembly. The design is very similar to the PA-D34S but is more economical due to its smaller format permanent magnetic system. This makes the driver ideal for small to medium sized two way systems designed for foreground and background music reproduction system designs. The driver features a mid band output rating of 100dB with a one watt input measured at one meter. This design features P Audios legendary high temperature systems to insure both high power handling and high reliability. The PA-D415S features an industry standard 1 inch screw on style exit that allows the driver to easily mate to any high frequency horn with a standard 1 inch screw on mounting.
 
VİEW WN-D44 data sheet

VİEW WN-D44 data sheet

ÖZELLİKLER :

The P Audio WN-D44 is a medium format compression driver that utilizes a precision formed diaphragm assembly. The diaphragm assembly is close spaced to a close spaced phase plug to insure excellent acoustic loading. The WN-D44 has an operating range of 2000Hz to 20kHz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The large format diaphragm provides excellent acoustic output capacity and very low distortion. The WN-D44 is a neodymium based magnetic system with an industry standard 1.0 inch (25.4mm) exit diameter. The voice coil is precision rectangular wire geometry. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the WN-D44. The diaphragm assembly is a 1.75 inch(44.4mm) diameter treated titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 40 watts of power handling capacity when the crossover frequency is 2200Hz. The WN-D44 is capable of a full 80 watts of power handling capacity when a crossover frequency of greater then 4000Hz is used.
 
VİEW WN-D63 data sheet

VİEW WN-D63 data sheet

ÖZELLİKLER :

The P Audio WN-D63 is a medium to large (transitional) format compression driver that utilizes a precision formed diaphragm assembly. The diaphragm assembly is close spaced to a close spaced phase plug to insure excellent acoustic loading. The WN-D63 has an operating range of 1500Hz to 20kHz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The large format diaphragm provides excellent acoustic output capacity and very low distortion. The WN-D63 is a neodymium based magnetic system with an industry standard 1.4 inch (35.5mm) exit diameter. The voice coil is precision rectangular wire geometry. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the WN-D63. The diaphragm assembly is a 2.5 inch (63.5mm) diameter treated titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 60 watts of power handling capacity when the crossover frequency is 1800Hz. The WN-D63 is capable of a full 120 watts of power handling capacity when a crossover frequency of greater then 2800Hz is used.
 
VİEW SD-75BF data sheet

VİEW SD-75BF data sheet

ÖZELLİKLER : 

The P Audio SD-75BF is a large format compression driver that utilizes a precision formed diaphragm assembly. The titanium diaphragm is precision formed to insure excellent consistency and performance. The newly developed magnetic circuit has been extensively modeled in order to reduce weight while maintaining very high magnetic gap energy. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-75BF has an operating range of 800Hz to 20kHz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-75BF is a ferrite based magnetic system with an industry standard 1.4 inch (35.5mm) exit diameter. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-75BF. The diaphragm assembly is a 3 inch (76.2mm)diameter commercially pure titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability.The construction yields a full 100 watts of power handling capacity. The larger diaphragm diameter (3 inch) provides superior mid band response and is an excellent choice for high power professional sound reinforcement systems.
 
VİEW SD-63BF-2

VİEW SD-63BF-2

ÖZELLİKLER : 

The P Audio SD-63BF-2 is a ultra medium format compression driver that utilizes a precision formed diaphragm assembly. The titanium diaphragm is precision formed to insure excellent consistency and performance. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-63BF-2 has an operating range of 1000Hz to 20kHz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-63BF-2 is a ferrite based magnetic system with an industry standard 2.0 inch (50.8mm) exit diameter. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-63BF-2. The ferrite magnet design has be extremely weight optimized to provide a very high output to weight ratio. The large throat diameter is an excellent match for high performance large throat horns. The diaphragm assembly is a 2.5 inch(63.7mm) diameter commercially pure titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 80 watts of power handling capacity. The larger diaphragm diameter (2.5 inch) provides superior mid band response and is an excellent choice for medium power professional sound reinforcement systems.
 
VİEW SD-63BF data sheet

VİEW SD-63BF data sheet

ÖZELLİKLER : 

The P Audio SD-63BF-1.4 is a ultra medium format compression driver that utilizes a precision formed diaphragm assembly. The titanium diaphragm is precision formed to insure excellent consistency and performance. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-63BF-1.4 has an operating range of 1000Hz to 20kHz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-63BF-1.4 is a ferrite based magnetic system with an industry standard 1.4 inch (35.5mm) exit diameter. The mounting configuration is a standard bolt onstyle. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-63BF. The ferrite magnet design has be extremely weight optimized to provide a very high output to weight ratio. The diaphragm assembly is a 2.5 inch (63.7mm) diameter commercially pure titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 80 watts of power handling capacity. The larger diaphragm diameter (2.5 inch) provides superior mid band response and is an excellent choice for medium power professional sound reinforcement systems.
 
VİEW SD-26BF data sheet

VİEW SD-26BF data sheet

ÖZELLİKLER : 

The P Audio SD-26BF is a small format compression driver that utilizes a precision formed diaphragm assembly. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-26BF has an operating range of 1800Hz to 20000Hz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-26BF is a ferrite based magnetic system with an industry standard 1 inch (25.4mm) exit diameter. The mounting configuration is a standard bolt onstyle. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-26BF. The diaphragm assembly is a 1 inch (25.4mm) diameter Polyetherimide(PEI) design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 50 watts of power handling capacity.
 
VİEW SD-26BN data sheet

VİEW SD-26BN data sheet

ÖZELLİKLER : 

The P Audio SD-26BN is a small format compression driver that utilizes a precision formed diaphragm assembly. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-26BN has an operating range of 1800Hz to 20000Hz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-26BN is a neodymium based magnetic system with an industry standard 1 inch (25.4mm) exit diameter. The use of neodymium magnetics allows very tight spacing for use in high performance line array designs. The mounting configuration is a standard bolt onstyle. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-26BN. The diaphragm assembly is a 1 inch (25.4mm) diameter Polyetherimide(PEI) design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 50 watts of power handling capacity.
 
VİEW SD-34BF data sheet

VİEW SD-34BF data sheet

ÖZELLİKLER : 

The P Audio SD-34BF is a medium format compression driver that utilizes a precision formed diaphragm assembly. The diaphragm is precision formed to insure excellent consistency and performance. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-34BF has an operating range of 1200Hz to 20000Hz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-34BF is a ferrite based magnetic system with an industry standard 1 inch (25.4mm) exit diameter. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-34BF. The diaphragm assembly is a 1.35 inch (34.4mm) diameter commercially pure titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 30 watts of power handling capacity. The larger diaphragm diameter (1.35 inch) provides superior mid band response and is an excellent choice for medium power sound reinforcement systems.
 
VİEW SD-44BF data sheet

VİEW SD-44BF data sheet

ÖZELLİKLER : 

The P Audio SD-44BF is a medium format compression driver that utilizes a precision formed diaphragm assembly. The titanium diaphragm is precision formed to insure excellent consistency and performance. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-44BF has an operating range of 1200Hz to 20000Hz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-44BF is a ferrite based magnetic system with an industry standard 1 inch (25.4mm) exit diameter. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-44BF. The diaphragm assembly is a 1.75 inch (44.4mm) diameter commercially pure titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 50 watts of power handling capacity. The larger diaphragm diameter (1.75 inch) provides superior mid band response and is an excellent choice for medium power professional sound reinforcement systems
 
VİEW SD-63BN data sheet

VİEW SD-63BN data sheet

ÖZELLİKLER : 

The P Audio SD-63BN is a ultra medium format compression driver that utilizes a precision formed diaphragm assembly. The titanium diaphragm is precision formed to insure excellent consistency and performance. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-63BN has an operating range of 1000Hz to 20000Hz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-63BN is a neodymium based magnetic system with an industry standard 1.4 inch (35.5mm) exit diameter. The mounting configuration is a standard bolt onstyle. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-63BN. The use of neodymium allows the SD-63N to be used in close spaced designs such as modern line array systems. The diaphragm assembly is a 2.5 inch (63.5mm) diameter commercially pure titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 80 watts of power handling capacity. The larger diaphragm diameter (2.5 inch) provides superior mid band response and is an excellent choice for medium power professional sound reinforcement systems.
 
VİEW SD-75BN data sheet

VİEW SD-75BN data sheet

ÖZELLİKLER : 

The P Audio SD-75BN is a large format compression driver that utilizes a precision formed diaphragm assembly. The titanium diaphragm is precision formed to insure excellent consistency and performance. The diaphragm assembly is close spaced to a precision phase plug to insure excellent acoustic loading. The SD-75BN has an operating range of 800Hz to 20000Hz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The SD-75BN is a neodymium based magnetic system with an industry standard 1.4 inch (35.5mm) exit diameter. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the SD-75BN. The neodymium design allows the driver to be used in modern line array designs where close spacing is required. The diaphragm assembly is a 3 inch (76.2mm) diameter commercially pure titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 100 watts of power handling capacity. The larger diaphragm diameter (3 inch) provides superior mid band response and is an excellent choice for medium power professional sound reinforcement systems
 
VİEW PreNeo-750N data sheet

VİEW PreNeo-750N data sheet

ÖZELLİKLER : 

The P Audio PreNeo-750N is a state of the art high output compression driver. Advanced engineering and manufacturing methods have produced an extremely reliable and wide bandwidth device that also features very high fidelity. The PreNeo-750N is a large format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry high temperature aluminum to insure extended high frequency response. The large 2 inch (50mm) throat exit makes the 750N an excellent choice for high sound pressure level performance. This large throat insures low distortion and high intelligibility, particularly thru the critical upper vocal range. High fidelity thru the upper vocal range translates to increased intelligibility and clarity in this critical upper vocal range. This throat diameter is an industry standard for high output vocal range compression drivers and will mate to a variety of P Audio 2 inch throat horns as well as many commercially available high frequency horns. The Neodymium based permanent magnetic system produces a very high efficiency to weight and size ratio. This makes the PreNeo-750N ideal for high level professional touring applications as well as high level fixed installation systems.
 
VİEW PH-2735 data sheet

VİEW PH-2735 data sheet

ÖZELLİKLER : 

The P Audio PH 2735 is a 90 degree by 60 degree nominal high frequency horn that is an ideal choice for use in short to medium throw very high performance sound system designs. The rectangular mouth geometry allows the PH 2735 to be used in narrow profile enclosure designs and in high output monitor configurations. The flat front mouth geometry allows the horn to be used in a wide variety of enclosure profiles. The PH 2735 features nominal included angles of 90 degrees by 60 degrees. These included angles are excellent when system designs require consistent pattern control and wide coverage. In typical applications the 90 degree included angle is used in the horizontal axis and the 60 degree included angle is used in the vertical axis. The design features an industry standard 1 (25mm) diameter bolt on design that will accommodate all of the P Audio high performance 1 bolt on compression drivers and will also mate with a wide variety of industry standard bolt on 1 drivers. The BM-D series bolt on 1 drivers are an ideal match for the PH 2735. The suggested low frequency limit of the horn/driver combination is 1200Hz. Superior beamwidth control is exhibited, particularly in the horizontal axis, when the PH 2735 is used above 1800Hz. The extended bandwidth design allows the horn to be used in two way and three way professional sound reinforcement loudspeaker systems. The PH 2735 is a high impact glass filled ABS design and is fully braced to provide both excellent structural support for the driver and superior mechanical damping. The PH 2735 is an excellent choice for both the P Audio BM-D and PreNeo series high output professional compression drivers that feature 1 bolt on exit geometries.
 
VİEW PA-D120 data sheet

VİEW PA-D120 data sheet

ÖZELLİKLER : 

The P.Audio PA-D120 is a weather resistant mid range and high frequency compression driver designed for general purpose paging applications. The medium format diaphragm assembly features a full 2.6 inch (66 mm) voice coil diameter that provides 100 watts of program power handling. The PA-D120 also offers a sensitivity rating of 109dB. This high sensitivity is coupled to an operating bandwidth of 500Hz to over 5kHz, making the driver ideal for high quality vocal range reinforcement and paging. The PA-D120 uses an industry standard 0.87 inch (22 mm) exit diameter and is a standard screw on mounting configuration. The driver uses a very high output Ferrite based permanent magnet to insure high sensitivity. The PA-D120 features a professional grade Phenolic based diaphragm material and utilizes legendary P Audio high thermal capacity diaphragm assembly design and construction.
 
VİEW PHT-409 data sheet

VİEW PHT-409 data sheet

ÖZELLİKLER :

The P Audio PHT-409 is a small format super tweeter designed for use in two way and three way sound reinforcement designs. The PHT-409 offers extended frequency response to beyond 20 kHz. The high sensitivity of the integrated horn/driver system make the PHT-409 an excellent choice for high frequency reproduction in foreground and background sound reinforcement systems. The 100dB one watt at one meter rating means the product is ideally suited for two way systems where conventional direct radiator tweeters suffer from a loss of sensitivity. The small format 1 inch (25.4mm) diameter diaphragm offers extended bandwidth and extended high frequency piston range performance. This diameter diaphragm is excellent for super tweeter applications or small format upper midrange and super tweeter response. The PHT-409 is constructed from a very rugged glass reinforced ABS resin that offers both a high degree of structural support but also excellent mechanical damping for the device.
 
VİEW PA-D110 data sheet

VİEW PA-D110 data sheet

ÖZELLİKLER : 

The P Audio PA-D110 is a weather resistant mid range and high frequency compression driver designed for general purpose paging applications. The medium format diaphragm assembly features a full 2 inch (50mm) voice coil diameter that provides a full 75 watts of program power handling. The PA-D110 also offers a very high sensitivity rating of 109dB. This high sensitivity is coupled to an operating bandwidth of 200Hz to over 7 kHz, making the driver ideal for high quality vocal range reinforcement and paging. The PA-D110 uses an industry standard 0.87 inch (22mm) exit diameter and is a standard screw on mounting configuration. The driver uses a very high output Ferrite based permanent magnet to insure high sensitivity. The weather resistant performance of the PA-D110 is insured by the use of a highly impregnated phenolic diaphragm assembly.
 
VİEW PA-D65T data sheet

VİEW PA-D65T data sheet

ÖZELLİKLER : 

The P Audio PA-D65T is a medium format diaphragm compression driver designed for high power voice range paging and public address applications. The driver features a 2 inch (50mm) phenolic resin based diaphragm assembly that utilizes P Audio’s legendary high temperature voice coil design. This design produces both very high power handling and very high system reliability. The driver is rated at a full 200 watts of program material. The PA-D65T is supplied with an internal line matching transformer and allows the driver to be used in large distributed system designs. The driver may be used in 150 volt, 100 volt, 70 volt or 50 volt based distributed systems. The driver utilizes a Ferrite based permanent magnet system to produce a high rated sensitivity.
 
 VİEW PA-D50 data sheet

VİEW PA-D50 data sheet

ÖZELLİKLER : 

The P Audio PA-D50 is a weather resistant mid range and high frequency compression driver designed for general purpose paging applications. The medium format diaphragm assembly features a full 2 inch (50mm) voice coil diameter that provides a full 75 watts of program power handling. The PA-D50 also offers a very high sensitivity rating of 109dB. This high sensitivity is coupled to an operating bandwidth of 200Hz to over 7kHz, making the driver ideal for high quality vocal range reinforcement and paging. The PA-D50 uses an industry standard 0.87 inch (22mm) exit diameter and is a standard screw on mounting configuration. The driver uses a very high quality Alnico permanent magnet to insure high sensitivity. The weather resistant performance of the PA-D50 is insured by the use of a highly impregnated phenolic diaphragm assembly.
 
VİEW PA-D38 data sheet

VİEW PA-D38 data sheet

ÖZELLİKLER : 

The P Audio PA-D38 is a small format diaphragm compression driver designed for mid range and extended high frequency applications in two way professional sound reinforcement systems. The small format design is excellent for wide bandwidth applications and is ideal for medium sized sound reinforcement systems using 8 inch (203mm) and 10 inch (254mm) woofers. The driver has a rated bandwidth of 1kHz to beyond 20kHz. This wide bandwidth makes the PA-D38 ideal for many mid range applications as well as wide range ultra high frequency applications. The PA-D38 is a Ferrite based permanent magnet system that features a 1.5 inch (38mm) diameter phenolic inpregnated diaphragm assembly. The driver features a mid band output rating of 105dB with a one watt input measured at one meter. This design features P Audio’s legendary high temperature systems to insure both high power handling and high reliability. The PA-D38 features an industry standard 1 inch screw on style exit that allows the driver to easily mate to any high frequency horn with a standard 1 inch screw on mounting.
 
VİEW PA-DE 34S data sheet

VİEW PA-DE 34S data sheet

ÖZELLİKLER : 

The P Audio PA-DE34S is a small format diaphragm compression driver designed for mid range and extended high frequency applications in two way professional sound reinforcement systems. The small format design is excellent for wide bandwidth applications and is ideal for medium sized sound reinforcement systems using 8 inch (203mm) and 10 inch (254mm) woofers. The driver has a rated bandwidth of 1.2kHz to beyond 20kHz. This wide bandwidth makes the PA-DE34 ideal for many mid range applications as well as wide range ultra high frequency applications. The PA-DE34S is a Ferrite based permanent magnet system that features a 1.35 inch (34.4mm) diameter commercially pure aluminum diaphragm assembly. The driver features a mid band output rating of 105dB with a one watt input measured at one meter. This design features P Audio’s legendary high temperature systems to insure both high power handling and high reliability. The PA-DE34S features an industry standard 1 inch screw on style exit that allows the driver to easily mate to any high frequency horn with a standard 1 inch screw on mounting.
 
VİEW PA-DE 34 diaphragm

VİEW PA-DE 34 diaphragm

ÖZELLİKLER : 

The P Audio PA-DE34 is a small format diaphragm compression driver designed for mid range and extended high frequency applications in two way professional sound reinforcement systems. The small format design is excellent for wide bandwidth applications and is ideal for medium sized sound reinforcement systems using 8 inch 203mm) and 10 inch (254mm) woofers. The driver has a rated bandwidth of 1.2kHz to beyond 20kHz. This wide bandwidth makes the PA-DE34 ideal for many mid range applications as well as wide range ultra high frequency applications. The PA-DE34 is a Ferrite based permanent magnet system that features a 1.35 inch (34.4mm) diameter commercially pure aluminum diaphragm assembly. The driver features a mid band output rating of 105dB with a one watt input measured at one meter. This design features P Audio’s legendary high temperature systems to insure both high power handling and high reliability. The PA-DE34 features an industry standard 1 inch bolt on style exit that allows the driver
 
VİEW PA-D26SPN data sheet

VİEW PA-D26SPN data sheet

ÖZELLİKLER : 

The P Audio PA-D26SPN is a small format diaphragm compression driver designed for mid range and extended high frequency applications in two way professional sound reinforcement systems. The small format design is excellent for wide bandwidth applications and is ideal for medium sized sound reinforcement systems using 8 inch (203mm) and 10 inch (254mm) woofers. The driver has a rated bandwidth of 2kHz to beyond 20kHz. The PA-D26SPN is a Neodymium based permanent magnet system that features a 1.0 inch (25.4mm) diameter polyimide diaphragm assembly. The high output neodymium magnetic system features a mid band sensitivity rating of 110dB. This design features P Audios legendary high temperature systems to insure both high power handling and high reliability. The PA-D26SPN features an industry standard screw on style exit that allows the driver to easily mate to any high frequency horn with a standard 1.0 inch screw on mounting.
 
VİEW PA-D26S data sheet

VİEW PA-D26S data sheet

ÖZELLİKLER : 

The P Audio PA-D26S is a small format diaphragm compression driver designed for mid range and extended high frequency applications in two way professional sound reinforcement systems. The small format design is excellent for wide bandwidth applications and is ideal for medium sized sound reinforcement systems using 8 inch (203mm) and 10 inch (254mm) woofers. The driver has a rated bandwidth of 1.5kHz to beyond 20kHz. The PA-D26S is a Ferrite based permanent magnet system that features a 1 inch (25.4mm) diameter phenolic resin impregnated diaphragm assembly. This design features P Audio’s legendary high temperature systems to insure both high power handling and high reliability. The PA-D26S features an industry standard screw on style exit that allows the driver to easily mate to any high frequency horn with a standard 1 inch screw on mounting.
 
VİEW PA-D25 data sheet

VİEW PA-D25 data sheet

ÖZELLİKLER : 

The P Audio PA-D25 is a small format diaphragm compression driver designed for mid range and extended high frequency applications in two way professional sound reinforcement systems. The small format design is excellent for wide bandwidth applications and is ideal for medium sized sound reinforcement systems using 8 inch (203mm) and 10 inch (254mm) woofers. The driver has a rated bandwidth of 2kHz to beyond 20kHz. The PA-D25 is a Ferrite based permanent magnet system that features a 1 inch (25.4mm) diameter commercially pure titanium diaphragm assembly. The driver features a mid band output rating of 105dB with a one watt input measured at one meter. This design features P Audio’s legendary high temperature systems to insure both high power handling and high reliability. The PA-D25 features an industry standard 1 inch screw on style exit that allows the driver to easily mate to any high frequency horn with a standard 1 inch screw on mounting.
 
VİEW CL-WG data sheet

VİEW CL-WG data sheet

ÖZELLİKLER : 

The P Audio CL-WG is a 90 degree included horizontal angle wave guide (WG) designed to be used with the P Audio CL35 and CL25 line array converging lens devices. The CL-WG will mount directly to either the CL35 or the CL25 and has been designed to provide both wide band acoustic loading and directivity control for the high frequency section of any professional line array system. The straight wall geometry will provide constant directivity pattern control in the horizontal plane. Vertical pattern control and the consequent vertical included angle is determined by the number of CL-WG devices in a vertical orientation. The CL-WG is a rugged aluminum die cast design and has been designed to allow multiple wave guides to be configured in a vertical stack. The CL-WG is a very high performance directivity control device and is an excellent solution for both small format and large format professional line array systems.
 
VİEW PH-CL25 data sheet

VİEW PH-CL25 data sheet

ÖZELLİKLER : 

The P Audio PH-CL25 (Converging Lens) is a high frequency wave guide designed for use in line array sound reinforcement systems or whenever planar wave-fronts are required. The PH-CL25 is ideally mated to the P Audio BM-D Series and PreNeo Series professional compression drivers that feature 1.0 exit diameters. The PH-CL25 is also designed to couple to any industry standard 1.0 (25.4mm) exit compression driver. The PH-CL25 will accommodate compression driver major outside diameters up to 170mm (6.69) and will allow vertical stacking of multiple PH-CL25 wave guides while still maintaining excellent wavelength spacing. The PH-CL25 is a converging acoustic lens design that achieves excellent time coherence over the entire front of the wave guide mouth. This converging acoustic lens design acts to convert the naturally diverging spherical wave front found in typical wave guides to a more planar, time coherent wave front suitable for use in large format or arrayed linear geometry loudspeaker system designs. The physical design of the horizontal exit width allows for the addition of customer configured horizontal radiation control boundaries of up to 120 degrees. The addition of simple mounting holes in the front flanges allow the customer supplied control boundary (horn) to be easily mounted to the PH-CL25. The recommended low frequency limit of the device is 1000Hz. Although the flare rate of the device is a lower frequency, 1500Hz is recommended to provide both good loading and reliability to the selected compression driver. The PH-CL25 is a rugged die cast aluminum design that will accommodate both light weight neodymium based compression drivers as well as large diameter ferrite based drivers. The PH-CL25 is an excellent high frequency addition for conventional two way and three way single enclosure designs and can be easily combined to all the use of two large format 1.0 compression drivers in a single larger three way professional audio line array design. P Audio also offers a secondary waveguide for use with the PH-CL25. The PH-WG is an accessory designed to generate a secondary 90 degree included angle in the horizontal plane and will provide excellent horizontal polar control for the PH-CL25 and compression driver.
 
VİEW CL-35BMD data sheet

VİEW CL-35BMD data sheet

ÖZELLİKLER : 

The P Audio CL35-PreNeo is a high frequency wave guide coupled to a PreNeo-740N high output compression driver. The converging lens wave guide and compression driver are designed for use in line array sound reinforcement systems or whenever planar wave-fronts are required. The CL35- PreNeo produces extremely coherent output with a rated frequency range of 1000Hz to 16kHz. The CL35-PreNeo may be used as a single device in planar front sound reinforcement systems or be stacked vertically in a two high configuration for very high output line array system designs. Applications information may be found in the P Audio white paper titled CL Wave Guide Applications in the High Frequency section of the P Audio web site. (www.paudiothailand.com). This white paper describes basic 90 degree and 120 degree horizontal pattern control configurations typical in modern line array system designs. The CL35-PreNeo is a converging acoustic lens design that achieves excellent time coherence over the entire front of the wave guide mouth. This converging acoustic lens design acts to convert the naturally diverging spherical wave fronts found in typical wave guides to a more planar, time coherent wave front suitable for use in large format or arrayed linear geometry loudspeaker system designs. The physical design of the horizontal exit width allows for the addition of customer configured horizontal radiation control boundaries of up to 120 degrees. The addition of simple mounting holes in the front flanges allow the customer supplied control boundary (horn) to be easily mounted to the CL35-PreNeo. The recommended low frequency limit of the device is 1000Hz. Although the flare rate of the device is a lower frequency, 1000Hz is recommended to provide both good loading and reliability to the selected compression driver. The CL35-PreNeo is a rugged die cast aluminum design that couples to the large format neodymium based PreNeo-740N. The CL35-PreNeo is an excellent high frequency addition for conventional two way and three way single enclosure designs and can be easily combined to stack in multiple vertical configurations. The edge to edge physical spacing of the wave guide allow for superior coupling at very high frequencies.
 
VİEW PA-D120N data sheet

VİEW PA-D120N data sheet

ÖZELLİKLER : 

The P.Audio PA-D120N is a weather resistant mid range and high frequency compression driver designed for general purpose paging applications. The design features a high output Neodymium Iron Boron permanent magnet system to insure high sensitivity. The medium format diaphragm assembly features a full 2.6 inch (66mm) voice coil diameter that provides 120 watts of program power handling. The PA-D120N also offers a sensitivity rating of 110dB. This high sensitivity is coupled to an operating bandwidth of 500Hz to over 7kHz making the driver ideal for high quality vocal range reinforcement and paging. The PA-D120N uses an industry standard 0.87 inch (22mm) exit diameter and is a standard screw on mounting configuration. The PA-D120N features a professional grade Prenolic based diaphragm material and utilizes legendary P Audio high thermal capacity diaphragm assembly design and construction.
 
VİEW BM-D450S data sheet

VİEW BM-D450S data sheet

ÖZELLİKLER :

The P Audio has redefined its BM series of compression drivers. The BM-D450S is a state of the art high output compression driver. New developments P Audio Research and Development have produced new levels of performance. State of the art manufacturing methods insure extremely reliable and consistent designs. The new BM-D450S driver utilizes the recently developed CRT technology to substantially improve both the time domain response and reduce distortion through the critical upper vocal range (1.5kHz to 5kHz). This new technology, called Cavity Resonance Technology  (CRT) acts to acoustically minimize the cavity found under all suspension driver suspension elements. By employing CRT technology, P Audio engineers have been able to greatly improve the vocal accuracy in the frequency range where vocal intelligibility is located. Magnetic fluid has also been added to increase thermal transfer and mechanical damping. These changes to the diaphragm and magnet structure assembly have also increased the sound pressure levels and smoothed the response between 10kHz and 20kHz. The result is a more accurate system, particularly for vocal range program material. The BM-D450S is a medium format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry, high temperature aluminum to insure extended high frequency response. This diaphragm geometry is ideally suited for foreground/background high performance pa systems. The 1.0 inch (25.4mm) throat exit makes the 450S an excellent choice for extended bandwidth and ultra high frequency applications such as three way designs. The BM-D450S is ideally suited for line array applications or other applications where a mid bass horn or direct radiator driver is also used. This medium format throat and medium format diaphragm insures wide dispersion at very high frequencies and is an excellent choice for three way systems or medium power two way designs. The 1.0 inch throat is compatible with a variety of P Audio horns and also compatible with industry standard 1.0 inch screw/thread on horns. The Ferrite based permanent magnetic system produces a very high efficiency and value. This makes the BM-D450S ideal for professional applications as well as fixed installation systems. The large format Ferrite permanent magnet produces a very high conversion efficiency.
 
VİEW PHT-413 data sheet

VİEW PHT-413 data sheet

ÖZELLİKLER :

The PHT-413 is a horn loaded super tweeter designed for use in three way systems or small background two way designs. The PHT-413 offers a very high sensitivity of 105dB SPL at one watt and one meter. This makes the system an excellent choice over conventional direct radiator tweeter designs when high acoustic output is required without a loss in operating bandwidth. The PHT-413 offers extended response to beyond 20kHz.This makes the system a true super tweeter and, combined with the high, professional level, output capability mean the PHT-413 can be used in many applications where direct radiator high frequency devices are not capable. The high frequency horn is a rugged ABS resin with additional glass filling for both structural integrity and mechanical damping. The 1 inch diameter (25.4mm) diaphragm assembly and P Audio designed assembly methods make the device and excellent choice for high fidelity music systems in restaurants, pubs and retail spaces. The small format and small physical size of the PHT-413 make this device excellent for applications in very compact two way designs where the low frequency transducer is an 8 inch or 10 inch professional loudspeaker
 
CS-6CFT

CS-6CFT

The CS-6CFT is a coaxial high performance ceiling loudspeaker system. The design features an overall outside diameter of 8.97 inches (227mm) and utilizes a nominal 6 inch (152mm) low frequency woofer. The coaxially mounted high frequency transducer insures clean upper range vocal performance and extended high frequency response. The CS-6CFT features a 30 watt program power rating, making the system ideal for standard ceiling heights. The CS-6CFT has a rated frequency response of 65Hz to beyond 20 kHz, making the product an ideal choice for high performance, high fidelity background music systems and general paging systems. The unit is equipped with a wide bandwidth line matching transformer for large scale distributed installations. The power taps are 10 watts, 5 watts, and 2.5 watts. The CS-6CFT exhibits wide bandwidth and has a rated frequency response of 65Hz to 20 kHz. The CS-6CFT has an integral mounting system that will accommodate a wide variety of ceiling materials and dimensions
 
CS-6CF

CS-6CF

The CS-6CF is a coaxial high performance ceiling loudspeaker system. The design features an overall outside diameter of 8.97 inches (227mm) and utilizes a nominal 6 inch (152mm) low frequency woofer. The coaxially mounted high frequency transducer insures clean upper range vocal performance and extended high frequency response. The CS-6CF features a 30 watt program power rating, making the system ideal for standard ceiling heights. The CS-6CF has a rated frequency response of 65Hz to beyond 20 kHz, making the product an ideal choice for high performance, high fidelity background music systems and general paging systems. The CS-6CF has an integral mounting system that will accommodate a wide variety of ceiling materials and dimensions. Frequency Response
 
CS-8F

CS-8F

The CS-8F is a high output ceiling loudspeaker designed for medium to high ceiling applications. This full range design features an 8 inch (203mm) diameter woofer. The overall outside diameter of the system is 10.7 inches (272mm) This CS-8F produces broad frequency response with a low frequency limit of 65Hz. The high frequency response extends to beyond 20 kHz, making the CS-8F ideal for reproduction of wide band background music and speech signals. The CS-8F features a full 20 watts of program power handling capacity. This power handling capacity, coupled with P Audio’s reputation for high reliability, make the CS-8F and excellent system for restaurant, pub, retail spaces and office ceiling systems. The CS-8F has an integral mounting system that provides easy and quick system installation.
 
CS-8CF

CS-8CF

The CS-8CF is a high output coaxial ceiling loudspeaker designed for medium to high ceiling applications. The two way design features an 8 inch (203mm) diameter woofer and a coaxially mounted high frequency transducer. The overall outside diameter of the system is 10.7 inches (272mm) this combination provides broad frequency response with a low frequency limit of 65Hz. The high frequency response extends to beyond 20 kHz, making the CS-8CF ideal for reproduction of wide band high fidelity signals. The CS-8CF features a full 35 watts of program power handling capacity. This power handling capacity, coupled with P Audio’s reputation for high reliability, make the CS-8CF and excellent system for restaurant, pub, retail spaces and office ceiling systems. The CS-8CF has an integral mounting system that provides easy and quick system installation.
 
VİEW WN-D72 data sheet

VİEW WN-D72 data sheet

ÖZELLİKLER :

The P Audio WN-D72 is a large format compression driver that utilizes a precision formed diaphragm assembly. The diaphragm assembly is close spaced to a close spaced phase plug to insure excellent acoustic loading. The WN-D72 has an operating range of 1500Hz to 20kHz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The large format diaphragm provides excellent acoustic output capacity and very low distortion. The WN-D72 is a neodymium based magnetic system with an industry standard 2 inch (50.8mm) exit diameter. The voice coil is precision rectangular wire geometry. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the WN-D72. The diaphragm assembly is a 2.84 inch (72.1mm) diameter treated titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 100 watts of power handling capacity when the crossover frequency is 1500Hz. The WN-D72 is capable of a full 200 watts of power handling capacity when a crossover frequency of greater then 2500Hz is used.
 
VİEW PreNeo-450N data sheet

VİEW PreNeo-450N data sheet

ÖZELLİKLER :

The P Audio PreNeo-450N is a state of the art high output compression driver. Advanced engineering and manufacturing methods have produced an extremely reliable and wide bandwidth device that also features very high fidelity. The new PreNeo-450N driver utilizes the recently developed CRT  technology to substantially improve both the time domain response and reduce distortion through the critical upper vocal range (1.5kHz to 5kHz). This new technology, called Cavity Resonance Technology  (CRT) acts to acoustically minimize the cavity found under all suspension driver suspension elements. By employing CRT technology, P Audio engineers have been able to greatly improve the vocal accuracy in the frequency range where vocal intelligibility is located. Magnetic fluid has also been added to increase thermal transfer and mechanical damping. These changes to the diaphragm and magnet structure assembly have also increased the sound pressure levels and smoothed the response between 10kHz and 20kHz. The result is a more accurate system, particularly for vocal range program material. The PreNeo-450N is a medium format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry high temperature aluminum to insure extended high frequency response. The 1.0 inch (25.4mm) throat exit makes the 450N an excellent choice for extended bandwidth and ultra high frequency applications such as three way designs. The PreNeo-450N is ideally suited for line array applications or other applications where a mid bass horn or direct radiator driver is also used. This small format throat insures wide dispersion at very high frequencies and is an excellent choice for three way systems or medium power two way designs. The 1.0 inch throat is compatible with a variety of P Audio horns and also compatible with industry standard 1.0 inch bolt on horns. The Neodymium based permanent magnetic system produces a very high efficiency to weight and size ratio. This makes the PreNeo-450N ideal for professional applications as well as fixed installation systems. The medium format Neodymium-Iron-Boron permanent magnet produces a remarkably high conversion efficiency.
 
VİEW PreNeo -340S

VİEW PreNeo -340S

ÖZELLİKLER :

The P Audio PreNeo-340S is a state of the art high output compression driver. Advanced engineering and manufacturing methods have produced an extremely reliable and wide bandwidth device that also features very high fidelity. The PreNeo-340S is a small format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry, high temperature aluminum to insure extended high frequency response. This diaphragm geometry is ideally suited for foreground/background high performance pa systems. The 1.0 inch (25.4mm) throat exit makes the 340S an excellent choice for extended bandwidth and ultra high frequency applications such as three way designs. The PreNeo-340S is ideally suited for line array applications or other applications where a mid bass horn or direct radiator driver is also used. This small format throat and small format diaphragm insures wide dispersion at very high frequencies and is an excellent choice for three way systems or medium power two way designs. The 1.0 inch throat is compatible with a variety of P Audio horns and also compatible with industry standard 1.0 inch screw/threaded on horns. The Neodymium based permanent magnetic system produces a very high efficiency to weight and size ratio. This makes the PreNeo-340S ideal for professional applications as well as fixed installation systems. The medium format Neodymium-Iron-Boron permanent magnet produces remarkably high conversion efficiency.
 
VİEW PreNeo-740N data sheet

VİEW PreNeo-740N data sheet

ÖZELLİKLER :

The P Audio PreNeo-740N is a state of the art high output compression driver. Advanced engineering and manufacturing methods have produced an extremely reliable and wide bandwidth device that also features very high fidelity. The PreNeo-740N is a large format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry high temperature aluminum to insure extended high frequency response. The large 1.4 inch (35.5mm) throat exit makes the 740N an excellent choice for extended bandwidth and high sound pressure level performance. This medium format throat insures low distortion and high intelligibility and is an industry standard for professional audio applications. This throat diameter has become an industry reference when combined low distortion and extended bandwidth are required. The 1.4 inch diameter throat insures wide dispersion at high frequencies. The 1.4 inch throat is compatible with a variety of P Audio horns and also compatible with industry standard 1.4 inch bolt on horns. The Neodymium based permanent magnetic system produces a very high efficiency to weight and size ratio. This makes the PreNeo-740N ideal for high level professional touring applications as well as high level fixed installation systems. The large Neodymium-Iron-Boron permanent magnet produces a remarkably high conversion efficiency
 
VİEW BM-D446 data sheet

VİEW BM-D446 data sheet

ÖZELLİKLER :

The P Audio philosophy of continuous improvement requires constant research and development efforts aimed at upgrading critical performance parameters. The BM-D 446 high performance compression driver presents many improvements in both amplitude and time domain response. These technological advances represent additional improvements in the very successful BM-D series of high performance compression drivers. The BM-D 446 magnet gap geometry has been redesigned to improve both the time domain and amplitude domain response in the critical upper vocal range between1kHz and 3kHz. These performance improvements translate into superior vocal range intelligibility and clarity. Additional improvements in the phase plug spacing and rear volume have yielded substantial improvements in the10kHz range that translate into superior ultra high frequency accuracy. The BM-D 446 is ideal for use in high output two way professional audio system designs. The driver may be integrated into systems utilizing 8 inch (203 mm) high output woofer or larger and is ideal for very high performance systems using 12 inch (305 mm) and 15 inch (381mm) low frequency sections. The rated frequency range of the BM-D 446 driver is1kHz to 20kHz. Passive crossovers with 2nd order (12dB/Oct) or higher slopes will produce ideal band limiting and crossover frequencies of higher then 1kHz are recommended for very high output designs. The BM-D 446 utilizes a 1.75 inch (44.5mm) diaphragm assembly of commercially pure titanium. The diaphragm assembly features P Audio
 
VİEW BM-D26S data sheet

VİEW BM-D26S data sheet

ÖZELLİKLER :

BM-D26S The P Audio BM-D26S is a 1 inch (25.4mm) small format diaphragm compression driver coupled to a high density magnetic circuit. The compression driver exit diameter is an industry standard 1 inch (25.4mm).The BM-D26S combines high magnetic field strength and a very lightweight diaphragm assembly, producing a very high output device that also features extended bandwidth and well defined frequency response. The BM-D26S is optimized for very high perfor- mance two way system designs as well as three way designs fea- turing bass, mid bass, and ultra high frequency transducers. The driver has a rated low frequency response limit of 1.5kHz and fea- tures extended response to beyond 2kHz. The BM-D26S is a Ferrite based magnetic system with an FEA (Finite Element Analysis) modeled magnetic circuit designed to yield very high magnetic density and high acoustic conversion efficiency. The light weight diaphragm design and optimized geometry insure ex- tended response and very high acoustic output capability in the mid range. The diaphragm assembly features P Audio
 
VİEW BM-D26 data sheet

VİEW BM-D26 data sheet

ÖZELLİKLER :

BM-D26 The P Audio BM-D26 is a 1 inch (25.4mm) small format diaphragm compression driver coupled to a high density magnetic circuit. The compression driver exit diameter is an industry standard 1 inch (25.4 mm). The BM-D26 combines high magnetic field strength and a very lightweight diaphragm assembly, producing a very high output device that also features extended bandwidth and well defined frequency response. The BM-D26 is optimized for very high performance two way system designs as well as three way designs featuring bass, mid bass, and ultra high frequency transducers. The driver has a rated low fre- quency response limit of 1.5kHz and features extended response to beyond 2kHz. The BM-D26 is a Ferrite based magnetic system with an FEA (Finite Element Analysis) modeled magnetic circuit designed to yield very high magnetic density and high acoustic conversion efficiency. The light- weight diaphragm design and optimized geometry insure extended response The BM-D26 features an industry standard bolt-on style mounting system that is ideally mated to all P Audio PH series high frequency horns as well as any industry standard high frequency horn that can accommodate a standard 1 inch 
 
CS-6FT

CS-6FT

The P Audio CS-6FT is a nominal 6 inch (153mm) diameter full range ceiling loudspeaker system. The overall outside diameter of the system is 8.97 inches (227mm).The CS-6FT offers a full 15 watts of program power handling, making the system ideal for medium height ceiling installations. The unit is equipped with a wide bandwidth line matching transformer for large scale distributed installations. The power taps are 10 watts, 5 watts, and 2.5 watts. The CS-6FT exhibits wide bandwidth and has a rated frequency response of 80Hz to 20 kHz. The CS-6FT was designed for background music systems as well as vocal range reproduction. The CS-6FT has an integral mounting system that will accommodate a variety of ceiling materials and dimensions.
 
VİEW BM-D440S data sheet

VİEW BM-D440S data sheet

ÖZELLİKLER :

The P Audio has redefined its BM series of compression drivers. The BMD440S is a state of the art high output compression driver. New developments P Audio Research and Development have produced new levels of performance. State of the art manufacturing methods insure extremely reliable and consistent designs. The new BM-D440S driver utilizes the recently developed CRT technology to substantially improve both the time domain response and reduce distortion through the critical upper vocal range (1.5 kHz to 5kHz). This new technology, called Cavity Resonance Technology   (CRT) acts to acoustically minimize the cavity found under all suspension driver suspension elements. By employing CRT technology, P Audio engineers have been able to greatly improve the vocal accuracy in the frequency range where vocal intelligibility is located. Magnetic fluid has also been added to increase thermal transfer and mechanical damping. These changes to the diaphragm and magnet structure assembly have also increased the sound pressure levels and smoothed the response between 10 kHz and 20 kHz. The result is a more accurate system, particularly for vocal range program material. The BM-D440S is a medium format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry, high temperature aluminum to insure extended high frequency response. This diaphragm geometry is ideally suited for foreground/background high performance pa systems. The 1.0 inch (25.4mm) throat exit makes the 440S an excellent choice for extended bandwidth and ultra high frequency applications such as three way designs. The BM-D440S is ideally suited for line array applications or other applications where a mid bass horn or direct radiator driver is also used. This medium format throat and medium format diaphragm insures wide dispersion at very high frequencies and is an excellent choice for three way systems or medium power two way designs. The 1.0 inch throat is compatible with a variety of P Audio horns and also compatible with industry standard 1.0 inch screw/threaded on horns. The Ferrite based permanent magnetic system produces a very high efficiency and value. This makes the BM-D440S ideal for professional applications as well as fixed installation systems. The medium format Ferrite permanent magnet produces a very high conversion efficiency.

 
CS-5CF

CS-5CF

The CS-5CF and CS-5CFT are 5 inch (127mm) high performance coaxial ceiling speakers. Coaxial designs offer superior vocal range intelligibility as well as extended high frequency response. The overall outside diameter of the system is 7.95 inches (202mm). The CS-5CF produces a rated bandwidth of 70Hz to beyond 20 kHz. This extended response allows the system to be used for high fidelity full range program material. The coaxial system is rated for a full 25 watts of program material and also provides excellent long term reliability. The CS-5CFT is equipped with a wide bandwidth line matching transformer. The transformer offers power taps of 10 watts, 5 watts, and 2.5 watts, making the unit and excellent choice for larger distributed paging and background music systems. Both the CS-5CF and CS-5CFT have an integral mounting system that will accommodate a variety of ceiling materials and dimensions. The CS-5 family is well suited for medium format acoustic spaces with average ceiling heights. The Coaxial design allows the CS-5 loudspeakers to be specified for both high fidelity background music systems and paging systems where high levels of intelligibility are required.
 
VİEW BM-D450 data sheet

VİEW BM-D450 data sheet

ÖZELLİKLER :

The P Audio has redefined its BM series of compression drivers. The BM-D450 is a state of the art high output compression driver. New developments P Audio Research and Development have produced new levels of performance. State of the art manufacturing methods insure extremely reliable and consistent designs. The new BM-D450 driver utilizes the recently developed CRT™ technology to substantially improve both the time domain response and reduce distortion through the critical upper vocal range (1.5kHz to 5kHz). This new technology, called Cavity Resonance Technology ™ (CRT) acts to acoustically minimize the cavity found under all suspension driver suspension elements. By employing CRT technology, P Audio engineers have been able to greatly improve the vocal accuracy in the frequency range where vocal intelligibility is located. Magnetic fluid has also been added to increase thermal transfer and mechanical damping. These changes to the diaphragm and magnet structure assembly have also increased the sound pressure levels and smoothed the response between 10kHz and 20kHz. The result is a more accurate system, particularly for vocal range program material. The BM-D450 is a medium format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry, high temperature aluminum to insure extended high frequency response. This diaphragm geometry is ideally suited for foreground/background high performance pa systems. The 1.0 inch (25.4mm) throat exit makes the 450 an excellent choice for extended bandwidth and ultra high frequency applications such as three way designs. The BM-D450 is ideally suited for line array applications or other applications where a mid bass horn or direct radiator driver is also used. This medium format throat and medium format diaphragm insures wide dispersion at very high frequencies and is an excellent choice for three way systems or medium power two way designs. The 1.0 inch throat is compatible with a variety of P Audio horns and also compatible with industry standard 1.0 inch bolt on horns. The Ferrite based permanent magnetic system produces a very high efficiency and value. This makes the BM-D450 ideal for professional applications as well as fixed installation systems. The large format Ferrite permanent magnet produces a very high conversion efficiency.
 
VİEW BM-D740 data sheet

VİEW BM-D740 data sheet

ÖZELLİKLER :

The P Audio BM-D740 is a state of the art high output compression driver. Advanced engineering and manufacturing methods have produced an extremely reliable and wide bandwidth device that also features very high fidelity. The BM-D740 is a large format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry high temperature aluminum to insure extended high frequency response. The large 1.4 inch (35.5mm) throat exit makes the 740 an excellent choice for extended bandwidth and high sound pressure level performance. This medium format throat insures low distortion and high intelligibility and is an industry standard for professional audio applications. This throat diameter has become an industry reference when combined low distortion and extended bandwidth are required. The 1.4 inch diameter throat insures wide dispersion at high frequencies. The 1.4 inch throat is compatible with a variety of P Audio horns and also compatible with industry standard 1.4 inch bolt on horns. The Ferrite based permanent magnetic system produces a very high efficiency. This makes the BM-D740 ideal for high level professional touring applications as well as high level fixed installation systems. The large Ferrite permanent magnet produces remarkably high conversion efficiency.
 
VİEW BM-D750 data sheet

VİEW BM-D750 data sheet

ÖZELLİKLER :

The P Audio BM-D750 is a state of the art high output compression driver. Advanced engineering and manufacturing methods have produced an extremely reliable and wide bandwidth device that also features very high fidelity. The BM-D750 is a large format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry high temperature aluminum to insure extended high frequency response. The large 2 inch (51mm) throat exit makes the 750 an excellent choice for high sound pressure level performance. This large throat insures low distortion and high intelligibility, particularly thru the critical upper vocal range. High fidelity thru the upper vocal range translates to increased intelligibility and clarity in this critical upper vocal range. This throat diameter is an industry standard for high output vocal range compression drivers and will mate to a variety of P Audio 2 inch throat horns as well as many commercially available high frequency horns. The Ferrite based permanent magnetic system produces a very high efficiency to weight and size ratio. This makes the BM-D750 ideal for high level professional touring applications as well as high level fixed installation systems
 
VİEW AM-18LF data sheet

VİEW AM-18LF data sheet

ÖZELLİKLER :

The AM Series represents a very high value for professional loudspeaker products. The AM-18LF is an 18 inch (460mm) diameter low frequency transducer that features a heavy duty die cast aluminum chassis and a high output Ferrite based permanent magnetic system. The AM-18LF has been optimized for use between 30Hz and 125Hz and is capable of very high acoustic output in this frequency band. Both the efficiency and the bandwidth have been tailored to professional sub woofer applications. The efficiency bandwidth product will produce the clean and tight bass response required for truly professional applications. The AM-18LF features a 3 inch (76.2mm) diameter edge wound aluminum voice coil with winding parameters ideally matched to mechanical suspension system. This combination of voice coil length and suspension design will provide professional level linear excursion. The high thermal capacity adhesives and voice coil construction provide both high power handling and very high reliability. The AM-18LF has been designed for sub bass and sub woofer applications in portable touring systems as well as mobile DJ and dance club environments. The advanced design and manufacturing processes at P Audio make the AM-18LF a very reliable and high performance device.
 
VİEW AM-18ELF data sheet

VİEW AM-18ELF data sheet

ÖZELLİKLER :

The AM Series features an 18 inch (460mm) diameter loudspeaker designed for extended deep bass and sub woofer applications. The design parameters of the AM-18ELF produce a transducer with a rated bandwidth of 30Hz to 100Hz. Extended voice coil winding length , lower free air resonance and a suspension system capable of increased displacement produce a loudspeaker capable of clean and tight response down to 30Hz. The AM-18ELF utilizes a Ferrite based permanent magnetic design and a medium format 3 inch (76.2mm) voice coil to generate an efficiency bandwidth product that provides a perfect combination of low frequency extension and acoustic output. The AM-18ELF is ideal for sub bass effects and for any application where ultra low frequency response is specified. The AM-18ELF offers all of the power handling and system reliability required for both portable ultra low frequency effects as well as for installed systems such as dance clubs.Deep sub bass response requires transducers designed for this specific application. The AM-18ELF has been optimized for very low frequency operation through the use of advanced computer based design and modeling software.
 
VİEW AM-15LF data sheet

VİEW AM-15LF data sheet

ÖZELLİKLER :

The AM-15LF is a 15 inch (389mm) diameter loudspeaker designed for use in two way and three way professional sound reinforcement and public address systems. The AM-15LF features a Ferrite based permanent magnet design coupled to an aluminum die cast chassis. The AM Series design uses an extremely reliable 3 inch (76.2mm) voice coil design that utilizes state of the art construction processes. The voice coil is an edge wound aluminum based wire that uses rectangular geometry to achieve very high electro-magnetic conversion efficiency. The AM uses a newly developed cone material that features high internal mechanical damping. This cone design provides for very intelligible mid band response as well as superb vocal range clarity. The AM-15LF was designed to operate in the 45Hz to 1500Hz range. The performance and reliability of this design make it an excellent choice for systems that require long term operation and consistency. Because of its high performance and high efficiency, the AM-15LF may be used as the low frequency device when high output and high efficiency compression drivers and horns are used for the high frequency section of a professional sound reinforcement system.
 
VİEW AM-12MB data sheet

VİEW AM-12MB data sheet

ÖZELLİKLER :

The AM-12MB is designed to be used in two way sound reinforcement systems. The 12 inch (314mm) diameter chassis is ideal when used as the bass and mid section of a two way system where a compression driver and horn combination provide the upper mid and high frequency radiation. The AM-12MB is a die cast aluminum chassis the uses a high output Ferrite based magnetic structure. The 3 inch (76.2mm) diameter voice coil uses edge wound rectangular aluminum wire that offers very high thermal capacity and high system power handling. The AM-12MB is designed for operation between 60Hz and 2500Hz. This frequency range is well suited for modern high efficiency sound system designs. A new cone material has been developed to improve time domain response thru the critical vocal range. This new cone material increases internal mechanical damping and improves upper vocal intelligibility. The combination of Ferrite magnetics and medium format voice coil design make the AM-12MB a very high output to value device. Because the AM-12MB is well suited for many sound reinforcement and public address applications it will find it way into many professional systems. Advanced product design, featuring computer based analysis and modeling insure that the AM-12MB is optimized for its application in two way systems.
 
VİEW AM-12LF data sheet

VİEW AM-12LF data sheet

ÖZELLİKLER :

The AM-12LF is designed to be used in two way sound reinforcement systems. The 12 inch (314mm) diameter chassis is ideal when used as the bass and mid section of a two way system where a compression driver and horn combination provide the upper mid and high frequency radiation. The AM-12LF is a die cast aluminum chassis the uses a high output Ferrite based magnetic structure. The 3 inch (76.2mm) diameter voice coil uses edge wound rectangular aluminum wire that offers very high thermal capacity and high system power handling. The AM-12LF is designed for operation between 60Hz and 2500Hz. This frequency range is well suited for modern high efficiency sound system designs. A new cone material has been developed to improve time domain response thru the critical vocal range. This new cone material increases internal mechanical damping and improves upper vocal intelligibility. The combination of Ferrite magnetics and medium format voice coil design make the AM-12LF a very high output to value device. Because the AM-12LF is well suited for many sound reinforcement and public address applications it will find it way into many professional systems. Advanced product design, featuring computer based analysis and modeling insure that the AM-12LF is optimized for its application in two way systems.
 
VİEW SN-8MB data sheet

VİEW SN-8MB data sheet

ÖZELLİKLER :

When very compact and light weight loudspeaker systems are required the SN-8MB is an ideal design. Like all SN Series II designs, the SN-8MB was designed for a specific application. This 8 inch (213mm) diameter loudspeaker is ideal for applications where a very portable system or small enclosure size is specified. It is ideal for light weight two way compact systems and also ideally suited as a very high output small format mid bass driver in three way systems. Like all loudspeakers in the SN Series II family, the SN 8MB features a Neodymium based permanent magnetic system mounted to a die cast aluminum chassis. This 8 inch design features a 2 inch diameter (50.8mm) voice coil design. The voice coil diameter is large compared to the cone diameter and this voice coil diameter insures high reliability and high power handling. The operating bandwidth is 60Hz to 2000Hz. This response range is optimized for two way system designs for both small format sound reinforcement and installed public address designs. The SN-8MB is also an ideal for high performance direct radiator and horn loaded mid bass designs. When used from 150Hz to 2000Hz, this design can provide superb mid band and vocal band performance levels. The new cone material provides a very high degree of vocal clarity and intelligibility.
 
VİEW SN8-250N data sheet

VİEW SN8-250N data sheet

ÖZELLİKLER :

The P Audio SN8-250CX is a high performance coaxial transducer. The SN8-250CX is an upgraded design that features many of P Audios new technologies and performance upgrades. The low frequency section utilizes a large diameter voice coil design while the high frequency section employs a medium format titanium diaphragm assembly. The 8 inch (203mm)diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN8-250CX has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 20000Hz. The SN8-250CX features a large 2.38 inch (60.5mm) diameter voice coil that provides an AES rated 250 watts of continuous power handling and a full 1000 watts of peak rated power handling when sufficient amplifier headroom is available. The SN8-250CX employs P Audios under damper venting to control turbulent air flow. The voice coil design is a bobbin wound geometry with P Audios flat wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The high frequency section is a close spaced titanium diaphragm assembly. The diaphragm is a 1.34 inch (34mm) diaphragm that provides excellent high frequency response and superior power handling and durability. The horn loading is a thru pole piece design. The overall high frequency design provides very high sensitivity. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
 VİEW SN8-250CX data sheet

VİEW SN8-250CX data sheet

ÖZELLİKLER :

The P Audio SN8-250CX is a high performance coaxial transducer. The SN8-250CX is an upgraded design that features many of P Audios new technologies and performance upgrades. The low frequency section utilizes a large diameter voice coil design while the high frequency section employs a medium format titanium diaphragm assembly. The 8 inch (203mm)diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN8-250CX has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 20000Hz. The SN8-250CX features a large 2.38 inch (60.5mm) diameter voice coil that provides an AES rated 250 watts of continuous power handling and a full 1000 watts of peak rated power handling when sufficient amplifier headroom is available. The SN8-250CX employs P Audios under damper venting to control turbulent air flow. The voice coil design is a bobbin wound geometry with P Audios flat wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The high frequency section is a close spaced titanium diaphragm assembly. The diaphragm is a 1.34 inch (34mm) diaphragm that provides excellent high frequency response and superior power handling and durability. The horn loading is a thru pole piece design. The overall high frequency design provides very high sensitivity. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
VİEW WN-D34 data sheet

VİEW WN-D34 data sheet

ÖZELLİKLER :

The P Audio WN-D34 is a small to medium format (transitional) compression driver that utilizes a precision formed diaphragm assembly. The diaphragm assembly is close spaced to a close spaced phase plug to insure excellent acoustic loading. The WN-D34 has an operating range of 2000Hz to 20kHz and is ideally suited for two way and three way high frequency applications in professional sound reinforcement systems. The large format diaphragm provides excellent acoustic output capacity and very low distortion. The WN-D34 is a neodymium based magnetic system with an industry standard 1.0 inch (25.4mm) exit diameter. The voice coil is precision rectangular wire geometry. The mounting configuration is a standard bolt on style. P Audio offers a wide variety high frequency horns that will provide excellent pattern control and acoustic loading for the WN-D34. The diaphragm assembly is a 1.35 inch (34.2mm) diameter treated titanium design and utilizes P Audios very high temperature adhesive systems and precision manufacturing to insure high power handling and reliability. The construction yields a full 20 watts of power handling capacity when the crossover frequency is 2500Hz. The WN-D34 is capable of a full 40 watts of power handling capacity when a crossover frequency of greater then 3800Hz is used.
 
VİEW BM-D340S data sheet

VİEW BM-D340S data sheet

ÖZELLİKLER :

The P Audio has redefined its BM series of compression drivers. The BMD340S is a state of the art high output compression driver. New developments P Audio Research and Development have produced new levels of performance. State of the art manufacturing methods insure extremely reliable and consistent designs. The BM-D340S is a small format titanium based diaphragm assembly mated to a close spaced circumferential phase plug geometry. The voice coil is a rectangular geometry, high temperature aluminum to insure extended high frequency response. This diaphragm geometry is ideally suited for foreground/background high performance pa systems. The 1.0 inch (25.4mm) throat exit makes the 340S an excellent choice for extended bandwidth and ultra high frequency applications such as three way designs. The BM-D340S is ideally suited for line array applications or other applications where a mid bass horn or direct radiator driver is also used. This small format throat and small format diaphragm insures wide dispersion at very high frequencies and is an excellent choice for three way systems or medium power two way designs. The 1.0 inch throat is compatible with a variety of P Audio horns and also compatible with industry standard 1.0 inch screw/threaded on horns. The Ferrite based permanent magnetic system produces a very high efficiency and value. This makes the BM-D340S ideal for professional applications as well as fixed installation systems. The medium format Ferrite permanent magnet produces a very high conversion efficiency.
 
WS-5TF

WS-5TF

The P Audio WS-5TF is a high fidelity in-wall (in-ceiling) loudspeaker system designed for applications where wide bandwidth and low frequency output is specified. The WS-5TF is basically a full range “hi-fi” system designed for permanent installation in a flush mount acoustic environment. The WS-5TF is a two way design that features a nominal 5 inch (127mm) diameter low frequency transducer and a 1 inch (25.4mm) diameter commercially pure titanium super tweeter. The crossover network has been computer optimized for the acoustic loading found in flush mount environments. The low frequency response is provided by a woven Kevlar cone that provides excellent mechanical damping to improve mid band fidelity and vocal clarity. The nominal 5 inch woofer design allows the system to present a very small cross-sectional area and fit into small locations. The small physical size of the system still produces excellent fidelity and extended frequency response, making the WS-5TF ideal for small format applications. The WS-5TF is optimized for both commercial and high performance in home designs. The grill and bezel may be painted to match any design or décor. The rugged metal grill is also ideal for industrial and retail locations.
 
VİEW PHT-408 data sheet

VİEW PHT-408 data sheet

ÖZELLİKLER :

The PHT-408 is a rectangular format high output integrated horn and driver. The system features a high sensitivity rating of 105dB at one watt and one meter. This makes the PHT-408 ideal for portable sound reinforcement system applications. The PHT-408 has been used very successfully in two way designs where the low frequency loudspeaker is a 12 inch or 15 inch professional quality transducer. The integrated horn and driver is used in many professional two way designs. The rated bandwidth of 2kHz to beyond 16kHz make this system ideal for two way system designs. The PHT-408 is ideal as a high frequency device for portable high performance sound reinforcement systems. The P Audio PHT-408 uses a small format diaphragm assembly that is optimized for wide band piston range response. This diaphragm format makes the compression driver perform well at extremely high frequencies. The rated coverage pattern offers included angles of 90 degree in the horizontal plane and 40 degree in the vertical plane. This dispersion pattern is ideal for wide coverage applications such as night clubs, pubs, and restaurant applications.
 
VİEW PHT-407N data sheet

VİEW PHT-407N data sheet

ÖZELLİKLER :

The PHT-407N is a horn loaded super tweeter designed for use in three way systems or small background two way designs. The PHT-407N offers a high sensitivity of 100dB SPL at one watt and one meter. This high sensitivity is achieved thru the use of a computer optimized neodymium based permanent magnet system. The PHT-407N offers a full 2dB of increased output capability over the Ferrite based PHT-407. This makes the system an excellent choice over conventional direct radiator tweeter designs when high acoustic output is required without a loss in operating bandwidth. The PHT-407N offers extended response to beyond 20 kHz. This makes the system a true super tweeter and, combined with the high, professional level, output capability mean the PHT-407N can be used in many applications where direct radiator high frequency devices are not capable. The high frequency horn is a rugged ABS resin with additional glass filling for both structural integrity and mechanical damping. The 1 inch diameter (25.4mm) diaphragm assembly and P Audio designed assembly methods make the device and excellent choice for high fidelity music systems in restaurants, pubs and retail
 
VİEW PHT-407 datasheet

VİEW PHT-407 datasheet

ÖZELLİKLER :

The PHT-407 is a horn loaded super tweeter designed for use in three way systems or small background two way designs. The PHT-407 offers a high sensitivity of 98dB SPL at one watt and one meter. This makes the system an excellent choice over conventional direct radiator tweeter designs when high acoustic output is required without a loss in operating bandwidth. The PHT-407 offers extended response to beyond 20kHz. The system a true super tweeter and, combined with the high, professional level, output capability mean the PHT-407 can be used in many applications where direct radiator high frequency devices are not capable. The high frequency horn is a rugged ABS resin with additional glass filling for both structural integrity and mechanical damping. The 1 inch diameter (25.4mm) diaphragm assembly and P Audio designed assembly methods make the device and excellent choice for high fidelity music systems in restaurants, pubs and retail spaces.
 
VİEW PHT-406 data sheet

VİEW PHT-406 data sheet

ÖZELLİKLER :

The P Audio PHT-406 is an integrated high frequency horn and compression driver. The design yields very extended high frequency response and controlled directivity in a circular geometry. This geometry produces a conical directivity pattern. This rated coverage pattern is ideal for short throw applications such as foreground and background music system designs found in restaurants, pubs, and retail environments. The PHT-406 has a rated bandwidth of 2 kHz to beyond 16kHz. This frequency response range makes the system excellent for wide coverage upper midrange and high frequency operation. The PHT-406 is ideally mated with a 10 inch, or 8 inch low frequency loudspeaker in a two way design. The PHT-406 features a 1 inch diameter (25.4mm) phenolic based diaphragm assembly. The small format (1 inch) diaphragm is ideal for maintaining piston range performance in the upper frequency range. The high sensitivity of 105 dB (1 watt at 1 meter) allows the PHT-406 to be used in medium sized venues. The horn is made of a rugged glass filed ABS plastic resin and the critical compression driver components are all controlled by P Audio’s advanced quality and manufacturing systems.
 
VİEW PHT-405 data sheet

VİEW PHT-405 data sheet

ÖZELLİKLER :

The P Audio PHT-405 is a high frequency horn coupled to a small format compression driver. The small format design insures extended high range response and break up free operation at extended frequencies. The PHT-405 has a rated frequency response of 2kHz to beyond 16kHz. This rated bandwidth allows the PHT-405 to be used in two way designs where the low frequency response is provided by an 8 inch or 10 inch woofer. Because the PHT-405 may be used to 2kHz the system is also usable for the high response in a two way system where the lower response is provided by a high output 12 inch woofer. The rated sensitivity of the PHT-405 is 105 dB with an electrical input of one watt and measured at a distance of one meter. The PHT-405 features a 1 inch diameter (25.4mm) phenolic based diaphragm assembly. The small format (1 inch) diaphragm is ideal for maintaining piston range performance in the upper frequency range. The geometry is square and is 4.5 inches (115mm) per side. The PHT-405 is made using a glass filled ABS material that provides both a high degree of structural support and excellent acoustic damping.
 
VİEW PHT-404P data sheet

VİEW PHT-404P data sheet

ÖZELLİKLER :

The P Audio PHT-404P is an integrated high frequency horn and compression driver. The design yields very extended high frequency response and controlled directivity in a rectangular geometry. The rated coverage pattern is 100 degree horizontal by 60 degree vertical. This rated coverage pattern is ideal for short throw applications such as foreground and background music system designs found in restaurants, pubs, and retail environments. The PHT-404P has a rated bandwidth of 3kHz to beyond 16kHz. This frequency response range makes the system excellent for wide coverage upper midrange and high frequency operation. The PHT-404P is ideally mated with a 10 inch, or 8 inch low frequency loudspeaker in a two way design. The PHT-404P features a 1 inch diameter (25.4mm) phenolic based diaphragm assembly. The small format (1 inch) diaphragm is ideal for maintaining piston range performance in the upper frequency range. The wide horizontal mouth (10.6 inches, 269mm) maintains very good horizontal coverage control. The high sensitivity of 105 dB (1 watt at 1 meter) allows the PHT-404P to be used in medium sized venues. The horn is made of a rugged glass filed ABS plastic resin and the critical compression driver components are all controlled by P Audio’s advanced quality and manufacturing systems.
 
VİEW PHT-404 data sheet

VİEW PHT-404 data sheet

ÖZELLİKLER :

The P Audio PHT-404 is an integrated high frequency horn and compression driver. The design yields very extended high frequency response and controlled directivity in a rectangular geometry. The rated coverage pattern is 100 degree horizontal by 60 degree vertical. This rated coverage pattern is ideal for short throw applications such as foreground and background music system designs found in restaurants, pubs, and retail environments. The PHT-404 has a rated bandwidth of 3kHz to beyond 16kHz. This frequency response range makes the system excellent for wide coverage upper midrange and high frequency operation. The PHT-404 is ideally mated with a 10 inch, or 8 inch low frequency loudspeaker in a two way design. The PHT-404 features a 1 inch diameter (25.4mm) phenolic based iaphragm assembly. The small format (1 inch) diaphragm is ideal for maintaining piston range performance in the upper frequency range. The wide horizontal mouth (10.6 inches, 269mm) maintains very good horizontal coverage control. The high sensitivity of 105 dB (1 watt at 1 meter) allows the PHT-404 to be used in medium sized venues. The horn is made of a rigid die cast aluminum and the critical compression driver components are all controlled by P Audio’s advanced quality and manufacturing systems.
 
VİEW HD-2100N data sheet

VİEW HD-2100N data sheet

ÖZELLİKLER :

The HD-2100N represents P Audio’s commitment to high quality systems that offer both performance and value. The HD-2100N uses a single PA-D120 compression driver to provide a program power rating of 120 watts. The high efficiency driver and mathematically correct horn flare can provide over 127 dB of sound pressure level at 1 meter. The HD-2100N is a large format design. The HD-2100N is a wide bandwidth design and intended to cover not only vocal fundamental frequencies but is optimized for reproduction of vocal harmonics as well. This bandwidth provided superior vocal intelligibility and clarity. The system features a frequency response of 200Hz to 3 kHz. Because the HD-2100N is available in both 8 ohm and 16 ohm impedance ratings, the system may be used in both medium and large format installations. The system is provided with an integral mounting bracket for fast and easy installation. The HD-2100N is a weather resistant design and ideal for paging applications where high reliability, high power handling, and excellent intelligibility are specified.
 
VİEW HD-5080 data sheet

VİEW HD-5080 data sheet

ÖZELLİKLER :

The HD-5080 features a rectangular mouth geometry ideal for applications where wide horizontal coverage is required as well as controlled and limited vertical coverage. This rectangular coverage is particularly suited for indoor applications where floor and ceiling reflections must be minimized to prevent a poor ratio of direct to reflected energy. The P Audio HD-5080 uses the very reliable PA-D110 compression driver in a reentrant wide band horn design. The system is available in both 8 ohm and 16 ohm impedance versions. The 16 ohm version is ideal when multiple paging horns must be used to cover increased areas. The system is provided with an integral mounting bracket for fast and easy installation. The system is weather resistant and is an ideal choice for small to medium format vocal range installations.
 
VİEW HD-1500 data sheet

VİEW HD-1500 data sheet

ÖZELLİKLER :

The P Audio HD-1500 is a medium format paging system designed for vocal range reproduction. The system features a P Audio PA-D110 compression driver mounted to an exponential horn flare designed to provide wide bandwidth coverage. The rated system bandwidth is 200Hz to 7 kHz. This bandwidth provides excellent vocal range intelligibility and clarity. The 75 watt program power rating makes the HD-1500 ideal for medium format outdoor and indoor applications. The HD-1500 is weather resistant and is an excellent choice for outdoor permanent installations. The HD-1500 is available in both 8 ohm and 16 ohm impedance ratings. This makes the system excellent for systems where multiple paging horns are required. The system is provided with an integral mounting bracket for fast and easy installation. Like all P Audio products, the HD-1500 benefits from advanced engineering and design methods as well as P Audio’s state of the art manufacturing systems. These advantages make the HD-1500 a world class paging systems that is ideal for a wide variety of vocal range sound reinforcement designs.
 
VİEW TH-300 data sheet

VİEW TH-300 data sheet

ÖZELLİKLER :

The P Audio TH-300 is a very high output paging system that features 4 PA- D110 compression drivers in a manifold configuration. This configuration allows the 4 drivers to sum into the TH-300 reentrant wide range horn. The TH-300 is rated for a program power of a full 300 watts and continuous operation of 200 watts. The system has been subjected to accelerated life tests for over 100 hours of non-stop operation. This reliability and power handling allow the TH-300 to produce over 130dB of sound pressure level at one meter. This provided excellent throw in large spaces. The TH-300 has a rated bandwidth of 200Hz to 7 kHz and is ideal for both vocal fundamentals as well as critical vocal harmonics. The extended bandwidth provides excellent intelligibility and vocal clarity. The TH-300 is available in either 8 ohm or 16 ohm versions. The 16 ohm version is ideal for applications where multiple TH-300 paging systems are specified in parallel for larger coverage applications. The system is provided with an integral mounting bracket for fast and easy installation. The TH-300 is weather resistant and ideal for use in both outdoor and indoor applications where voice range paging is required. The TH-300 is a large format design designed for high power and high sound pressure level applications.
 
VİEW 3725 data sheet

VİEW 3725 data sheet

ÖZELLİKLER :

The P Audio PH-3725 in a wall and ceiling mount wide range public address horn. the PH-3725 is designed to mount “on surface” rather than “in surface” (typical in surface systems are ceiling loudspeakers and wall mount loudspeakers) The system is ideal for general purpose paging in both indoor and outdoor environments. The PH-3725 is a unique two way design that features a 6.5 inch (165mm) Kevlar based horn loaded low frequency transducer and 1 inch (25.4mm) horn loaded high frequency transducer mounted in a medium format coaxial design. This allows for very wide bandwidth and excellent fidelity. The PH-3725 should be specified when a high degree of vocal intelligibility is required, as well as broadband music reproduction. The systems includes a four tap matching transformer that offers 40 watt, 20 watt, 10 watt, and 5 watt outputs for use in large distributed constant voltage systems. The nominal mid-band dispersion of 65 degrees horizontal by 30 degrees vertical insure excellent mid band clarity and long throw. The PH-3725 is well suited for outdoor applications but is equally suited for large indoor acoustic spaces as well. The PH-3725 is an injection molded design that utilizes high impact polycarbonate resin. The system is supplied with a “U” bracket for either on-wall or on-ceiling mounting. Both transducers feature P Audio’s ultra high temperature voice coil systems that insure high power handling and very high reliability.
 
CS-6F

CS-6F

The P Audio CS-6F is a nominal 6 inch (153mm) diameter full range ceiling loudspeaker system. The overall outside diameter of the system is 8.97 inches (227mm). The CS-6F offers a full 15 watts of program power handling, making the system ideal for medium height ceiling installations. The CS-6F exhibits wide bandwidth and has a rated frequency response of 80Hz to 20 kHz. The CS-6F was designed for background music systems as well as vocal range reproduction. The CS-6F has an integral mounting system that will accommodate a variety of ceiling materials and dimensions.
 
WS-5HP

WS-5HP

The P Audio WS-5HP is a high fidelity in-wall (in-ceiling) loudspeaker system designed for applications where wide bandwidth and low frequency output is specified. The WS-5HP is basically a full range “hi-fi” system designed for permanent installation in a flush mount acoustic environment. The WS-5HP is a two way design that features a nominal 5 inch (127mm) diameter low frequency transducer and a 1 inch (25.4mm) diameter Mylar based super tweeter. The crossover network has been computer optimized for the acoustic loading found in flush mount environments. The low frequency response is provided by a molded polypropylene cone that provides excellent bass response and clarity. The nominal 5 inch woofer design allows the system to present a very small cross-sectional area and fit into small locations. The small physical size of the system still produces excellent fidelity and extended frequency response, making the WS-5HP ideal for small format applications. The WS-5HP is optimized for both commercial and high performance in home designs. The grill and bezel may be painted to match any design or décor. The rugged metal grill is also ideal for industrial and retail locations.
 
VİEW SN6-200N data sheet

VİEW SN6-200N data sheet

ÖZELLİKLER :

The P Audio SN6-200N is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-200N is an upgraded design that features many of P Audios new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN6-200N has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN6-200N features a 2 inch (50.8mm) diameter voice coil that provides an AES rated 200 watts of continuous power handling and a full 800 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-200N utilizes P Audios Auto Balanced Cooling (ABC)technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision flat wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The SN6-200N utilizes a very high technology carbon fiber composite dust cap design to insure very high rigidity and extended piston range performance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
 
WS-6HP

WS-6HP

The P Audio WS-6HP is a high fidelity in-wall (in-ceiling) loudspeaker system designed for applications where wide bandwidth and low frequency output is specified. The WS-6HP is basically a full range “hi-fi” system designed for permanent installation in a flush mount acoustic environment. The WS-6HP is a two way design that features a 6 inch (152mm) diameter low frequency transducer and a 1 inch (25.4mm) diameter Mylar based super tweeter. The crossover network has been computer optimized for the acoustic loading found in flush mount environments. The low frequency response is provided by a molded polypropylene cone that provides excellent bass response and high reliability. The 6 inch woofer design allows the system to present a small cross-sectional area and fit into small locations. The WS-6HP is optimized for both commercial and high performance in home designs. The grill and bezel may be painted to match any design or décor. The rugged metal grill is also ideal for industrial and retail locations.
 
WS-6TF

WS-6TF

The P Audio WS-6TF is a high fidelity in-wall (in-ceiling) loudspeaker system designed for applications where wide bandwidth and low frequency output is specified. The WS-6TF is basically a full range “hi-fi” system designed for permanent installation in a flush mount acoustic environment. The WS-6TF is a two way design that features a 6 inch (152mm) diameter low frequency transducer and a 1 inch (25.4mm) diameter commercially pure titanium super tweeter. The crossover network has been computer optimized for the acoustic loading found in flush mount environments. The low frequency response is provided by a woven Kevlar cone that provides excellent mechanical damping to improve mid band fidelity and vocal clarity. The 6 inch woofer design allows the system to present a small cross-sectional area and fit into small locations. The WS-6TF is optimized for both commercial and high performance in home designs. The grill and bezel may be painted to match any design or décor. The rugged metal grill is also ideal for industrial and retail locations.
 
WS-8HPT

WS-8HPT

The P Audio WS-8HPT is a high fidelity in-wall (in-ceiling) loudspeaker system designed for applications where wide bandwidth and low frequency output is specified. The system features a wide bandwidth line matching transformer that allows the WS-8HPT to be used in larger office environments where distributed systems are specified. The line matching transformer offers tap values of 25 watts, 12.5 watts, and 6 watts, as well as an 8 ohm direct input. The WS-8HPT is basically a full range “hi-fi” system designed for permanent installation in a flush mount acoustic environment. The WS-8HPT is a two way design that features an 8 inch (203mm) diameter low frequency transducer and a 1 inch (25.4mm) diameter Mylar based super tweeter. The crossover network has been computer optimized for the acoustic loading found in flush mount environments. The low frequency response is provided by a molded polypropylene cone that provides excellent bass response and high reliability. The WS-8HPT is optimized for both commercial and high performance in home designs. The grill and bezel may be painted to match any design or décor. The rugged metal grill is also ideal for industrial and retail locations.
 
WS-8HP

WS-8HP

The P Audio WS-8HP is a high fidelity in-wall (in-ceiling) loudspeaker system designed for applications where wide bandwidth and low frequency output is specified. The WS-8HP is basically a full range “hi-fi” system designed for permanent installation in a flush mount acoustic environment. The WS-8HP is a two way design that features an 8 inch (203mm) diameter low frequency transducer and a 1 inch (25.4mm) diameter Mylar based super tweeter. The crossover network has been computer optimized for the acoustic loading found in flush mount environments. The low frequency response is provided by a molded polypropylene cone that provides excellent bass response and high reliability. The WS-8HP is optimized for both commercial and high performance in home designs. The grill and bezel may be painted to match any design or décor. The rugged metal grill is also ideal for industrial and retail locations. Frequency
 
WS-8TF

WS-8TF

The P Audio CS family of ceiling speakers represents a full line of products designed for in-ceiling mounting. The CS-2F is a 4 inch (100mm) outside bezel diameter ceiling system that features a 2 inch (50.8mm) diameter full range transducer. The CS-2F is an extremely small format system designed for use in small rooms such as fitting rooms, restrooms and small offices. The CS-2 is available in both a low impedance version, the CS-2F or a high impedance version, the CS-2FT. The CS-2FT may be used in larger distributed systems where constant voltage designs are used. The transformer provides power taps of 10 watts, 5 watts and 2.5 watts and offers wide bandwidth response to maintain signal fidelity. The rated sensitivity of 81dB (1W@1M) makes the CS-2 ideal for low ceiling acoustic spaces The CS-2F and CS-2FT are rated at 6 watts of music power and, combined with P Audio’s high reliability voice coil designs, will provide high fidelity wide range background music and speech reinforcement for small acoustic spaces that require reinforcement systems. Integral mounting tabs are supplied to make installation easy and quick.
 
CS-2FT

CS-2FT

The P Audio CS family of ceiling speakers represents a full line of products designed for in-ceiling mounting. The CS-2F is a 4 inch (100mm) outside bezel diameter ceiling system that features a 2 inch (50.8mm) diameter full range transducer. The CS-2F is an extremely small format system designed for use in small rooms such as fitting rooms, restrooms and small offices. The CS-2 is available in both a low impedance version, the CS-2F or a high impedance version, the CS-2FT. The CS-2FT may be used in larger distributed systems where constant voltage designs are used. The transformer provides power taps of 10 watts, 5 watts and 2.5 watts and offers wide bandwidth response to maintain signal fidelity. The rated sensitivity of 81dB (1W@1M) makes the CS-2 ideal for low ceiling acoustic spaces The CS-2F and CS-2FT are rated at 6 watts of music power and, combined with P Audio’s high reliability voice coil designs, will provide high fidelity wide range background music and speech reinforcement for small acoustic spaces that require reinforcement systems. Integral mounting tabs are supplied to make installation easy and quick.
 
CS-2F

CS-2F

The P Audio CS family of ceiling speakers represents a full line of products designed for in-ceiling mounting. The CS-2F is a 4 inch (100mm) outside bezel diameter ceiling system that features a 2 inch (50.8mm) diameter full range transducer. The CS-2F is an extremely small format system designed for use in small rooms such as fitting rooms, restrooms and small offices. The CS-2 is available in both a low impedance version, the CS-2F or a high impedance version, the CS-2FT. The CS-2FT may be used in larger distributed systems where constant voltage designs are used. The transformer provides power taps of 10 watts, 5 watts and 2.5 watts and offers wide bandwidth response to maintain signal fidelity. The rated sensitivity of 81dB (1W@1M) makes the CS-2 ideal for low ceiling acoustic spaces The CS-2F and CS-2FT are rated at 6 watts of music power and, combined with P Audio’s high reliability voice coil designs, will provide high fidelity wide range background music and speech reinforcement for small acoustic spaces that require reinforcement systems. Integral mounting tabs are supplied to make installation easy and quick.
 
CS-3FT

CS-3FT

The P Audio CS family of ceiling speakers represents a full line of products designed for in-ceiling mounting. The CS-3F is a 5.5 inch (140mm) outside bezel diameter ceiling system that features a 3 inch (76.2mm) diameter full range transducer. The CS-3F is an extremely small format system designed for use in small rooms such as fitting rooms, restrooms and small offices. The CS-3 is available in both a low impedance version, the CS-3F or a high impedance version, the CS-3FT. The CS-3FT may be used in larger distributed systems where constant voltage designs are used. The transformer provides power taps of 10 watts, 5 watts, and 2.5 watts and offers wide bandwidth response to maintain signal fidelity. The CS-3 ceiling loudspeakers offer a rated sensitivity of 83 dB (1W@1M).This sensitivity makes the CS-3F and CS-3FT ideal for small to medium sized rooms and acoustic spaces. The CS-3F and CS-3FT are rated at 8 watts of music power and, combined with P Audio’s high reliability voice coil designs, will provide high fidelity wide range background music and speech reinforcement for small acoustic spaces that require reinforcement systems. Integral mounting tabs are supplied to make installation easy and quick.
 
CS-3F

CS-3F

The P Audio CS family of ceiling speakers represents a full line of products designed for in-ceiling mounting.The CS-3F is a 5.5 inch (140mm) outside bezel diameter ceiling system that features a 3 inch (76.2mm) diameter full range transducer.The CS-3F is an extremely small format system designed for use in small rooms such as fitting rooms, restrooms and small offices. The CS-3 is available in both a low impedance version, the CS-3F or a high impedance version, the CS-3FT. The CS-3FT may be used in larger distributed systems where constant voltage designs are used. The transformer provides power taps of 10 watts, 5 watts, and 2.5 watts and offers wide bandwidth response to maintain signal fidelity. The CS-3 ceiling loudspeakers offer a rated sensitivity of 83 dB (1W@1M).This sensitivity makes the CS-3F and CS-3FT ideal for small to medium sized rooms and acoustic spaces. The CS-3F and CS-3FT are rated at 8 watts of music power and, combined with P Audio’s high reliability voice coil designs, will provide high fidelity wide range background music and speech reinforcement for small acoustic spaces that require reinforcement systems. Integral mounting tabs are supplied to make installation easy and quick.
 
CS-5FT

CS-5FT

The P Audio CS-5FT is a nominal 5 inch (127mm) diameter full range ceiling loudspeaker system. The overall outside diameter of the system is 7.95 inches (202mm). the CS-5FT offers a full 15 watts of program power handling, making the system ideal for medium height ceiling installations. The unit is equipped with a wide bandwidth line matching transformer for large scale distributed installations. The power taps are 10 watts, 5 watts, and 2.5 watts. The CS-5FT exhibits wide bandwidth and has a rated frequency response of 80Hz to 20 kHz. The CS-5FT was designed for background music systems as well as vocal range reproduction. The CS-5FT has an integral mounting system that will accommodate a variety of ceiling materials and dimensions.
 
CS-5F

CS-5F

The P Audio CS-5F is a nominal 5 inch (127mm) diameter full range ceiling loudspeaker system. The overall outside diameter of the system is 7.95 inches (202mm). The CS-5F offers a full 15 watts of program power handling, making the system ideal for medium height ceiling installations. The CS-5F exhibits wide bandwidth and has a rated frequency response of 80Hz to 20 kHz. The CS-5F was designed for background music systems as well as vocal range reproduction. The CS-5F has an integral mounting system that will accommodate a variety of ceiling materials and dimensions.
 
CS-5CFT

CS-5CFT

The CS-5CF and CS-5CFT are 5 inch (127mm) high performance coaxial ceiling speakers. Coaxial designs offer superior vocal range intelligibility as well as extended high frequency response. The overall outside diameter of the system is 7.95 inches (202mm). The CS-5CF produces a rated bandwidth of 70Hz to beyond 20 kHz. This extended response allows the system to be used for high fidelity full range program material. The coaxial system is rated for a full 25 watts of program material and also provides excellent long term reliability. The CS-5CFT is equipped with a wide bandwidth line matching transformer. The transformer offers power taps of 10 watts, 5 watts, and 2.5 watts, making the unit and excellent choice for larger distributed paging and background music systems. Both the CS-5CF and CS-5CFT have an integral mounting system that will accommodate a variety of ceiling materials and dimensions. The CS-5 family is well suited for medium format acoustic spaces with average ceiling heights. The Coaxial design allows the CS-5 loudspeakers to be specified for both high fidelity background music systems and paging systems where high levels of intelligibility are required.
 
WS-5HPT

WS-5HPT

The P.Audio WS-5HPT is a high fidelity in-wall (in-ceiling) loudspeaker system designed for applications where wide bandwidth and low frequency output is specified. The WS-5HPT is basically a full range “hi-fi” system designed for permanent installation in a flush mount acoustic environment. The WS-5HPT is a two way design that features a nominal 5 inch (127mm) diameter low frequency transducer and a 1 inch (25.4mm) diameter Mylar based super tweeter. The crossover network has been computer optimized for the acoustic loading found in flush mount environments. The low frequency response is provided by a molded polypropylene cone that provides excellent bass response and clarity. The system features a wide bandwidth line matching (constant voltage) transformer with 10 watt, 5 watt, and 2.5 watt power taps. This combination insures flexibility when matching system output levels to acoustic space requirements. The nominal 5 inch woofer design allows the system to present a very small cross-sectional area and fit into small locations. The small physical size of the system still produces excellent fidelity and extended frequency response, making the WS-5HPT ideal for small format applications. The WS-5HPT is optimized for both commercial and high performance in home designs. The grill and bezel may be painted to match any design or décor. The rugged metal grill is also ideal for industrial and retail locations.
 
 
© 2015 Aynalı Küre | Tüm hakları saklıdır. | Aynalı Küre - Baraj Aydınlatma Kuruluşudur.
Web tasarım Grimor
Bugün : 205 | Toplam Ziyaretçi : 629664